The performances of the fiber optic-based displacement sensor with reflective and transmitting techniques were investigated. The effects of axial displacement on the detected voltage were investigated for different tilting angles of the reflective and receiving fibers. Three types of light sources were used, yellow and red He-Ne including a green pointer laser at peak wavelengths of 594, 633, and 533 nm correspondingly. The highest sensitivity and resolution were obtained at 0.0017 mV/μm and 4 μm, respectively with the employment of a 594 nm laser as the light source. These were attributed to the output power and beam quality of the laser which was the highest. The tilting angles didn’t change the sensitivity and resolution of the sensors in both setups. The widest linear range was obtained at 2410 μm with the transmitting technique. The simplicity of the design, high degree of sensitivity, linear range, non-contact measurement and low cost fabrication make it suitable for industrially-orientated applications that include control and micro-displacement in the hazardous region.
27 November 2019 in International Journal of Optics
Detection of rhodamine B concentration in distilled water can be conducted without direct contact between the sensor probe and the sample using fiber bundle as a sensor probe and concave mirror as a sample container. The fiber bundle used is a concentric and a pair bundle probe. The working mechanism of the sensor is based on the displacement sensor and absorption of rhodamine B on laser light at a wavelength of 543 nm. The concentration of rhodamine B was detected through the valley and the peak voltage resulting from the displacement of the sensor probe to the sample surface. The best performance is shown by a sensor that uses a concentric bundle as a probe with a detection range of 0–20 ppm with a resolution of 0.6 ppm.
22 August 2018 in Sensors and Actuators A: Physical