Recently, thoughtful disagreements between scientists concerning environmental issues including the use of renewable materials have enhanced universal awareness of the use of biodegradable materials. Polylactic acid (PLA) is one of the most promising biodegradable materials for commercially replacing nondegradable materials such as polyethylene terephthalate and polystyrene. The main advantages of PLA production over the conventional plastic materials is PLA can be produced from renewable resources such as corn or other carbohydrate sources. Besides, PLA provides adequate energy saving by consuming CO2 during production. Thus, we aim to highlight recent research involving the investigation of properties of PLA, its applications and the four types of potential PLA degradation mechanisms. In the first part of the article, a brief discussion of the problems surrounding use of conventional plastic is provided and examples of biodegradable polymers currently used are provided. Next, properties of PLA, and (Poly[L‐lactide]), (Poly[D‐lactide]) (PDLA) and (Poly[DL‐lactide]) and application of PLA in various industries such as in packaging, transportation, agriculture and the biomedical, textile and electronic industry are described. Behaviors of PLA subjected to hydrolytic, photodegradative, microbial and enzymatic degradation mechanisms are discussed in detail in the latter portion of the article.
Hydrogels are hydrophilic polymer materials that can swell but are insoluble in water. Hydrogels can be synthesized with synthetic or natural polymers, but natural polymers are preferred because they are similar to natural tissues, which can absorb a high water content, are biocompatible, and are biodegradable. The three-dimensional structure of the hydrogel affects its water insolubility and ability to maintain its shape. Cellulose hydrogels are preferred over other polymers because they are highly biocompatible, easily accessible, and affordable. Carboxymethyl cellulose sodium (CMCNa) is an example of a water-soluble cellulose derivative that can be synthesized using natural materials. A crosslinking agent is used to strengthen the properties of the hydrogel. Chemical crosslinking agent is used more often than physical crosslinking agent. In this review, article, different types of crosslinking agents are discussed based on synthetic and natural crosslinking agents. Hydrogels that utilize synthetic crosslinking agent have advantages, such as adjustable mechanical properties and easy control of the chemical composition. However, hydrogels that use natural crosslinking agent have better biocompatibility and less latent toxic effect.
Recently, the demands of biodegradable plastic for mulching application have vastly increased due to environmental concern, conservation of soil health and ease of residue management after growing season. The raise in demands also reflected by the increased number of studies related to biodegradable plastic mulch in the past 10 years. Biodegradable plastic mulch film has emerged as a promising alternative material for mulching due to ease of installation, offers benefits comparable to polyethylene (PE) mulch film, in situ biodegradation and able to improve soil fertility. This review sheds light on recent advances in different formulations of plastic mulch film. Formulations based on single polymer, polymer blends and polymer composites of biodegradable natural and synthetic polymeric materials particularly for mulching application were discussed. Comprehensive discussions on the performance of different formulations used for mulching material are reviewed in this review article.
Tensile and electrical properties of graphene nanopowder (GNP) and multiwalled carbon nanotubes (MWCNT) filled epoxy thin film nanocomposites were investigated. In addition, synergy effects of various mixture ratios of GNP–MWCNT hybrids on the properties of the epoxy thin film nanocomposites were evaluated. It was found that the addition of GNPs or MWCNTs decreased the tensile properties compared to that of unfilled epoxy. The electrical percolation threshold of MWCNT/epoxy was found to be 0.8 vol%. Addition of only 0.1 vol% GNPs results in significant improvement in the electrical properties of the composites. Enhanced tensile and electrical properties in the GNP–MWCNT/epoxy hybrid were achieved with GNP–MWCNT ratio of 0.1:0.4. Morphological analysis confirmed the uniform dispersion of both GNPs and MWCNTs within the epoxy matrix. For the hybrid GNP–MWCNT filler system (i.e., with the 0.1:0.4 ratio), MWCNTs were seen to align themselves on the GNPs surfaces creating an interconnected strong nanofiller network in the epoxy.