Considering CO2 as a feedstock becomes nowadays more and more of interest. The reutilization of CO2 is already possible via cold plasma techniques operating at atmospheric pressure. One of the promising technologies is the dielectric barrier discharge (DBDs). In most cases they exhibit a low energy efficiency for CO2 conversion. However, several routes can be used to increase this efficiency and hence, the product formation. One of them is the packed-bed DBD configuration with porous beads inside the gap of the DBD, which also allows coupling plasma with catalysis. Catalysts can be introduced in such configuration to exploit the synergistic effect between plasma and catalytically active surfaces, leading to a more efficient process. In this article, the dry reforming of methane (DRM) is studied, which aims to convert both CO2 and CH4, another greenhouse gas, at the same time. The conversions and energy efficiency of the DRM process are investigated and compared in both the packed-bed DBD configurations containing catalysts (Co, Cu or Ni) and the classical DBD. The change in filamentary behavior is studied in detail and correlated with the obtained conversions via gas chromatography, mass spectrometry and using an oscilloscope. A characterization of the catalysts on the beads is also carried out. Both the CO2 and CH4 conversions are clearly increased with the plasma-catalysis. CH4 conversions as high as 90% can be obtained in certain conditions with copper catalysts.