29 July 2014 in IEEE Journal of Solid-State Circuits
This paper presents a clockless digital filter able to process inputs of different rates and formats, synchronous or asynchronous, with no adjustment needed to handle each input type. The filter is designed using a mix of asynchronous and real-time digital hardware, and for this reason relies on neither a clock nor the input data rate for setting its frequency response. The modular architecture of the filter, including delay segments with separated data and timing paths and a pipelined multi-way adder, allows easy extensions for different data widths. The filter was used as part of an ADC/DSP/DAC system which maintains its frequency response intact for varying sample rates without requiring any internal change. This property is not possible for any synchronous DSP system. The 16-tap, 8-bit FIR filter, integrated in a 130 nm CMOS process, includes on-chip automatic delay tuning, and for certain inputs, has signal-to-error ratio which exceeds that of clocked systems.
4 December 2017 in IEEE Journal of Solid-State Circuits
Presented is the first continuous-time (CT) digital infinite impulse response (IIR) filter working on signal-derived timing in lieu of a clock. We introduce a novel design method which enables the design of high-order IIR filters using only two tap delays. An event-grouping technique is also introduced to prevent parasitic oscillations in the presence of tap delay mismatches. The 1.2-V, 65-nm CMOS prototype implements a sixth-order IIR filter, with a maximum input rate of 20 Msample/s and a stop-band rejection of more than 80 dB. Without using any power-down circuitry, the chip's power consumption tracks the input activity in a fully agile manner, and varies by more than 50$x $, from 0.04 to 2.32 mW. The filter achieves an figure of merit (FoM) which competes with that of discrete-time (DT) filters, while avoiding the use of a clock and an antialiasing filter. Compared to prior art in CT digital signal processings, the prototype achieves 45-dB improvement in stop-band rejection and 9x smaller delay line area. For the first time, the filtered CT digital signal is converted to synchronous mode at the end of signal chain, allowing integration with DT digital systems.
1 January 2008 in IEEE Solid-State Circuits Society Newsletter
In a groundbreaking and now classic 1977 paper, Eric Vittoz and J. Fellrath meticulously characterized and developed models for devices operating in the weak inversion region, as well as a variety of circuit building blocks that could operate and exploit the exponential characteristics in this region. Their killer application -- the electronic watch -- employed techniques that are now used in a score of low-voltage, micropower applications, such as biomedical devices, hearing aids, pagers, sensor interfaces, motion detectors for pointing devices, and a variety of portable instruments. This tribute to Vittoz as an educator and industrial researcher is by Yannis Tsividis of Columbia University, an esteemed scientist and educator in his own right.
1 January 2008 in IEEE Solid-State Circuits Society Newsletter
When one compares today's students to those of earlier generations, the differences are striking. Yet the way most of us teach has essentially remained unchanged since the middle of the past century. No wonder, then, that our students are not attracted to electrical engineering or, among those who are, many are disappointed and just drag along, or even drop out. In this article we discuss what can be done to turn things around. Parts of this article draw on an earlier one on an introductory EE class.