We propose the design of a novel porous-core honeycomb lattice photonic crystal fiber (PH-PCF) with extremely low loss and flattened dispersion for guiding terahertz (THz) wave. Finite element method (FEM) is used to investigate in detail the properties of the designed waveguide. The single modeness, effective material loss (EML), confinement loss (Lc), effective modal area, bending loss, distribution of power in different regions, and the dispersion profile of the designed structure are systematically analyzed. Simulation results of the proposed PHPCF confirm that the bulk material absorption loss of the host material Topas can be reduced by 88.87% using the proposed design. The obtained EML is as low as 0.02227 cm-1 at operating frequency f = 1 THz and the dispersion is ±0.15 ps/THz/cm, flattened over a band of frequency as wide as 1.15 THz. Besides, the reported design also offers negligible Lc and relatively smaller bending loss as compared to other contemporary studies.
The aim of this paper is to design the effective shape of a microstrip patch antenna which can provide lower return losses, better gain and performance for X-band (2 GHz to12 GHz), Ku-band (12 GHz to 18 GHz) and K-band (18 GHz to 26 GHz) applications. Attempts have been made to optimize the antenna performance by increasing the number of slots, by using slots in different position in patch and by using array technique. The simulation is performed by using GEMS simulator which is commercially available antenna simulator. The antenna is designed by using Taconic TLY-5 dielectric substrate with permittivity □ r =2.2 and height, h=1.588 mm. Without using array technique we have got the return losses in the range of -20 db to -25 db at the frequencies around 19.5 GHz. The series feed array offers -7.25 db return loss around 11.5 GHz, -17.5 db return loss around 16 GHz and -13db return loss around 21GHz. Therefore, this antenna is suitable for X-band, Ku-band and K- band applications.
10 January 2019 in Optical and Quantum Electronics
A suspended core microstructured fiber with extremely high birefringence has been proposed for terahertz (THz) wave propagation. An elliptical-shaped core has been formed with slotted rectangular airholes to disrupt the vertical symmetry of the refractive index of the designed fiber. Different design parameters such as the core diameter, ellipticity, porosity, and suspended strut width have been checked to achieve optimum performance from the fiber. The resultant birefringence of the proposed fiber is unprecedented, of the order of ( to be precise) with a low effective material loss of and confinement loss of at 1 THz. The dispersion of the designed fiber is below 1 ps/THz/cm extended over a band of 500 GHz (1–1.5 THz) with almost flat profile. It is expected that this fiber could be useful in interferometry, filtering, and sensing applications in the THz range where polarized lights are favorably essential.
1 August 2017 in Journal of the Optical Society of America B
An extremely low loss porous-core fiber with nearly zero dispersion flattened over a wide band of frequency in the terahertz (THz) regime is presented in this paper. A novel structure of hexagonal air holes in both the core and the cladding is introduced to provide an overwhelming reduction in bulk material absorption loss and confinement loss. Numerical analysis shows that an effective material loss as low as and a very flat dispersion of can be obtained from the proposed fiber in the frequency range of 0.98–1.64 THz. Within the whole frequency band, the fiber operates in a single-mode region and shows a variation in total loss of only .
A laser diode subjected to optoelectronic feedback in which some light is converted to photocurrent that is fed back into the laser injection terminals can display periodic oscillations in its optical intensity. We demonstrate experimental and numerical evidence that, as the feedback level is varied, a stepwise change in the oscillation frequency manifests itself in the output optical intensity. These transitions in the dynamics can either correspond to an abrupt jump between two limit cycles, associated with a subcritical torus bifurcation of a limit cycle, or to a progressive switching mediated by an intermediate quasiperiodic state. Finally, when ramping the feedback level down, hysteresis is observed in the sequence of switching events between the limit cycles. Such devices are of interest for photonic microwave sources for wavelength-division multiplexed radio-over-fiber systems.