The topology of the low-voltage distribution network is of great significance for line loss analysis, electric larceny warning, trouble shooting, and demand response. In view of the fact that the current low-voltage distribution network topological relationship is difficult to identify and update in real time, this paper proposes a low-voltage station topology identification method based on weighted least squares method. Firstly, collecting the active current value of the low-voltage extended acquisition unit and the smart meter of the multi-period, and then establish matrix equation according to the current value, which is used to solve the topological relationship by the least square method. Then apply a larger weight to the data with shorter time to achieve the purpose of discovering the changed topological relationship earlier. This paper also proposes the topological change discovery rate index and the allowable error rate index, and analyzes the proposed model based on these indicators in the simulation of the example.
The identification of topology change is the key foundation to support the operation of low voltage distribution network. For this reason, this paper proposes an identification method of topology change based on the analysis of electrical characteristics. Firstly, the current data of each meter between adjacent sliding window is used to fit the original topology, and the current deviation is calculated to determine the original topology changes or not. Considering less changes of topology can not cause obvious current deviation, a K-means clustering algorithm based on voltage correlation is used to figure out whether the topology changes or not by comparing the voltage clustering results between adjacent sliding window. The simulation results show that the proposed method can effectively identify the topology change.
The high level penetration of distributed generation in power distribution systems has not only improved the power quality but also generated other challenges. The challenges are related to the interconnection of different power generation units and the need to keep the power delivered to the end user at the standards levels. Different controllers are implemented to simplify interconnection of a distributed generation with conventional power grids. The control process is mainly about keeping the voltage amplitudes and angles of the distributed generation unit and the power distribution network in a loop to detect the right instant to operate. In the present paper, a deep analysis of the effect of voltage synchronization in the transients behavior of a distribution network with a connected photovoltaic power generation system is conducted. The currents delivered by the two power sources are evaluated at different voltage angles between the two sources during the interconnection. The influence of voltage synchronization is also examined for transients overvoltages from capacitor bank operation. The workflow in this paper provides an insight to the phenomena and useful details to consider when designing a controller for interconnection of a photovoltaic power generation to a conventional power distribution network.