20 April 2001 in Journal of Hazardous Materials
6 February 2016 in Desalination and Water Treatment
Adsorption of cadmium (Cd2+) and lead (Pb2+) was investigated using activated carbon (AC) produced from municipal organic solid waste (MOSW). The produced AC was characterized using Scanning Electron Microscopy, X-ray Diffraction, Fourier Transform Infrared spectroscopy, and Brunauer–Emmett–Teller. The results showed that an AC with a surface area of 790 m2/g was produced at carbonization temperature and time of 700°C and 2 h, respectively, and activation with phosphoric acid concentration of 30%. The effect of operational factors, namely, pH 3–7, contact time (0–480 min), metal concentration (25–300 mg/L), and adsorbent dosage (25–300 mg per 50 mL of metal solution) on the adsorption process was investigated. The results showed that optimum adsorption of Cd2+ and Pb2+ were obtained at pH of 5, contact time of 180 min, metal concentration of 100 mg/L, and adsorbent dose of 200 mg per 50 mL of metal solution. At optimum operational conditions, removal efficiencies of 78 and 94% for Cd2+ and Pb2+, respectively, were achieved. The isotherms also showed that the maximum adsorption capacity of Cd2+ and Pb2+ were 61 and 90 mg/g, respectively, at equilibrium time of 120 min and pH value of 5.
1 April 2018 in Journal of Environmental Chemical Engineering
10 September 2020 in Environmental Science and Pollution Research
1 August 2020 in Journal of Materials in Civil Engineering
In this research, an attempt was made to explore the possibility of using a stabilization and solidification ( ) technique for the treatment of sandy soil contaminated with diesel and crude oil using different stabilizers. For this purpose, soil samples were collected and contaminated by diesel and crude oil at three different percentages (2.5%, 5%, and 10% by weight of dry soil). Effects of oil contamination of soil were evaluated, and then treatment was carried out using ordinary portland cement (OPC), cement kiln dust (CKD), and limestone powder (LSP). The performance of -treated soils was evaluated by measuring the changes in compaction characteristics, unconfined compressive strength (UCS), permeability, and heavy metal and hydrocarbon contents. Toxicity characteristic leaching procedure (TCLP) and total petroleum hydrocarbons (TPH) tests on -treated soil were conducted to observe the effect of the treatment on the reduction of the soil pollution potential. Scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD) analyses were carried out to examine the changes in the microstructure and mineralogy of the soil after its treatment. Results of this investigation indicate that the treatment of the oil-contaminated soil improved the compaction characteristics, UCS, and resistance against permeability and leachability.
1 October 2001 in Water Research