16 November 2018 in MATEC Web of Conferences
The paper proposes an approach to determining the increase of the normative lifetime of building structures on the basis of the algorithm of numerical calculation of the residual life of structures, which is performed on the basis of the results of defining parameters obtained during the technical examination and evaluation of defects, failures and structural damage. To calculate the structures, the simulation of the stressstrain state of the building structures with the involvement of OK LIRA was used. Simulation allowed performing optimization of technical solutions and strengthening of structures for buildings. The methodology is used to design elements for strengthening the structures of buildings and structures. Reliable estimation and forecasting of the technical condition enables to prevent the occurrence of accidents of structures and their associated losses, to use rational use of funds for current and capital repairs, and to regulate the technical condition in such a way as to achieve the most effective use of fixed assets.
1 December 2019 in IOP Conference Series: Materials Science and Engineering
In the article a technique of studying technical condition for steel structures that were damaged by high temperature impact, as well as a climatic effects on building structures due to the difference in ambient temperatures is described. Based on obtained data, there was made a conclusion about technical condition of the structures and possibility or inability to restore their serviceability by repair, reinforcement or replacement. There were conducted a comparative analysis of the results of experimental studies and numerical analysis. The mathematical model makes possible operative prediction for the controlled parameters values of building structures. In the article, examples about practical application of the techniques are described that allow doing technical examination of objects, damaged by temperature influence. The aim of this study is to substantiate the need to make calculations about temperature impacts for buildings with a steel frames and to develop measures to ensure the serviceability of steel structures of buildings and structures in conditions of temperature impact.
13 March 2018 in Eastern-European Journal of Enterprise Technologies
Development of the method of frequencytemporal representation of fluctuations of gaseous medium parameters at fire
28 February 2018 in Eastern-European Journal of Enterprise Technologies
Studies aimed at optimizing the design of micromodules based on ITO/CdS/CdTe/Cu/Au photoelectric converters, which are used in autonomous power plants for field camps, have been carried out. To use photoelectric converters as power sources, they are combined into micromodules and modules. The nature of commutation of single solar cells in the microassembly significantly affects the output characteristics of the micromodule and, consequently, the efficiency of the photoelectric converter as a whole.It is found that the series connection of the ITO/CdS/CdTe/Cu/Au PEC in the micromodule ensures its stability even if the output parameters of one or more single solar cells fail or deteriorate. If the composition of the micromodule includes a solar cell with significantly worse output characteristics, or there are several such elements, then when they are connected in series, the efficiency of the micromodule is several times higher than for a parallel cell. With the series connection of the ITO/CdS/CdTe/Cu/Au PEC in the micromodule composition, experimental samples of the micromodule with an efficiency of 5.3 % are obtained, which is almost 2 times higher than for parallel connection of the same PEC
31 July 2018 in Eastern-European Journal of Enterprise Technologies
Results of studying the Cu/ITO transparent back contacts for solar cells SnO2:F/CdS/CdTe/Cu/ITO
7 November 2017 in Eastern-European Journal of Enterprise Technologies
Geometrical modeling of the inertial unfolding of a multi-link pendulum in weightlessness