The finite-difference time-domain (FDTD) method based on nonuniform face-centered cubic (FCC) grids, termed as NU-FCC-FDTD method, is proposed in this article. The FCC-FDTD method with uniform grids has a smaller numerical dispersion error than the traditional FDTD methods. To further enhance its efficiency and scalability, the NU-FCC-FDTD method is proposed to solve complex electromagnetic problems. Unlike the traditional FDTD methods based on Yee’s grids, for which the nonuniform grid technique is relatively straightforward, instability may occur when trying to apply nonuniform grids into the FCC-FDTD method. To ensure stability, cell-size-based correction factors are carefully defined in the time-marching formulations after taking cell sizes into consideration. Through comprehensive numerical dispersion analysis, the NU-FCC-FDTD method shows numerical dispersion advantage over the FDTD methods and the FCC-FDTD method with uniform grids. Furthermore, the stability condition is also given by using the parameter scanning method and verified in numerical examples. Four examples, including electromagnetic wave propagation, a dielectric rod (DR) resonator, a composite metallic-dielectric radome and the electromagnetic energy absorption of human head, are carried out to demonstrate its performance. Results show that the proposed NU-FCC-FDTD method can significantly improve efficiency compared with that of the FCC-FDTD method without compromising accuracy.
9 June 2022 in IEEE Antennas and Wireless Propagation Letters
Based on the auxiliary differential equation (ADE), a performance-enhanced convolution perfectly matched layer (CPML) for the face-centered cubic finite-difference time-domain (FCC-FDTD) method is developed in this letter. Unlike the traditional FDTD methods on Yee’s grids, for which the CPML technique is relatively straightforward to be implemented, poor performance, and even instability may occur in the FCC-FDTD method. To avoid these problems, the ADE technique is incorporated into the derivation, and the impact of node locations on absorbing boundary constitutive parameters is carefully considered. In addition, the derivation of the time-marching formulations is substantially simplified. The optimal ranges of constitutive parameters are found through a numerical sweep. Two numerical examples, the electromagnetic pulse propagation and absorbed power density of a brain model during mobile communication, are examined to validate the performance. The results suggest that the proposed ADE-CPML for the FCC-FDTD method shows good stability and accuracy.
13 November 2025 in IEEE Transactions on Electromagnetic Compatibility
In unmanned aerial vehicle (UAV) systems, the shielding effectiveness (SE) of composite material components with slot structures is analyzed and optimized under thermal and fluid constraints via reinforcement learning in this article. To improve the SE of UAV systems when satisfying the balance requirements of the electromagnetic-thermal-fluid (ETF) multiphysics coupling, the twin delayed deep deterministic policy gradient (TD3) algorithm for ETF with a carefully designed reward is proposed, which is termed ETF-TD3. To accelerate the multiphysics optimization process, an ETF predictive convolutional neural network (ETF-PCNN) is proposed to predict multiphysics results and integrated into the ETF-TD3 algorithm. Three typical composite material components in UAV systems, including UAV airframe and electric equipment boxes, are used to apply the proposed ETF-TD3 algorithm with the ETF-PCNN method. Optimization results and computational cost demonstrate the benefits and advantages of the ETF-TD3 algorithm in the multiphysics design of slotted composite material components. When compared with some commonly used optimization algorithms, the optimal design obtained by the ETF-TD3 algorithm achieves better SE while the thermal management and aerodynamic characteristics are satisfied. In addition, the proposed algorithm provides design guidelines while revealing the underlying physical principles.
1 April 2025 in IEEE Transactions on Antennas and Propagation
A complex-frequency-shifted perfectly matched layer (CFS-PML) for the face-centered cubic finite-difference time-domain (FCC-FDTD) method with second-order in time and fourth-order in space, termed as FCC-FDTD(2,4), is proposed in this article. To apply the FCC-FDTD(2,4) method in solving complex electromagnetic problems, the CFS-PML is proposed through an auxiliary differential equation (ADE), which enhances the absorbing performance and substantially simplifies the derivation of the time-marching formulations. Due to the fourth-order sampling approaches of FCC grids in space, the computational domain-absorbing boundary interface is carefully analyzed. Moreover, the proposed method exhibits complying-divergence. Then the optimal ranges of three absorbing boundary constitutive parameters are found through the numerical sweeping method and verified by the genetic algorithm. Three numerical examples, the electromagnetic wave propagation, electromagnetic scattering of multiple targets with fine details and the electric field distribution of a large-scale airplane, are carried out to demonstrate the performance of the proposed method. The results indicate that the developed ADE-CFS-PML absorbing boundary for the FCC-FDTD(2,4) method shows good accuracy and stability.
1 January 2026 in IEEE Transactions on Instrumentation and Measurement