2 August 2017 in Journal of Physics D: Applied Physics
The inception of leader discharges in long air gaps at atmospheric pressure is simulated with a thermo-hydrodynamic model and a detailed kinetic scheme for N 2 /O 2 /H 2 O mixtures. In order to investigate the effect of humidity, the kinetic scheme includes the most important reactions with the H 2 O molecule and its derivatives, resulting in a scheme with 45 species and 192 chemical reactions. The heating of a thin plasma channel in front of an anode electrode during the streamer to leader transition is evaluated with a detailed 1D radial model. The analysis includes the simulation of the corresponding streamer bursts, dark periods and aborted leaders that may occur prior to the inception of a propagating leader discharge. The simulations are performed using the time-varying discharge current in two laboratory discharge events of positive polarity reported in the literature as input. Excellent agreement between the simulated and the experimental time variation of the thermal radius for a 1 m rod-plate air gap discharge event reported in the literature has been found. The role of different energy transfer and loss mechanisms prior to the inception of a stable leader is also discussed. It is found that although a small percentage of water molecules can accelerate the vibrational-translational relaxation to some extent, this effect leads to a negligible temperature increase during the streamer-to-leader transition. It is also found that the gas temperature should significantly exceed 2000 K for the transition to lead to the inception of a propagating leader. Otherwise, the strong convection loss produced by the gas expansion during the transition causes a drop in the translational temperature below 2000 K, aborting the incepted leader. Furthermore, it is shown that the assumptions used by the widely-used model of Gallimberti do not hold when evaluating the streamer-to-leader transition.
1 July 2019 in Plasma Sources Science and Technology
Electrical discharges in long air gaps, referred to as ‘leader discharges’, usually propagate with transient thermal plasma channels. The gas temperature evolution of the channels plays a key role in the inception and development of leader discharges. This paper is aimed at investigating the use of quantitative Schlieren techniques in temperature measurement of the leader discharge channels. To do this, a calibrated Toepler’s lens-type Schlieren system was set up to measure the radial temperature profile of leader discharge channels. The measurements were compared with the simulation results from a detailed numerical model which describes the thermal-hydrodynamic properties of the channel. The comparison shows that although a good agreement is obtained when the leader is propagating in a stable manner, the measurements of the temperature evolution at the axis of leader channel deviate significantly from the numerical simulation during the leader initiation stage. Apart from the limited spatial and temporal resolution of the Schlieren system, the deviation is also caused by the non-isobaric gas heating during leader inception. Based on the theoretical analysis and numerical simulation, we proposed several suggestions to the application of quantitative Schlieren techniques to measure the temperature of leader channels.
10 February 2017 in Journal of Physics D: Applied Physics
A computationally efficient model to evaluate stable glow corona discharges and their transition into streamers is proposed. The simplified physical model referred to as the SPM is based on the classic hydrodynamic model of charge particles and a quasi-steady state approximation for electrons. The solution follows a two-step segregated procedure, which solves sequentially the stationary continuity equation for electrons and then time-dependent continuity equations for ions. The validity of using the SPM to simulate glow corona discharges and their transition into streamers is demonstrated by performing comparisons with a fully coupled physical model (FPM) and with experimental data available in the literature for air under atmospheric conditions. It is shown that the SPM can obtain estimates similar to those calculated with the FPM and those measured in experiments but using significantly less computation time. Since the proposed model simulates efficiently the ionization layer without prior knowledge of the surface electric field or the discharge current, it is a computationally efficient alternative to calculations of glow corona discharges based on Kaptzov’s approximation (KAM). The model can also be employed to efficiently calculate the conditions for the transition of glow corona into streamers, overcoming the limitations of KAM to provide such estimates.
4 May 2016 in Journal of Physics D: Applied Physics
A 2D numerical simulation of the transition from stable positive glow corona to streamers in coaxial cylindrical configuration is presented. The hydrodynamic model with several convection-dominated continuity equations together with Poisson equation are solved with consideration of the ionization layer. The transition from a stable positive glow corona produced under a DC voltage to streamers is investigated under a sudden change of the applied voltage. The critical rate of rise of voltage required for the transition from positive glow to streamer corona is evaluated with a voltage ramp. By introducing either physical or numerical instabilities into the model, streamers with filamentary structures are observed, which produce a sudden increase of the discharge current by more than two orders of magnitude. It is also found that the surface electric field of the corona-generating conductor deviates from the onset electric field, casting doubts about the validity of Kaptzov’s approximation to evaluate the transition from stable glow to streamers.
18 March 2020 in Journal of Physics D: Applied Physics
Leader discharge plays a key role in the breakdown of long air gap and the evolution of natural lightning discharges. Prior to the formation of continuous leaders, streamer corona bursts with dark periods in between generally appear. To attain a better physical understanding of the dynamics of discharge during dark periods, experimental studies with a specially designed electrode based on an improved quantitative schlieren system were performed. The experiments measured gas density and temperature changes of the leader discharge channel within the dark period for the first time. Temperature changes in a single discharge channel and corresponding current were obtained simultaneously. Measurements show that at the axis of the streamer stem and the unstable leader within the dark period the gas temperature is below 2000 K and decreases monotonically with time. These measurements confirmed the prediction of a previous theoretical study. To analyse the properties of discharge during the dark period, the measurements were compared with simulation results based on a detailed 1D thermo-hydrodynamic model. The measured temperature drop was less significant than that computed from simulation. This discrepancy is believed to be caused by heating from the ionic current, which was neglected in the previous studies. The ionic current helps to maintain the gas temperature during the long dark period but cannot reverse its decline. From a comparison and analysis, several suggestions are proposed to improve both the measurement system and the numerical model for further quantitative investigations of the dynamics of leader initiation.
3 January 2018 in Journal of Physics D: Applied Physics
The amount of the electric charge injected by the streamer corona bursts during the stage of leader inception determines the energy deposited to thermalize the corona stem into a leader segment. This paper is aimed at investigating the critical charge required for positive leader inception in air by using a thermo-hydrodynamic model with a detailed kinetic scheme. In order to simplify the analysis and to speed up the simulation, a reduced kinetic scheme for air is proposed. Numerical comparisons show that the reduced scheme can obtain almost the same results as the previous comprehensive kinetic scheme but with only half of the number of species and reactions. The thermo-hydrodynamic model with the reduced kinetics is then used to solve the radial dynamics of a single stem heated by current pulses typical of streamer corona bursts. The critical charge necessary for the direct transition of a first streamer corona into a leader under electrodes with large curvature radius is estimated between 0.08 and 0.5 µ C per stem. Furthermore, the simulation shows that the gas heating of corona stem formed from electrodes with small curvature radius is mainly determined by the total accumulated charge injected by previous streamer corona bursts and the length of the dark periods in between the current pulses. The shape and the number of the corona current pulses in the discharge also play a role and their effects are discussed. It is suggested that the transition into a leader is triggered when a secondary streamer burst is initiated after the gas temperature is increased by the heating of previous streamers to about 1200 K. In addition, it is found that the heating produced by the charge injected by previous streamer corona bursts can be neglected if the dark period to the next burst is larger than few hundreds of µ s for a corona stem with moderate initial stem radius. This indicates that the critical charge criterion obtained from laboratory experiments does not hold to evaluate the inception of positive leaders under conditions when long dark periods are present.