5 April 2017 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
28 August 2015 in Journal of the Chinese Institute of Engineers
The investigation of fluid flow in sharp open-channel bends is key to controlling undesired sedimentation in natural river reaches. The difficulties are associated with controlling the flow separation in meanderings. Flow separation decreases the width of the flow, and consequently, the conveyance capacity while increasing erosion and mixing. This study proposes a novel approach to reduce the flow separation at the inner banks of sharp open-channel bends. Three-dimensional numerical experiments were conducted. To find the most reliable procedure, five turbulence models were examined. The employed numerical approach is formulated within the framework of the finite volume method and the volume of fluid (VOF) technique to solve the Navier–Stokes equations. Water levels and velocity profiles are obtained in different sections of the channel and are compared to experimental studies of a 90° sharp open-channel bend. A close agreement is observed using the RSM (Reynolds stress model) turbulence model. Moreover, the evaluation of acquired velocity profiles demonstrates that in a regular bend, the lowest velocity occurs near the inner bank, where it has a flow separation tendency. The same numerical procedure is employed to simulate water flow through a sharp converging open-channel bend. The measurements of velocity profiles and velocity vectors in the curved sections support the idea that decreasing the channel width considerably reduces the overall velocity variations in cross-sectional areas of the test case and is effective to control flow separation.
21 April 2023 in Applied Water Science
Accurate forecasting of runoff as an important hydrological variable is a key task for water resources planning and management. Given the importance of this variable, in the current study, a multivariate linear stochastic model (MLSM) is combined with a multilayer nonlinear machine learning model (MNMLM) to generate a hybrid model for the spatial and temporal simulation of runoff in the Quebec basin, Canada. Monthly hydrological data from 2001 to 2013, including precipitation and runoff data from nine stations and Normalized Difference Vegetation Index (NDVI) extraction of MODIS data, are applied as input to the proposed hybrid model. At the first step of the hybrid modeling, data normality and stationary were examined by performing various tests. In the second step, MLSM was developed by defining four different scenarios and as a result 15 sub-scenarios. The first and second scenarios were developed based on one exogenous variable (precipitation or NDVI). In contrast, the second and third scenarios were developed based on two additional variables. In the first and third scenarios, the data are modeled without preprocessing. In the second and fourth scenarios, a preprocessing step is performed on the data. Then, in the third step, various combinations based on different time delays from runoff data were applied for developing nonlinear model. The comparisons are made between observed and simulated time series at various stations and based on the root mean squared error (RMSE), mean absolute error (MAE), correlation coefficient (R) and Akaike information criterion (AIC). The efficiency of the proposed hybrid model is compared with a novel machine learning model that was introduced in 2021 by Sultani et al., and it was also compared with the results obtained from the linear and nonlinear models. In most stations, delays (t-1) and (t-24) are identified as the most effective delays in hybrid and nonlinear modeling of runoff. Also, in most stations, the use of climatic parameters and physiographic factors as exogenous variables along with runoff data improves the results compared to the use of one variable. Results showed that at all stations, proposed hybrid model generally leads to more accurate estimates of runoff compared with various linear and nonlinear models. More accurate estimates of peak runoff values at all stations were another excellence of proposed hybrid model than other models.
1 January 2016 in Engineering Applications of Computational Fluid Mechanics
Transitions are structures that can change geometry and flow velocity through varying the cross-sections of their channels. Under subcritical flow and steady flow conditions, it is necessary to reduce the flow velocity gradually due to increasing water pressure and adverse pressure gradients. Due to the separation of flow and subsequent eddy formation, a significant energy loss is incurred along the transition. This study presents the results of experimental investigations of the subcritical flow along the expansive transition of rectangular to trapezoidal channels. A numerical simulation was developed using a finite volume of fluid (VOF) method with a Reynolds stress turbulence model. Water surface profiles and velocity distributions of flow through the transition were measured experimentally and compared with the numerical results. A good agreement between the experimental and numerical model results showed that the Reynolds model and VOF method are capable of simulating the hydraulic flow in open channel transitions. Also, the efficiency of the transition and coefficient of energy head loss were calculated. The results show that with an increasing upstream Froude number, the efficiency of the transition and coefficient of energy head loss decrease and increase, respectively. The results also show the ability of numerical simulation to simulate the flow separation zones and secondary current along the transition for different inlet discharges.
1 October 2009 in Journal of Applied Sciences