31 July 2025 in Nature Communications
Characterizing black carbon (BC) on a fine scale globally is essential for understanding its climate and health impacts. However, sparse BC mass measurements in different parts of the world and coarse model resolution have inhibited evaluation of global BC emission inventories. Here, we apply globally distributed BC mass measurements from the Surface Particulate Matter Network (SPARTAN) and complementary measurement networks to evaluate contemporary BC emission inventories. We use a global chemical transport model (GEOS-Chem) in its high-performance configuration (GCHP) for high-resolution simulations to relate BC emissions to ambient concentrations for comparison with measurements. Here we find that simulations using the Community Emissions Data System (CEDS) emission inventory exhibit skill (r2 = 0.73) in representing variability in SPARTAN measurements across primarily developed regions with low BC concentrations but exhibit pronounced discrepancy (r2 = 0.00019) across high-BC regions in the Global South, underestimating BC by 38%. Alternative inventories (EDGAR, HTAP) yield similar results. These findings motivate renewed attention to the challenging task of characterizing BC emissions from low- and middle-income countries.
16 October 2024 in Atmospheric Chemistry and Physics
Ambient fine particulate matter (PM2.5) is the leading global environmental determinant of mortality. However, large gaps exist in ground-based PM2.5 monitoring. Satellite remote sensing of aerosol optical depth (AOD) offers information to help fill these gaps worldwide when augmented with a modeled PM2.5–AOD relationship. This study aims to understand the spatial pattern and driving factors of this relationship by examining η ( ) using both observations and modeling. A global observational estimate of η for the year 2019 is inferred from 6870 ground-based PM2.5 measurement sites and satellite-retrieved AOD. The global chemical transport model GEOS-Chem, in its high-performance configuration (GCHP), is used to interpret the observed spatial pattern of annual mean η. Measurements and the GCHP simulation consistently identify a global population-weighted mean η value of 96–98 µg m−3, with regional values ranging from 59.8 µg m−3 in North America to more than 190 µg m−3 in Africa. The highest η value is found in arid regions, where aerosols are less hygroscopic due to mineral dust, followed by regions strongly influenced by surface aerosol sources. Relatively low η values are found over regions distant from strong aerosol sources. The spatial correlation of observed η values with meteorological fields, aerosol vertical profiles, and aerosol chemical composition reveals that spatial variation in η is strongly influenced by aerosol composition and aerosol vertical profiles. Sensitivity tests with globally uniform parameters quantify the effects of aerosol composition and aerosol vertical profiles on spatial variability in η, exhibiting a population-weighted mean difference in aerosol composition of 12.3 µg m−3, which reflects the determinant effects of composition on aerosol hygroscopicity and aerosol optical properties, and a population-weighted mean difference in the aerosol vertical profile of 8.4 µg m−3, which reflects spatial variation in the column–surface relationship.
4 May 2023 in Atmospheric Chemistry and Physics
Accurate representation of aerosol optical properties is essential for the modeling and remote sensing of atmospheric aerosols. Although aerosol optical properties are strongly dependent upon the aerosol size distribution, the use of detailed aerosol microphysics schemes in global atmospheric models is inhibited by associated computational demands. Computationally efficient parameterizations for aerosol size are needed. In this study, airborne measurements over the United States (DISCOVER-AQ) and South Korea (KORUS-AQ) are interpreted with a global chemical transport model (GEOS-Chem) to investigate the variation in aerosol size when organic matter (OM) and sulfate–nitrate–ammonium (SNA) are the dominant aerosol components. The airborne measurements exhibit a strong correlation (r=0.83) between dry aerosol size and the sum of OM and SNA mass concentration (MSNAOM). A global microphysical simulation (GEOS-Chem-TOMAS) indicates that MSNAOM and the ratio between the two components ( ) are the major indicators for SNA and OM dry aerosol size. A parameterization of the dry effective radius (Reff) for SNA and OM aerosol is designed to represent the airborne measurements (R2=0.74; slope = 1.00) and the GEOS-Chem-TOMAS simulation (R2=0.72; slope = 0.81). When applied in the GEOS-Chem high-performance model, this parameterization improves the agreement between the simulated aerosol optical depth (AOD) and the ground-measured AOD from the Aerosol Robotic Network (AERONET; R2 from 0.68 to 0.73 and slope from 0.75 to 0.96). Thus, this parameterization offers a computationally efficient method to represent aerosol size dynamically.
2 October 2025 in Geoscientific Model Development
Accurate representation of mineral dust remains a challenge for global air quality or climate models due to inadequate parametrization of the emission scheme, removal mechanisms, and size distribution. While various studies have constrained aspects of dust emission fluxes and/or dust optical depth, annual mean surface dust concentrations still vary by factors of 5–10 among models. In this study, we focus on improving the annual simulation of fine dust in the GEOS-Chem chemical transport model, leveraging recent mechanistic understanding of dust source and removal, and reconciling the size differences between models and ground-based measurements. Specifically, we conduct sensitivity simulations using GEOS-Chem in its high performance configuration (GCHP) version 14.4.1 to investigate the effects of mechanism or parameter updates on annual mean concentrations. The results are evaluated by comparisons versus Deep Blue satellite-based aerosol optical depth (AOD) and AErosol RObotic NETwork (AERONET) ground-based AOD for total column abundance, and versus the Surface Particulate Matter Network (SPARTAN) for novel measurements of surface PM2.5 dust concentrations. Reconciling modelled geometric diameter versus measured aerodynamic diameter is important for consistent comparison. The two-fold overestimation of surface fine dust in the standard model is alleviated by 39 % without degradation of total column abundance by implementing a new physics-based dust emission scheme with better spatial distribution. Further reduction by 20 % of the overestimation of surface PM2.5 dust is achieved through reducing the mass fraction of emitted fine dust based on the brittle fragmentation theory, and explicit tracking of three additional fine mineral dust size bins with updated parametrization for below-cloud scavenging. Overall, these developments reduce the normalized mean difference against surface fine dust measurements from SPARTAN from 94 % to 35 %, while retaining comparable skill of total column abundance against satellite and ground-based AOD.
14 October 2024 in Journal of Advances in Modeling Earth Systems
Global modeling of aerosol‐particle number and size is important for understanding aerosol effects on Earth's climate and air quality. Fine‐resolution global models are desirable for representing nonlinear aerosol‐microphysical processes, their nonlinear interactions with dynamics and chemistry, and spatial heterogeneity. However, aerosol‐microphysical simulations are computationally demanding, which can limit the achievable global horizontal resolution. Here, we present the first coupling of the TwO‐Moment Aerosol Sectional (TOMAS) microphysics scheme with the High‐Performance configuration of the GEOS‐Chem model of atmospheric composition (GCHP), a coupling termed GCHP‐TOMAS. GCHP's architecture allows massively parallel GCHP‐TOMAS simulations including on the cloud, using hundreds of computing cores, faster runtimes, more memory, and finer global horizontal resolution (e.g., 25 km × 25 km, 7.8 × 105 model columns) versus the previous single‐node capability of GEOS‐Chem‐TOMAS (tens of cores, 200 km × 250 km, 1.3 × 104 model columns). GCHP‐TOMAS runtimes have near‐ideal scalability with computing‐core number. Simulated global‐mean number concentrations increase (dominated by free‐tropospheric over‐ocean sub‐10‐nm‐diameter particles) toward finer GCHP‐TOMAS horizontal resolution. Increasing the horizontal resolution from 200 km × 200–50 km × 50 km increases the global monthly mean free‐tropospheric total particle number by 18.5%, and over‐ocean sub‐10‐nm‐diameter particles by 39.8% at 4‐km altitude. With a cascade of contributing factors, free‐tropospheric particle‐precursor concentrations increase (32.6% at 4‐km altitude) with resolution, promoting new‐particle formation and growth that outweigh coagulation changes. These nonlinear effects have the potential to revise current understanding of processes controlling global aerosol number and aerosol impacts on Earth's climate and air quality.
12 September 2025 in ACS ES&T Air
Wildfires can inject smoke at high altitudes into the atmosphere. The resulting free tropospheric aerosols may affect inference of ground-level fine particulate matter (PM2.5) from satellite aerosol optical depth (AOD), yet the effects of accounting for plume height in this inference are poorly understood. Here, we include in the GEOS-Chem chemical transport model a fire plume height parametrization (GFAS, Global Fire Assimilation System) to examine its effect on PM2.5 inferred from satellite AOD during wildfires over the United States and Canada. Comparison with six years satellite observations of plume height reveals a low bias of a factor 1.7 in the GFAS plume height over evergreen needleleaf forests. We scale the GFAS plume height over evergreen needleleaf forests in GEOS-Chem to better represent the satellite observations, focusing on 2018 and 2020 when large wildfires yield prominent signals. Replacing the default ground-level wildfire emissions in GEOS-Chem with the scaled GFAS vertically distributed emissions reduces the bias between measured PM2.5 and PM2.5 inferred from satellite AOD, and significantly improves the consistency of simulated AOD with sun photometer measurements. Overall, this study signifies the importance of vertically distributing wildfire emissions for the inference of PM2.5 from satellite AOD.