13 November 2023 in Nuclear Fusion
It is crucial to form a hot spot that can drive a self-heating nuclear burn propagation into the surrounding cold fuel in ignition process of laser fusion. In this paper, we discuss the formation of a hemispherical hot spot located at the edge of an end-on precompressed isochoric fuel instead of a central spherical hot spot surrounded by cold fuel in a corona plasma shell. This configuration leads to a new energy loss mechanism named hot spot collapse, which originates from mass loss of the hot spot through the interface with the vacuum. A semi-analytical model is proposed including particle induced burning, hot spot collapse and other energy loss processes. Then a modified ignition criterion is derived. The results show that the competition between the hot spot collapse and the burn propagation is crucial in the formation of the hot spot. The formation of such a hot spot at end-on precompressed isochoric fuels would require a somewhat higher initial temperature of for a hot spot with an initial areal density . Simulations are performed with a 3D hybrid particle-in-cell/fluid code for the heating process by fast electrons and a 3D radiation hydrodynamics code for the burning process. Simulation results agree with the model. Our optimized result shows a 10 ps heating laser pulse with an energy as low as 39 kJ can lead to a fast ignition in the ideal case. This study provides an effective reference for design and evaluation of experiments planned for fast ignition schemes.
15 July 2025 in Physical Review E
Magnetized fusion has been used in various inertial confinement fusion concepts to relax ignition requirements. Strong magnetic fields would induce burning asymmetry, which may be usually harmful to the central ignition schemes. However, it could be utilized in some intrinsically asymmetric ignition schemes, such as the traditional fast ignition (FI) scheme and the double-cone ignition (DCI) scheme, in which the hot spots are located at the edge of the compressed fuel. In this paper, an analytical model and a three-dimensional MHD code are developed to study the asymmetric burning propagation and related effects in magnetic fields. It is found that the magnetic field can guide a directional and faster burning propagation along the parallel direction to the B-field by the anisotropic α -particle transport, providing a method to control the burning behavior. The B-field also leads to a faster increase in the hot spot temperature. Simulation shows that 10 kT B-fields, corresponding to the α -particle Hall parameter of H α ∼ 0.5 , would increase the hot spot temperature by 38% and the burning propagation speed by 44% in FI and DCI conditions, leading to an 87% increase of the fusion output energy and an 18% increase of hot spot mass. This study could also provide a direct reference for assessing the burning asymmetry in the magnetized ICF schemes.
1 November 2025 in Physics of Plasmas
The detonation behaviors during thermonuclear burning indicate a state of robust hot spot burning and are widely present in astronomical phenomena, such as supernovae. In this work, we propose an analytical model including α-particle deposition at the shock front, which significantly lowers the detonation threshold in the deuterium–tritium mixture. The new temperature threshold is 13.4 keV for the isochoric ignition and 25.1 keV for the isobaric ignition, both of which are more accessible experimentally. When a shock wave is present, α-particle deposition occurs at the high-density shock front instead of the cold fuel, accelerating the burning wave by approximately 20%. To further validate these findings, we conducted a series of three-dimensional radiation hydrodynamics simulations using finite isochoric hot spots with different fast electron energies. The results revealed a rise in burn-up fraction caused by the detonation wave with a deposited fast electron energy of about 8.5 kJ. This work can provide a reference for the realization of fusion energy via fast ignition schemes, such as the double-cone ignition scheme. This work also shows the possibility of studying detonation in astrophysics with laser-driven fast ignition.
1 October 2026 in Physics of Plasmas
High-density and high-areal-density plasmas are the fundamental prerequisites for fusion ignition in inertial confinement fusion. To generate such plasma conditions via the double-cone ignition (DCI) scheme, a laser facility delivering 160 kJ nanosecond laser pulses is currently under construction in Shanghai. In this work, we propose a compression-stage optimization method for colliding plasmas that integrates two-dimensional radiation hydrodynamics simulations with a genetic algorithm (GA). We show that an isochoric colliding plasma with a peak density of 409 g/cm3 and an areal density of 1.63 g/cm2 can be achieved. We also identify an optimal implosion velocity range of about 251–283 km/s for the plasma jet-collision process for this 160 kJ facility, which can be described by a physically interpretable fit curve. To enable large-scale, high-fidelity predictions of colliding plasma behavior, we develop a neural network ensemble surrogate model trained on over 20 000 simulation datasets derived from the aforementioned GA optimization. This surrogate model takes laser pulse shapes and target geometric parameters as inputs to predict the key plasma parameters, including peak density, areal density, and implosion velocity. The model achieves predictions with an average relative error below 3% and accelerates the optimization process by more than two orders of magnitude compared to direct MULTI-2D simulations. This work establishes a solid foundation for the rapid design and parameter optimization of future DCI experiments.
18 November 2026 in Proceedings of the National Academy of Sciences of the United States of America
In fast ignition inertial confinement fusion, a “heating cone” is employed to shorten the transport distance of the relativistic electron beam (REB) to the high-density plasma core, thereby mitigating energy losses at the plasma edge. However, its insertion depth and survival time are constrained by the sustained pressure from the large-scale plasma edge during the implosion process. Our whole-process simulations demonstrated that, in the double-cone ignition scheme, the head-on collision of two deuterium-tritium plasma jets not only forms a high-density plateau with a small-scale edge, but also substantially reduces the interaction time between the heating cone and the colliding plasma to approximately . This shortened interaction time enables the heating cone to remain intact after the peak compression, even when placed directly at the small-scale edge of the colliding plasma. The small-scale edge is compatible with the range of the soft-spectrum REB generated by the heating lasers. Such a REB efficiently heats a localized end-on hot spot adjacent to the high-density plateau, guided by a kT-level magnetic field amplified from a seed field during the collision process. Ignited by the localized hot spot, the high-density plateau can undergo sufficient burning and achieve a fusion energy gain of 6.8 using heating lasers.
16 November 2026 in Physical Review Letters