Oleksandr Kalinin

Oleksandr Kalinin

Auto-generated profile, based on publicly available information

Oleksandr Kalinin

Institute of Mechanics and Automatics of Agroindustrial Production of the National academy of Agrarian Sciences of Ukraine

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2019 in Mehanization and electrification of agricultural
Verified
Journal Article
Closed access
MVM. Vаsylenko
M. Vаsylenko
DBD. Buslаiev
D. Buslаiev
OKO. Kаlinin
O. Kаlinin
YKYu. Kononogov
Yu. Kononogov
Purpose. Justification of rational parameters of hardening of the working bodies of tillage machines by the method of electro arc processing. Methods. The experimental, mathematical and statistical, monographic. Results. The technology of local hardfacing, which improves the wear resistance of the surfaces of the parts of modification with the use of electro arc processing and with additional point hardfacing with the use of variations in processing modes, various technological methods and materials for adaptation to specific operating conditions. Conclusions 1.According to the results of theoretical studies, the heat balance of the process of electrical contact processing was determined, which allows to determine the most significant factors affecting the energy performance of the process, namely, the controlled voltage U of the arc process of electrical contact processing. 2.According to the results of experimental studies, rational values of the controlled voltage U in the process of electro arc processing within 35–55 V were established, which ensures surface roughness in the range from 0.4 to 1.0 mm. Keywords: electro arc processing, hardfacing, heat balance, parts of tillage machines, regimes, roughness, wear resistance.

1 January 2023 in Mechanics and automatics of agroindustrial production
Verified
Journal Article
Closed access
IUInstitute of Mechanics and Automatics of Agroindustrial Production of the National Academy of Agrarian Sciences of Ukraine
Institute of Mechanics and Automatics of Agroindustrial Production of the National Academy of Agrarian Sciences of Ukraine
MVM. O. Vаsylenko
M. O. Vаsylenko
DBD. O. Buslаiev
D. O. Buslаiev
OKO. Ye. Kаlinin
O. Ye. Kаlinin
YKYu. A. Kononogov
Yu. A. Kononogov
Purpose. Substantiated methods of restoration and modes of hardening of parts of seed drills by using wear-resistant repair elements and arc surfacing. Methods. Graphic, micrometer, accelerated testing of metal surfaces for abrasive wear. Results. Methods of restoration and modes of hardening of parts of seed drills by using wear- resistant repair elements and arc surfacing are substantiated. The developed process of restoration and hardening of parts of seed drills is implemented in the conditions of “UPI-AGRO” LLC and “Food company “Zorya Podillia” LLC, Vinnytsia region. Conclusions 1. The zones, sizes and nature of wear of parts of seed drills are determined. As a result of the analysis of the values of wear of parts of seed drills, it was established that: - the amount of linear wear of parts of the Kverneland Optima HD seed drill after their cultivation of 6 ha varies from 4 to 12 mm; - the amount of linear wear of parts of the Kuhn Planter seed drill after cultivating 43 ha varies from 4.2 to 40.7 mm. 2. The methods of restoring of parts of seed drills are substantiated: - parts of seed drills with wear of more than 6 mm should be restored by arc welding of wear- resistant materials using repair elements; - parts of seed drills with wear from 4 to 6 mm should be restored by arc welding of wear-resistant materials to the size of new parts without the use of repair elements. 3. Based on the results of experimental studies of the modes of application of wear-resistant materials, it was established that during arc welding with wear-resistant materials, the wear resistance of the coating decreases with an increase in the current intensity. The rational surfacing regime within the range of current values I from 160 to 280 A are current intensity I = 160 A at voltage U = 28 V. 4. The wear resistance of steels 30MnB5, Hardox 500, Hardox 600, which are used for production parts of seed drills, was studied. It was established that surfacing with wear-resistant materials, including ПП-180X9 wires, of the blade surfaces of the working bodies of parts of seed drills made of these steels increases their relative wear resistance by 7–13 times. Therefore, such additional hardening with wear-resistant electrodes and wires of parts of seed drills made of these steels is expedient. Keywords: restoring, defects, hardening, wear resistance, modes, parts of seed drills.

1 January 2021 in Mehanization and electrification of agricultural
Verified
Journal Article
Closed access
MVM. O. Vаsylenko
M. O. Vаsylenko
VLV. G. Lysanyuk
V. G. Lysanyuk
DBD. O. Buslаiev
D. O. Buslаiev
OKO. Ye. Kаlinin
O. Ye. Kаlinin
YKYu. A. Kononogov
Yu. A. Kononogov
MSM. V. Strembovskyi
M. V. Strembovskyi
Annotation Purpose. Increasing the durability of the parts of tillage machines due to the use of replaceable wear-resistant elements in their design. Methods. Abstract-logical, monographic, computational-constructive, graphic, micrometer, mathematical and physical modeling, experiment planning, mathematical statistics and regression analysis of experimental data, comparative and field tests of locally hardened experimental parts of tillage machines using the main provisions of the theory of friction and wear in abrasive environment. Results. A process of hardening with replaceable wear-resistant elements of ЧГ-40 subsoiler bits and a group process of hardening with replaceable wear-resistant elements of cutting knives (left and right) ЧГ-40 subsoiler points has been developed. Conclusions 1. A list of materials has been determined that are recommended for the manufacture of wear-resistant replaceable elements of the parts of soil cultivation machines, in particular, based on the results of accelerated comparative tests for the abrasive wear resistance of samples of different materials for replaceable elements, tungsten plates ВК-13 are recommended. 2. The processes of hardening with replaceable wear-resistant elements of chisels and cutting knives of the ЧГ-40 subsoiler points have been developed, which are based on hardening by the soldering method of tungsten plates ВК-13. 3. Based on the results of the production check of technological processes in the conditions at the Agricultural Limited Liability Company “Agrofirma “Krasne”, it was established that the operating time of the experimental working bodies of tillage machines exceeds the operating time of the serial chisel-subsoiler ЧГ-40 paws by more than 3 times. Keywords: durability, replaceable elements, hardening, wear resistance, soldering, parts, processes.

1 January 2024 in Mechanics and automatics of agroindustrial production
Verified
Journal Article
Closed access
IUINSTITUTE of MECHANICS and AUTOMATICS of AGROINDUSTRIAL PRODUCTION of the NATIONAL ACADEMY of AGRARIAN SCIENCES of UKRAINE
INSTITUTE of MECHANICS and AUTOMATICS of AGROINDUSTRIAL PRODUCTION of the NATIONAL ACADEMY of AGRARIAN SCIENCES of UKRAINE
MVM. O. Vаsylenko
M. O. Vаsylenko
DBD. O. Buslаiev
D. O. Buslаiev
OKO. Ye. Kаlinin
O. Ye. Kаlinin
YKYu. A. Kononogov
Yu. A. Kononogov
Purpose. Substantiated method of restoring and hardening of subsoiler bits by micrometric studies and comparative tests. Methods. Analytical, monographic, graphic, design and calculation, micrometric. Results. A method of restoring and hardening the forward part of subsoiler bits has been developed, according to which: - worn out deep ripper subsoiler bits are cut by plasma cutting; - in the same way, repair elements of subsoiler bits are cut, which on the original equipment 01.10.016А (pat. of Ukraine for invention No. 97298) are simultaneously sharpened and hardened by the method (pat. of Ukraine for invention No. 97874) of electroarc; - sharpened repair elements are welded to the cut subsoiler bits on the developed device; - the working surface and ends (side surfaces) of the forward part of the welded subsoiler bits are additionally hardened by continuous electroarc welding with wear-resistant materials with a current strength of 150–180 A and after technical control are painted. Conclusions 1. According to the results of comparative experimental and production tests, it was established that the linear wear intensity of the central part of the original subsoiler bits is on average 4.40 mm/ha, and of the side parts – 5.06 mm/ha, which is 15 % more. 2. It was established that the linear wear intensity of the central part of the restored subsoiler bits is on average 3.62 mm/ha, and of the side parts – 3.98 mm/ha, which is 9.9 % more. 26 3. As a result of comparing the nature of the wear of the subsoiler bits according to their width coordinates, it was established that the ratio of the linear wear intensity of the side parts to the central part of the restored subsoiler bits is on average 5.1 % less than in the original parts. 4. According to the results of experimental and production tests, the dependences of the linear wear intensity of the Dante Macchine subsoiler bits on the coordinates of their width were obtained and it was established that the bits restored and hardened with wear-resistant materials have a lower linear wear intensity by 21.1–28.2 % than the original bits. 5. According to the results of the research, an application for a patent of Ukraine for invention No. a202204329 “Method of restoring and hardening the forward part of subsoiler bit” was filed. Keywords: restoring, hardening, wear resistance, subsoiler bits.

1 January 2022 in Mehanization and electrification of agricultural
Verified
Journal Article
Closed access
VOVаsylenko M. O.
Vаsylenko M. O.
BOBuslаiev D. O.
Buslаiev D. O.
KYKаlinin O. Ye.
Kаlinin O. Ye.
KAKononogov Yu. A.
Kononogov Yu. A.

1 January 2020 in Mehanization and electrification of agricultural
Verified
Journal Article
Closed access
MVM. O. Vаsylenko
M. O. Vаsylenko
OKO. Ye. Kаlinin
O. Ye. Kаlinin
Annotation Purpose. Establishment of the relationship between the deformation of the blade parts of tillage and design parameters after electro arc. Methods. Planning an experiment, mathematical statistics and analytical processing of experimental data. Results. The dependences of the deformation of the blade parts of tillage equipment on the design parameters after their recovery and hardening by electro arc are established. Conclusions 1. It has been established that the magnitude of the deformation Δ, mm of the part of tillage, is inversely depends on the thickness δ after hardening. 2. It has been established that the magnitude of the deformation Δ, mm of the part of tillage, is inversely dependent on the width B after hardening. 3. The rational modes of electro arc were established when hardening parts of tillage with a thickness of 4–10 mm, a width of 20 mm to 60 mm and a length of 230 mm to 500 mm, namely, a current of 350–400 A, a voltage of 50–55 V and a temperature cooling medium in the bath of the installation for simultaneous electro arc sharpening and hardening – 20–60 °С. Such rational modes of electro arc ensure the absence of deformation of parts of tillage less than 5 mm, which is permissible according to the requirements of regulatory, technical and design documentation. Keywords: deformation, length, operation, electro arc, hardening, parts of tillage, thickness, width.