30 June 2022 in Eastern-European Journal of Enterprise Technologies
A given model of yield forecasting using an artificial neural network connects the wheat crop with the amount of productive moisture in the soil, soil fertility, weather, and factors in the presence of pests, diseases, and weeds. The difficulty of creating a yield forecast system is in the correct choice of predictors that have the greatest impact on yield. To build the model, moisture in the 100 cm layer of the soil, the content of nitrogen, phosphorus, humus, and soil acidity in the soil were used as input parameters. The amount of precipitation over 4 months, the average air temperature for the same period, as well as the presence of diseases, pests, and weeds were also taken into consideration. Data on 13 districts of the North Kazakhstan region in the period from 2008 to 2017 were used. The output parameter was the yield of spring wheat over the same time period. The relative importance of input variables in relation to the output variable was used to determine the weight values of input variables. An artificial neural network of error backpropagation was used as a method. The advantage of this method is that the quality of the forecast increases with a large amount of training data, as well as the ability to model nonlinear relationships between different data sources. After training the artificial neural network and obtaining predictive data, good results were achieved for predicting wheat yields (p=0.52, mean absolute error in percentage (MAPE)=12.02 %, root mean square error (RMSE)=3.368). Thus, it is assumed that the developed model for forecasting wheat yields based on data can be easily adapted for other crops and places and will allow the adoption of the right strategies to ensure food security
1 May 2019 in IOP Conference Series: Materials Science and Engineering
The article describes the principles of construction of a wireless automated system of Holter monitoring of cardiac activity which is focused on the minimum power consumption for use at home. This article proposes the method of wireless transmission of electrocardiosignals based on the use of a dual-processor transmitting Wi-Fi device. It also presents the algorithms of wireless transmission of electrocardiosignals providing high reliability of the transmitted information and develops the structure of the Holter monitoring system in three deflections using the multiplexing method in the formation of such deflections. The proposed methods and algorithms shall provide high-quality and multi-day wireless transmission of electrocardiosignals with low energy consumption.
30 August 2024 in Eastern-European Journal of Enterprise Technologies
The object of this study is a wireless local Wi-Fi network for broadcasting biomedical signals, its structure, and principles of construction. The task of minimizing the power consumption of a Wi-Fi transmitter has been addressed, which provides the possibility of building a wireless system for long-term monitoring of biomedical signals. As a result, a functional diagram of a wireless Holter monitoring system based on an ESP32 microcontroller was constructed, which includes a subsystem for setting up and diagnosing system units using MATLAB software packages, an ECG signal generator, and a multifunctional PCIe board from National Instruments. Evaluation criteria and methods for minimizing power consumption by an autonomous Wi-Fi transmitter have been proposed. Methods for synchronizing the working cycles of the transmitter and receiver of the Holter monitoring system were determined. A procedure for determining the optimal biosignal measurement frequency is presented, at which the distortion of ECG signals would be minimal, which means that the signal could be transmitted without losses. The concept of constructing an algorithm for implementing a program for a Wi-Fi transmitter has been developed, ensuring parallel execution of ECG signal measurement operations and their transmission over a local network. The data from semi-naturalistic tests with an experimental Holter monitoring system with a pre-setup subsystem and using external measuring devices, a computer, and the MATLAB software environment are presented. A comparative analysis of the experimental data with primary ECG signals and ECG signals at the receiver output showed a fairly stable correspondence between the input and output ECG signals. The proposed algorithms make it possible to reduce the average current consumption of the ESP32 microcontroller to 50.5 mA. The results of the study demonstrate the possibility of constructing an energy-efficient wireless system for long-term monitoring of biomedical signals based on the Wi-Fi interface
31 March 2026 in Bulletin of Toraighyrov University. Energetics series
The paper presents the development of wheat yield forecasting model in North-Kazakhstan region using artificial neural network. In the course of the study the key predictors of yield were identified, including meteorological indicators (the sum of precipitation during the growing season, average daily air temperature), agrochemical characteristics of soil (moisture at a depth of 0,1 m, 0,5 m and 1 m) and phytosanitary conditions. The constructed neural network model based on the back-propagation algorithm with Levenberg–Marquardt optimization demonstrated high forecasting accuracy: on the test subset the root-mean-square error (RMSE) was 3.368, the mean absolute percentage error (MAPE) was 12.02 %, and the coefficient of determination was R² = 0.9831. These values indicate both low absolute and relative prediction error and stable generalization of the model. The developed system can be used by agrarians to estimate expected yields and optimize resource consumption, as well as integrated into agrometeorological services. Prospects for further development include expansion of the input data set through satellite monitoring and adaptation of the model to changing climatic conditions. The scientific novelty of this study lies in the development and experimental validation of a regional wheat yield forecasting model for the North-Kazakhstan region based on an artificial neural network that simultaneously integrates agrochemical, meteorological and phytosanitary factors at the level of 13 districts. An optimized three-layer network architecture trained with the Levenberg–Marquardt algorithm is tailored to a multi-year (2008–2017) regional data set, and the resulting model achieves high predictive accuracy (R² = 0.9831 with low RMSE and MAPE), demonstrating the advantages of the neural-network approach for regional agrometeorological monitoring and yield planning. Keywords: wheat, yield predictors, artificial neural network, MATLAB, yield forecasting
10 February 2025 in Vestnik of M. Kozybayev North Kazakhstan University
The article offers innovative circuit engineering solutions in the field of electric vehicles. The existing electrical and functional circuits of electric cars imply the presence of expensive electronic components, both in the control unit and in the wireless charging unit. An analysis of existing low- and medium-weight electric cars suggests that existing electronic circuits can be upgraded by replacing expensive elements with more affordable electronic components.In particular, it is proposed to introduce the STM32 microcontroller into the control and charging system of electric cars, which is actively used in technical projects of small and medium complexity. It is also acceptable to control a low-mass electric car using KYL-300L radio modules operating in the megahertz range.The electrical structural schemes proposed in the study will make it possible to implement simplified circuit design solutions for small and medium-weight electric cars. In the future, the authors plan to create a mock-up of a small electric car based on the proposed schemes.