2 February 2023 in Marine Georesources & Geotechnology
To enhance the sampling and exploration of the gas hydrate resources and other seafloor mineral resources within the seafloor sediment stratum, a deep-sea stratum drilling robot inspired by the earthworm’s peristaltic movement was developed in this paper. The support anchor unit is a part of this new type of robot. When the robot moves forward, it must rely on the support anchor unit to provide enough supporting force to counteract the various resistance forces on the front body units. In this paper, the maximum anchoring force of the support anchor unit, also known as the pullout force, is determined by theoretical calculation. The soil failure area during the pulling-out was obtained by simulation for visualization. The maximum anchoring force of the unit in the soil of different properties with different speeds was also obtained by tests to verify the theoretical calculations. And the effect of the support plates’ unfolding action on the maximum anchoring force was further analyzed in this research. The test results provide a helpful research basis for subsequent analysis of the robot’s movement pattern in soil and the effect of movement at different speeds.
30 December 2021 in Marine Technology Society Journal
The underwater hydraulic connector is one of the most important components of an underwater oil production system. The equipment is mainly used to transport oil, chemical reagents, and other high-pressure fluids. We developed a novel underwater hydraulic multi-way quick connector system (MQCS) that is able to realize simultaneous, rapid, and precise plugging and unplugging of 10 underwater pipelines. It can be widely used for connection between subsea oil production equipment. The MQCS consists of a fixed plate assembly that is fixed to the oil production equipment and a free plate assembly that is connected to the pipelines on the drilling platform. This study describes the structure and working principle of the MQCS in detail. In addition, the process of the elastic collet clamping the mandrel was studied. Based on the finite element analysis software Abaqus, we investigated how the key geometric parameters of the elastic collet influence the axial force that needs to be provided by the underwater robot. A prototype was built based on the simulation results. To verify the performance of MQCS, a high-pressure chamber test was conducted. The results show that MQCS can accurately connect 10 high-pressure lines (about 69 MPa) in a high-pressure chamber and there is no pressure drop for 3 h after docking.