21 August 2017 in Nuclear Fusion
19 June 2018 in Plasma Physics and Controlled Fusion
Modeling of impurity-seeded plasma in Large Helical Device is presented for the first time by using the three-dimensional transport code EMC3-EIRENE. High and low recycling coefficients for impurity ions are assumed to include low and high absorption rates on wall surfaces due to low and high chemical activity of neon and nitrogen, respectively. Radiation power measured by two bolometer systems and particle flux measured by divertor probes installed in multiple toroidal sections are utilized to determine impurity amount in the plasma. The toroidal uniformity and the non-uniformity of a divertor flux reduction observed experimentally for neon and nitrogen seeding, respectively, are reproduced by the model. Validations by measurements and deviations between the model and the experiment are discussed.
18 June 2018 in Nuclear Fusion
Isolated regions of nano-tendril bundles (NTBs) have been grown on tungsten surfaces exposed to low-pressure direct-current (DC) helium plasma discharges operating with the addition of impurity gases, including neon, argon, nitrogen and residual air. Through the variation of impurity gas partial pressures and bombarding ion energies, threshold conditions and operational ranges for the growth of NTB's have been investigated. It was found that increasing the vacuum base-pressure from ~10-5 to ~10-4 Pa during the experiment could give rise to NTB formation without the need for other additional gases. In general, the required impurity gas ratio and the incident ion energy necessary to form these structures was found to vary across the range of different additional gas species, with a key parameter being the net erosion yield (Y) due to ion bombardment, Y ~ 10-2−10-3, with the morphology altering with changing net erosion yield. It is predicted that erosion-deposition processes acting upon existing He-induced morphology changes are the precursors for NTB growth.
1 December 2017 in Fusion Engineering and Design
11 May 2009 in Nuclear Fusion
For the first time, fluctuation characteristics at the high-field side (HFS) and low-field side (LFS) scrape-off-layers (SOLs) in L-mode plasmas of the JT-60U tokamak are compared in detail; the plasma transport is studied using reciprocating Langmuir probes. A statistical analysis based on probability density functions (PDFs) is employed to describe intermittent (nondiffusive) transport in SOL plasma fluctuations. It is found that positive bursty events associated with blobby plasma transport appear frequently at the LFS midplane. Further, the PDF at the LFS midplane is strongly positively skewed, while the PDF at the HFS SOL is close to a Gaussian distribution. The conventional conditional averaging method is improved by using the variable-interval time-averaging method along with it, which enables the precise reconstruction of the burst profile exhibiting a rapid increase and a slow decay. The radial evolution of plasma blobs is analysed by using an autocorrelation function, the short-time Fourier transform and wavelet analysis.
1 April 2018 in Surface and Coatings Technology