Companies have to face constantly changing framework conditions. Product lifecycles are reduced and the number of variants increase as a result of increasing product individualization. To ensure that production systems such as robots can achieve this flexibility, more and more programming procedures are being developed that do not require a high level of qualification. This thesis deals with an intuitive approach that can be used for programming adhesive joints. With the help of the simple pointing to surfaces, a path corresponding to the intersection line of the two planes is calculated. The required algorithm for fingertip recognition is implemented with the help of Voronoi diagrams. The recognition of the planes is based on a region growing algorithm. The accuracy of the whole process is limited by the current technical state of the art and does not yet meet the necessary requirements.
In this paper the sensorless control of a permanent magnet synchronous machine which is meant to be used in pump applications is discussed. The sensorless control in the middle and high speed region can be considered as state of the art. In contrast to that, sensorless control in the low speed region for use in industrial applications still is an issue. Therefore, this paper focuses on saliency based sensorless control employing high frequency signal injection which usually is applied for low speed applications. However, it is shown that the used machine does not provide the required properties for such kind of sensorless control. Therefore, a new strategy is presented which compensates for the insufficient properties regarding position estimation in order to allow a saliency based approach anyway.
In this paper the power consumption model of a circulating wet runner pump is presented. Such a model provides several advantages since it can be used for example to detect issues during operation of the pump. For instance, dry running which might damage the bearings of the pump can be detected based on deviations between the measured power and the power predicted by the model. Furthermore, based on the power model the volume flow which passes the pump can be determined without a volume flow sensor and thus save costs. As the overall power consumption of the pump is influenced by different components such as electrical and friction losses, models of the individual components which have an influence on the power consumption are presented. Then, the components are combined to one overall power consumption model and the model parameters are identified by measurements. Finally, the model is validated by comparison of the dynamic behaviour of the model with the actual measured power consumption.