Aerobic granular sludge has a number of advantages over conventional activated sludge flocs, such as cohesive and strong matrix, fast settling characteristic, high biomass retention and ability to withstand high organic loadings, all aspects leading towards a compact reactor system. Still there are very few studies on the strength of aerobic granules. A procedure that has been used previously for anaerobic granular sludge strength analysis was adapted and used in this study. A new coefficient was introduced, called a stability coefficient (S), to quantify the strength of the aerobic granules. Indicators were also developed based on the strength analysis results, in order to categorize aerobic granules into three levels of strength, i.e. very strong (very stable), strong (stable) and not strong (not stable). The results indicated that aerobic granules grown on acetate were stronger (high density: >150 g T SSL−1 and low S value: 5%) than granules developed on sewage as influent. A lower value of S indicates a higher stability of the granules.
Debris flows are among the fatal geological hazards in Malaysia, with 23 incidents recorded in the last two decades. To date, very few studies have been carried out to understand the debris flow processes, causes, and runouts nationwide. This study simulated the debris flow at the Mesilau watershed of Kundasang Sabah caused by the prolonged rainfall after the 2015 Ranau earthquake. Several interrelated processing platforms, such as ArcGIS, HEC-HMS, and HyperKANAKO, were used to extract the parameters, model the debris flow, and perform a sensitivity analysis to achieve the best-fit debris flow runout. The debris flow travelled at least 18.6 km to the Liwagu Dam. The best-fit runout suggested that the average velocity was 12.5 m/s and the lead time to arrive at the Mesilau village was 4.5 min. This high debris flow velocity was probably due to the high-water content from the watershed baseflow with a discharge rate of 563.8 m3/s. The flow depth and depositional thickness were both lower than 5.0 m. This study could provide crucial inputs for designing an early warning system, improving risk communication, and strengthening the local disaster risk reduction and resilience strategy in a tectonically active area in Malaysia.
The reliance on roads to provide fluent mobilization has raised great concern when facing functional degradation. Disruption of the critical segments of a road network may significantly increase the distance traveled by a community. This paper proposes a method for measuring road network vulnerability when facing disruption by assessing all road segments within a network. The assessment is based on two of the shortest disjointed diversion routes from one end of the segment to the other, supporting the strategy of reaching equilibrium flow in an emergency condition. To generate diversion routes for the purpose of reconnecting a disrupted segment, the shortest path patterns are generated through the formation of adjacent polygons using GIS. Accordingly, this paper proposes a segment vulnerability index based on the support of diversion routes. Additionally, the model introduces supporting vulnerability, a parameter for measuring the potential of a road segment becoming a supporting diversion route when its surrounding segments are disrupted. By adopting the Malaysian Peninsular road network as a case study, the developed index can assist transportation agencies in planning and maintaining road assets while prioritizing vulnerable road segments relative to the entire road network.