28 June 2007 in Combustion Science and Technology
Reactive mixtures of aluminum (Al) and polytetrafluoroethylene (PTFE or Teflon) have applications in propellants, explosives, and pyrotechnics. This study examines the thermal degradation behavior of Teflon and nanometer scale Al particles compared with micron-scale Al particles. Differential scanning calorimetry and thermo-gravimetric analyses were performed in an argon environment on both nanometer and micron scale particulate mixtures revealing lower ignition temperatures and larger exothermic activity for the nanometer Al/Teflon mixture. This increased ignition sensitivity and exothermicity is caused by a pre-ignition reaction unique to the nano-Al mixture. Experiments suggest that the pre-ignition reaction mechanism is controlled by the fluorination of the Al particle passivation shell. Micron-scale Al particles have a lower specific surface area and therefore the influence of the passivation shell promoting a pre-ignition reaction is reduced. Chemical kinetics are discussed along with particle morphology to explain the thermal degradation process of the mixtures. These results are helpful in the fundamental understanding of Al particle size effects on the reactivity of Al/Telfon composites.
7 July 2017 in ACS Applied Materials & Interfaces
23 August 2010 in Physical Chemistry Chemical Physics
The threat of biological weapons is a major concern in the present day and has led to studying methods to neutralize spore forming bacteria. A new technique involves the use of a thermite reaction that exhibits biocidal properties to limit bacterial growth. The objective was to examine the influence on bacteria growth upon spore exposure to thermite reactions with and without biocidal properties. Three thermites are considered: two that have biocidal properties (aluminium (Al) combined with iodine pentoxide (I2O5) and Al combined with silver oxide (Ag2O)); and, one that produces a highly exothermic reaction but has no biocidal properties (Al combined with iron oxide (Fe2O3)). Results show that Al + I2O5 is extremely effective at neutralizing spores after only one hour of exposure. The temperature generated by the reaction was not determined to be an influential factor affecting spore growth kinetics. Further analysis of the thermite reactions revealed that the Al + I2O5 reaction produces iodine gas that effectively interacts with the spores and neutralizes bacteria growth, while the Al + Ag2O reaction temperature does not vaporize silver. In the condensed phase silver does not interact with the spores enough to neutralize bacteria growth. This study gives evidence that a thermite can be used as a stable transportation and delivery system for biocidal gas.
16 June 2010 in Journal of Thermal Analysis and Calorimetry
23 May 2018 in Scientific Reports
A new synthesis approach for aluminum particles enables an aluminum core to be passivated by an oxidizing salt: aluminum iodate hexahydrate (AIH). Transmission electron microscopy (TEM) images show that AIH replaces the Al2O3passivation layer on Al particles that limits Al oxidation. The new core-shell particle reactivity was characterized using laser-induced air shock from energetic materials (LASEM) and results for two different Al-AIH core-shell samples that vary in the AIH concentration demonstrate their potential use for explosive enhancement on both fast (detonation velocity) and slow (blast effects) timescales. Estimates of the detonation velocity for TNT-AIH composites suggest an enhancement of up to 30% may be achievable over pure TNT detonation velocities. Replacement of Al2O3with AIH allows Al to react on similar timescales as detonation waves. The AIH mixtures tested here have relatively low concentrations of AIH (15 wt. % and 6 wt. %) compared to previously reported samples (57.8 wt. %) and still increase TNT performance by up to 30%. Further optimization of AIH synthesis could result in additional increases in explosive performance.
28 September 2017 in The Journal of Physical Chemistry C