30 April 2021 in Eastern-European Journal of Enterprise Technologies
A vegetable storage facility is an energy-consuming object with distributed parameters. The quality of product storage depends on the microclimate in the vegetable storage facility: current temperature, humidity, and carbon dioxide level. Existing temperature controllers in a vegetable storage facility use a two-position law of control, which leads to the consumption of excess energy and product spoilage. The purpose of the study is to improve the work of the controller in the process of product storage at the storage phase due to closing the two-position controller through feedback in the form of a first-order aperiodic link. To achieve the goal, the procedure for calculating the transfer function of a control object through the equation of thermal balance was used. This procedure made it possible to take into consideration the parameters of a vegetable storage facility: the area and the type of thermal insulation material of floorings, the weight, and the type of a stored product, as well as thermal energy supplied to the vegetable storage facility. Based on the heat balance equation, the nature of the operation of controlling elements, transfer functions of a vegetable storage facility without a product, and the vegetable storage facility filled with a product, were calculated. The heat model of a vegetable storage facility was constructed in the MATLAB Simulink environment (USA) to check the algorithms of the temperature field control. The product storage for 180 days with changes in the daily temperature of outdoor air from minus 8 °C to plus 2 °C and changes in humidity from 50 % to 100 % was modeled. According to the results of modeling, it is possible to conclude that the addition of an aperiodic link to the feedback of the two-position controller will enable taking into consideration the inertia of a control object. This allows decreasing the maximum error in control of self-oscillations to 0.15 °C and decreasing the total operation time of controlling elements by 13 %
16 July 2024 in Bulletin of the National Technical University "KhPI" A series of "Information and Modeling"
In this work, analytical expressions for the connection between optimization criteria andsettings parameters of the adaptive PI-PID controller with variable parameters of the object andadaptive filter have been removed. A method for synthesizing a model of discrete controllersbased on given dynamic characteristics has been developed. A method has been developed forsynthesizing a model of a discrete PID controller based on given dynamic characteristics basedon the criterion of the transient process of a guaranteed level of stability. 3 figures, 0 tables, 32formulas, 19 bibliographic sources..Analytical expressions have been removed to link the optimization criteria andadjustment parameters of the adaptive PI-PID controller with the variable parameters of theobject and adaptive filter.A method for synthesizing a model of discrete controllers from specified dynamiccharacteristics has been developed. The average warehouse of output pulses at the output of anonlinear channel, which is formed at the output of such a regulator and is seen as an inertialinduced uninterrupted part, changes according to the law, which is designated as a reversetransmission the function of the lanyard of the new molded filter model at the collar of the non-linear element.A method has been developed for synthesizing a model of a discrete PID controller fromspecified dynamic characteristics based on the criterion of the required transient process of aguaranteed stability level.The modeling showed that while the parameters of the object and the adaptive filter willchange during the ASC operation, then, obviously, the optimal parameters for adjusting theadaptive PID controller will immediately change.
1 March 2024 in Інформаційно-керуючі системи на залізничному транспорті
Models for identification of parameters and structure of a complex dynamic moving object (MO) have been improved for the construction of adaptive control systems (ACS) for correcting the parameters of regulator settings.It is shown that the parametric output of the adaptive digital filter can be used both for the automatic adjustment of the parameters of the controlled filter and for the automatic adjustment of the controller parameters in the regulation circuit of the control system in a limited range of changes in the adaptation coefficient, which expands the scope of the proposed identification method. The values of the coefficients of the denominator of the forming filter of the model are successively changed to the identified values of the coefficients of the transfer function of the object a1, a2…an-1 to find new values of the coefficients an. In the automatic mode of operation, previously identified values of the coefficients of the object must be remembered and entered into the forming filter, changing its structure and order, to calculate the value of the next coefficient of the object. After identifying the necessary values of the transfer function coefficients of the object a1, a2…an, the identification process is repeated sequentially in each cycle of transient processes of the control system. The connection of the object to the corresponding inputs-outputs of the forming filters of the identification device is carried out by a logical device. Удосконалено моделі ідентифікації параметрів та структури складного динамічного рухомого об'єкта (РО) для побудови адаптивних систем керування (АСК) для корекції параметрів налаштування регуляторів.Показано, що параметричний вихід адаптивного цифрового фільтра можна використовувати як при автоматичному коригуванні параметрів керованого фільтра так і при автоматичному коригуванні параметрів регулятора в контурі регулювання системи керування в обмеженому діапазоні змін коефіцієнта адаптації, що розширює сферу застосування запропонованого методу ідентифікації. Значення коефіцієнтів знаменника формуючого фільтру моделі послідовно змінюються на ідентифіковані значення коефіцієнтів передавальної функції об'єкта a1, a2…an-1 для знаходження нових значень коефіцієнтів an. В автоматичному режимі роботи ідентифіковані раніше значення коефіцієнтів об'єкта повинні запам'ятовуватися і вводиться у формуючий фільтр, змінюючи його структуру та порядок, для обчислення значення величини наступного коефіцієнта об'єкта. Після ідентифікації необхідних значень коефіцієнтів передавальної функції об'єкта a1, a2…an процес ідентифікації повторюється послідовно у кожному циклі перехідних процесів системи керування. Підключення об'єкта до відповідних входів-виходів формуючих фільтрів пристрою ідентифікації здійснюється логічним пристроєм.
30 October 2023 in Bulletin of V.N. Karazin Kharkiv National University, series «Mathematical modeling. Information technology. Automated control systems»
The paper substantiates the method of automatic identification of the variance of random useful signals and random interference with given values of spectral-correlation characteristics, which allows determining the current estimates of the variance and their change for arbitrary random influences with unknown characteristics. It is shown that the parametric output of the adaptive digital filter can be used to automatically adjust the controller parameters in the control loop of the control system in the adaptation range of the adaptation coefficient, taking into account the bit depth of the ADC and DAC converters, which expands the scope of the proposed identification method. Relevance. The relevance of the work lies in the possibility of synthesizing the structure and modeling of adaptive digital shaping filters. Research methods. The main research method is the method of automatic identification of the variance of random useful signals and random interference with given values of spectral-correlation characteristics, which allows determining the current estimates of the variance and their change for arbitrary random influences with unknown characteristics. Results. It is shown that the parametric output of the adaptive digital filter can be used to automatically adjust the controller parameters in the control loop of the control system in the adaptation range of the adaptation coefficient, taking into account the bit depth of the ADC and DAC converters, which expands the scope of the proposed identification method. Conclusions. A method for automatic identification of the variance of random useful signals and random interference with given values of spectral-correlation characteristics has been substantiated, which allows determining current estimates of the variance and their change for arbitrary random influences with unknown characteristics. Automatic identification of the statistical parameters of random signals and interference in the forming adaptive filter allows taking into account their change in the optimal parameters of control system tuning. The formulas for calculating the optimal value of the adaptive filter constant time depending on the adaptation coefficient Kb, which characterize the assessment of the current ratio of the levels of the useful signal and the interference, are obtained. It is shown that the parametric output of the adaptive digital filter can be used to automatically adjust the controller parameters in the control loop of the control system in a limited range of changes in the amplitude and frequency characteristics of the useful signal and interference in the adaptation range of the adaptation coefficient at specified ratios or taking into account the bit depth of the ADC and DAC converters, which expands the scope of the proposed identification method. The simulation results on the software model of the adaptive digital filter (m-file of the modulation program) and the graphs of the simulation results showed a high interference suppression coefficient in the entire range of its change and a change in the interference level at the AF output depending on the input signal level. When the input noise level increases, the output noise level decreases. When the AFs are connected in series, the overall adaptation coefficient Kb*Kb*...automatically increases.
21 May 2026 in Таврійський науковий вісник. Серія: Технічні науки
У статті досліджено проблему недостатньо ефективного використання вантажопідйомності та корисного об’єму транспортних засобів у сучасних логістичних системах, що негативно впливає на економічні показники перевезень, рівень транспортного сервісу та загальну ефективність функціонування ланцюгів постачання. Встановлено, що традиційні підходи до планування завантаження, які ґрунтуються переважно на ручних розрахунках, практичному досвіді диспетчерів і спрощених схемах прийняття рішень, не дають змоги забезпечити раціональний розподіл вантажів між транспортними засобами. Це зумовлено значною кількістю параметрів, які необхідно одночасно враховувати, зокрема масою, об’ємом, кількістю вантажних місць, обмеженнями транспортних засобів та умовами доставки. Обґрунтовано доцільність автоматизації процесів планування завантаження на основі математичного моделювання та методів оптимізації. Запропоновано формалізовану математичну модель розподілу вантажів між транспортними засобами з урахуванням масових і об’ємних обмежень, а також умови унікальності призначення кожного вантажу лише одному транспортному засобу. Задачу сформульовано як задачу цілочислового лінійного програмування, що створює основу для використання сучасних програмних засобів підтримки прийняття рішень. Визначено, що застосування автоматизованого підходу до планування завантаження дозволяє підвищити коефіцієнт використання вантажопідйомності та місткості транспортних засобів, скоротити кількість частково завантажених рейсів, зменшити холості пробіги та знизити загальні логістичні витрати. Отримані результати підтверджують практичну значущість використання оптимізаційних моделей у транспортній логістиці та доцільність їх подальшого впровадження в діяльність автотранспортних підприємств і логістичних операторів.