27 July 2016 in IEEE Transactions on Antennas and Propagation
This paper presents a dual-polarized patch antenna with quasi-elliptic bandpass responses. The proposed antenna is mainly composed of a feeding network, a driven patch, and a stacked patch, with its entire height being 0.09λ. The feeding network consists of two orthogonal H-shaped lines that coupled to the driven patch, each for one polarization. The elaborately designed feeding lines not only ensure a sharp roll-off rate at the lower band edge, but also help to achieve low cross polarization and high isolation between two feeding ports. On the other hand, the upper stacked patch provides improved suppression levels at the upper stopband and also an enhanced gain within passband. Consequently, a compact dual-polarized antenna with satisfying filtering performance is obtained, without using extra filtering circuits. For demonstration, an antenna is designed to fit the specification of LTE band (2.49-2.69 GHz). The implemented antenna achieves an average a gain of 9 dBi, a cross-polarization ratio of 29 dB, an isolation of 35 dB within LTE band. The out-of-band suppression level is more than 40 dB within the 2G and 3G frequency bands from 1.71-2.17 GHz. It can be used as the antenna elements in multiband base station antenna arrays to reduce the mutual coupling.
15 February 2017 in IEEE Transactions on Antennas and Propagation
A low profile stacked dielectric resonator antenna (DRA) and a microstrip metasurface (MS) antenna are investigated and compared in this communication. It has been found that very similar radiation performance including resonant modes, reflection coefficients, boresight gains, and radiation patterns can be obtained between them, indicating that the dielectric superstrate of stacked DRA plays analogous role with MS in enhancing the antenna bandwidth and realized gain. Based on this observation, a broadband, low profile, and high gain filtering cylindrical stacked DRA is inspired by an MS-based filtering antenna. Four resonant modes including the higher order HEM 31δ mode and HEM 13δ mode are simultaneously excited in the DRA to provide a broad bandwidth of 61.4% and a peak gain of 11.4 dBi within passband, whereas a shorting via and two pairs of transverse stubs are introduced into the feeding microstrip line to generate radiation nulls in stopband and realize filtering function. Second harmonic suppression has been achieved without increasing the footprint of the antenna, and an out-of-band suppression of more than 23 dB is obtained within the wide stopband.
10 August 2017 in IEEE Transactions on Antennas and Propagation
This paper presents a multiple-input and multiple-output antenna using a wideband decoupling structure for enhancing isolation. The decoupling structure is formed by a split ring, which consists of an inductive line and a capacitive gap to realize magnetic and electric coupling, respectively. By introducing the electric coupling in addition to the magnetic coupling, more degrees of freedom are obtained and the original coupling between antennas can be canceled out within a wide frequency band. Meanwhile, the performance of each antenna element is maintained, such as impedance bandwidth and radiation characteristics. Theoretical analysis and experimental verification are carried out. When the decoupling structure is placed between these two monopole antennas with edge-to-edge space of only 5 mm (0.04 λ 0 at 2.5 GHz), more than 20 dB isolation is realized over the bandwidth of 2.3-2.9 GHz (24%) with S 11 and S 22 less than -10 dB. Moreover, the isolation levels reach more than 30 dB over the frequency band of 2.3-2.8 GHz. Compared with the previous related works using decoupling networks and neutralization line techniques, the proposed decoupling structure can provide higher isolation of over 30 dB in a wider bandwidth.
6 July 2017 in IEEE Transactions on Antennas and Propagation
This paper presents a compact dual-band 4 × 8 antenna array with dual polarizations and two beams for basestation applications. It consists of two 4×4 subarrays operating at 3G (1710-2170 MHz) and long term evolution (2490-2690 MHz) bands. For size miniaturization, the elements of the two 4 × 4 subarrays are interleaved with each other. The mutual coupling between the elements operating at different bands is suppressed by using filtering antennas with out-of-band radiation suppression. And the spacing between them can be decreased, resulting in array miniaturization. To obtain stable two-beam radiation patterns within the two operating bands, the beam-forming networks with little magnitude and phase imbalances are specially designed for each band. For demonstration, the proposed 4 × 8 array is implemented. In the measurement, the array exhibits stable 10-dB beamwidth around 120° in the azimuth plane within the two entire bands. As a result, the two-beam radiation patterns satisfy the coverage requirement of 120° in the azimuth plane for base-station applications. Additionally, 16.4 dBi/15.5 dBi peak gains and around -10 dB cross levels at the junction of two beams are achieved within the two operating bands. Compared with typical industrial products, the proposed array features both compact size and stable radiation patterns. Moreover, the proposed method can easily be extended to multibeam basestation array designs.
19 June 2017 in IEEE Transactions on Antennas and Propagation
This paper presents two compact patch antenna arrays using a novel feeding scheme to integrate bandpass responses. The two arrays have no filtering circuits but reveal high filtering performance. For each array, only a microstrip feed line is coupled to radiating patches and specific coupling regions are employed to obtain the desired current distribution on the radiating patches. In the operating band, the induced currents on the patches are in phase, resulting in high boresight gain. At the out-of-band frequencies, the patches are not excited or the induced currents on them are 180° out of phase, resulting in radiation suppression. Using this method, out-of-band radiation can be suppressed without degrading the in-band performance. For demonstration, a four-element planar patch array is first implemented. Single-band bandpass response is observed in the experiment. Measured in-band gains are 12.6 dBi, whereas out-of-band suppression is more than 20 dB. Then the feeding scheme is employed to design two three-element subarrays to form a planar dual-band patch array. Also, dual-band bandpass responses are obtained with high frequency selectivity.
18 April 2017 in IEEE Transactions on Antennas and Propagation
This paper presents a very small-size uniplanar printed monopole antenna design with an overall size of only 8.7 mm × 5.4 mm × 0.8 mm. It is comprised of an open-ring structure and a hook-shaped radiating element that is extended within this open-ring structure. The proposed antenna can excite two resonance modes with broad 10-dB impedance bandwidths of 6.4% (2.35-2.51 GHz) and 19.5% (4.90-6 GHz), and this dual-band operation can cover the entire WLAN 2.4/5.2/5.8-GHz bands. Furthermore, a good gain of 3.34-5.38 dBi and desirable radiation efficiencies of 52%-87% were also measured across the two bands of interest.