This paper presents reverse mapping based space vector pulse width modulation (SVPWM) strategy for five level and seven level diode clamped multilevel inverters. In this method, the space vector is expressed as a sum of contender vector and an error vector. Here, the actual sector which contains the tip of the reference space vector need not be found. The vector nearest to the reference space vector is the contender vector. By calculating vector difference of a contender vector from the reference vector, an error vector is determined. Using translation method an error vector is translated to the origin of space vector diagram. There will be (n-1) steps in space vector diagram for an n-level inverter. As the error vector amplitude will be less than one step of the space vector diagram, the 2-level space vector method can be applied. To obtain a vector which is very close to the reference vector, the switching states determined can be added to the contender vector. This technique can be extended to any n-level multilevel inverter. The performance of five level and seven level diode clamped multilevel inverters are presented using MATLAB/ Simulink. The performance of inverters is evaluated using induction motor load. The experimental results using FPGA are presented for seven level diode clamped multilevel inverter.
The corrosion inhibition efficacy of Codiaeum variegatum leaf extract (CVLE) on mild steel in 1 N HCl was assessed utilizing weight-loss (WL), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS) methods at different temperatures 298 K, 308 K, 318 K, 328 K and 338 K. The study revealed that CVLE is an environmentally friendly and sustainable corrosion inhibitor, attaining an impressive inhibition efficacy of 91.83 ± 0.04% at 1000 ppm concentration at 298 K. A significant reduction in corrosion rate (CR) from 21.264 ± 0.02 to 1.735 ± 0.05 mmpy and corrosion current density (icorr) from 157.63 ± 0.01 to 4.02 ± 0.02 μA cm−2 was observed with increasing CVLE concentration, highlighting its protective efficacy. The adsorption of CVLE followed the Langmuir adsorption isotherm on the mild steel surface, indicating monolayer adsorption behavior. Potentiodynamic polarization studies classified CVLE as a mixed-type inhibitor, influencing both cathodic and anodic reactions. The mechanism of inhibition occurring on mild steel was discovered using the XPS method. Scanning electron microscopy (SEM) confirmed the creation of a layer of protection by CVLE on the mild steel surface, corroborating its inhibitory action. EIS analysis further demonstrated that the inhibiting efficacy was elevated with higher concentrations of CVLE, consistent with a rise in adsorption equilibrium constant (Kads), indicating stronger inhibitor–metal interactions. Theoretical studies supported these findings by showing a low energy gap (ΔE), signifying strong adsorption and excellent anti-corrosion potential of CVLE at the molecular level. This inclusive study establishes CVLE as an effective and eco-friendly inhibitor for mild steel corrosion in acidic environments.
16 June 2023 in Environmental Science and Pollution Research
The synthesis and characterization of Imidazolium cation-based ionic liquids having different anions were reported in the present article. The physicochemical and spectral analyses were used to characterized these ionic liquids. The theoretical studies using the B3LYP method provide optimized structure, HOMO–LUMO plots, thermodynamic parameters, and quantum descriptors. The anti-corrosive property of Imidazolium cation-based ionic liquids was observed in 0.5 M H2SO4 corrosive medium at 303, 313, 323, and 333 K temperatures by various strategies like gravimetric studies, electrochemical impedance spectroscopy, potentiodynamic polarization studies, and scanning electron microscopy (SEM). The interesting feature of this article is that both ionic liquids follow different adsorption isotherms. IL-1 ionic liquid shows physisorption adsorption behavior, and IL-2 exhibits mixed adsorption (chemisorptions and physiorption). The electrochemical strategies and Egap value obtained from DFT reveal the maximum inhibition efficiency of IL-2 for the corrosion process in an acidic medium on mild steel. Potentiodynamic polarization studies reveal the mixed type behavior for ionic liquid inhibitors. EIS results indicate that the inhibition efficiency improved by enhancing ionic liquids concentration. The protective layer formation or adsorption of ionic liquid on metallic surface was confirmed by SEM. In the present article, the proposed mechanism shows the blockage of anodic and cathodic sites by ionic liquids to inhibit the corrosion process on mild steel in an acidic medium. Graphical abstract
The extracts of different parts of plants (leaf, stem, and flower) act as a green, environmentally friendly, economical, and safe corrosion inhibitors. The eco-friendly extracts of plant material provide an excellent alternative that substitutes toxic traditional (organic and inorganic) corrosion inhibitors. The plant extracts are renewable and readily available; thus, they occupy a unique position in the family of green inhibitors. The plant extract contains several bioactive compounds, such as flavonoids, tannins, polyphenols, phenolic acids, glycosides, flavonols, etc., which possess experienced significant interest as anti-corrosive agents. These plant extracts contain several heteroatoms like phosphorus, nitrogen, sulfur, oxygen, etc., which are adsorbed on the metallic surface and form an inert protective layer that protects metal from a corrosive environment. Thus, this article aims to shed light on the efficiency of plant extract in protecting steel in an acidic environment.
Plant extracts represent abundant sources of biomolecules distributed throughout various plant parts. These biomolecules are extracted using diverse solvents and methods. Within these plant extracts lie bioactive compounds, known for their antioxidant properties and anticorrosive capabilities. Detecting and isolating these active biomolecules from plant extracts necessitates analytical techniques such as gas chromatography-mass spectrometry and liquid chromatography-mass spectrometry. The active biomolecules within plant extracts contain heteroatoms within their structures, facilitating their adsorption on steel surfaces and conferring corrosion inhibition properties. The advantages of plant extracts as green corrosion inhibitors include ready availability, ease of application, eco-friendly characteristics, and cost-effectiveness. These extracts adhere to steel surfaces, blocking their active sites and effectively reducing the corrosion rate. This review consolidates the findings on the corrosion inhibition potential of plant extracts from various plant parts, elucidating their performance in different concentrations of sulfuric acid.