1 February 2008 in Journal of Hazardous Materials
4 June 2020 in Geomicrobiology Journal
Biogenic manganese oxides are believed to be the most abundant and highly reactive Mn oxide phases in the environment. In this study, the production of biogenic manganese oxides by Pseudomonas putida NRRL B-14878 was performed. First, a series of experiments were gradually carried out for the adaptation of P. putida NRRL B-14878 to Mn. Secondly, optimum pH and temperature for manganese oxidation by bacterium were determined as 7 and 28 °C, respectively. P. putida NRRL B-14878 exhibited the highest Mn (II) oxidation performance (0.01025 mM/day) at pH of 7, 28 °C and Mn (II) concentration of 0.546 mM. Finally, characterization studies have revealed that biogenic manganese oxides are poorly crystallized and Mn (III) is the main valence state.
14 December 2019 in Water, Air, & Soil Pollution
1 September 2018 in Journal of Environmental Engineering
In this paper, manganese oxide octahedral molecular sieves (OMS-2) as a novel catalyst were used in activation of persulfate (PS) for Remazol Brilliant Blue R (RBBR) dye removal. The dye removal efficiencies of different systems including OMS-2 only, PS only, and OMS-2/PS were evaluated, and complete removal using the OMS-2/PS system was achieved in 30 min. It was found that operation parameters such as pH, OMS-2, PS, and RBBR concentrations affected RBBR removal. The OMS-2/PS system exhibited excellent catalytic activity in the pH range of 2.52–8.09. The reaction time decreased with increasing OMS-2 and PS concentrations. Quenching tests using tert-butanol and ethanol suggested that sulfate radicals in the OMS-2/PS system are the dominant reactive species. The RBBR degradation reactions could be well-described by the first-order kinetic model. In the optimized condition, total organic carbon (TOC) removal efficiency was 56.8% after 60 min. Ultraviolet-visible (UV-vis) spectra were used to ascertain the OMS-2/PS system. The practical applicability of the OMS-2/PS system was also investigated for simulated wastewater.
9 May 2020 in Water, Air, & Soil Pollution
11 November 2021 in Geomicrobiology Journal
Atrazine is a widely used herbicide today and is usually detected at high concentrations in aqueous media. Its presence in aquatic environments poses a serious risk to human and environmental health. Adsorption is a promising technology for the removal of persistent organic materials. In this study; dried biogenic manganese oxide (BMO) as a novel adsorbent material was used to control the atrazine pollution. The removal of atrazine by dried BMO was investigated in batch and fixed-bed column reactors. Batch studies revealed that maximum atrazine removal was 98.1% at a temperature of 50 °C, pH: 12.0 and an atrazine concentration of 0.5 mg L−1. The maximum atrazine adsorption capacity was 2.124 mg g−1 at 50 °C, pH: 12.0 and atrazine concentration of 10 mg L−1. The Freundlich isotherm fitted very well to experimental data. Adsorption followed the pseudo-first-order type kinetic. Thermodynamic values such as Gibbs free energy, enthalpy and change in entropy were measured as −26.02 kJ mol−1 (30 °C), 106.48 kJ mol−1 and 0.43947 kJ mol−1 K−1, respectively and the adsorption process was found to be spontaneous and endothermic. The effects of parameters such as feed flow rate, initial atrazine concentration and BMO amount on the atrazine removal were investigated in a fixed-bed column reactor. When a flow rate of 4 mL min−1, atrazine concentration of 2 mg L−1 and BMO of 2 g were used, the equilibrium atrazine uptake (qeq) was 0.41 mg g−1.