Objectives. To improve the process of developing energy-efficient flowsheets for the distillation separation of multicomponent aqueous and organic mixtures based on a comprehensive study of the phase diagram structures, including those in the presence of additional selective substances.Methods. Thermodynamic-topological analysis of phase diagrams; modeling of phase equilibria in the AspenTech software package using the equations of local compositions: Non-Random Two Liquid and Wilson; computational experiment to determine the column parameters for separation flowsheets of model and real mixtures of various nature.Results. The fractionation conditions of the origin multicomponent mixture due to the use of sharp distillation, pre-splitting process, extractive distillation with individual and binary separating agents were revealed. The columns operation parameters and the energy consumption of the separation flowsheets ensuring the achievement of the required product quality with minimal energy consumption were determined.Conclusions. Using the original methods developed by the authors earlier and based on the generalization of the results obtained, new approaches to the synthesis of energy-efficient multicomponent mixtures separation flowsheets were proposed. The provisions that form the methodological basis for the development of flowsheets for the separation of multicomponent mixtures and supplement the standard flowsheet synthesis plan with new procedures were formulated.
1 March 2014 in Theoretical Foundations of Chemical Engineering
Extractive agents for separating benzene-perfluorobenzene biazeotropic mixture have been suggested according to the results of excess Gibbs energy analysis for systems containing benzene, perfluorobenzene and selective substances.
Objectives. Synthesis and comparative analysis of the extractive distillation flowsheets for aqueous mixtures of solvents utilized in pharmaceutical industries using the example of a methanol−tetrahydrofuran−water system with various compositions. The ternary system contains two minimally boiling azeotropes that exist in a vapor–liquid phase equilibrium. To evaluate the selective effect of glycerol, the phase equilibria of the methanol–tetrahydrofuran–water and methanol–tetrahydrofuran–water–glycerol systems at 101.32 kPa were studied.Methods. The calculations were carried out in the Aspen Plus V.9.0 software package. The vapor–liquid equilibria were simulated using the non-random two-liquid (NRTL) equation with the binary interaction parameters of the software package database. To account for the non-ideal behavior of the vapor phase, the Redlich–Kwong equation of state was used. The calculations of the extractive distillation schemes were carried out at 101.32 kPa.Results. The conceptual flowsheets of extractive distillation are proposed. The flowsheets consist of three (schemes I–III) or four (scheme IV) distillation columns operating at atmospheric pressure. In schemes I and II, the extractive distillation of the mixtures is carried out with tetrahydrofuran isolation occurring in the distillate stream. Further separation in the schemes differs in the order of glycerol isolation: in the third column for scheme I (traditional extractive distillation complex) or in the second column for scheme II (two-column extractive distillation complex + methanol/water separation column). Sсheme III caters to the complete dehydration of the basic ternary mixtures, followed by the extractive distillation of the azeotropic methanol–tetrahydrofuran system, also with glycerol. Sсheme IV includes a preconcentration column (for the partial removal of water) and a traditional extractive distillation complex.Conclusions. According to the criterion of least energy consumption for separation (the total load of the reboilers of distillation columns), sсheme I (a traditional complex of extractive distillation) is recommended. Additionally, the energy expended for the separation of the basic equimolar mixture using glycerol as the extractive agent was compared with that expended using another selective agent: 1,2-ethanediol. Glycerol is an effective extractive agent because it reduces energy consumption, in comparison with 1,2-ethanediol, by more than 5%.
In this paper, extractive distillation flowsheets for water–formic acid–acetic acid mixtures were designed. Flowsheets not involving preliminary dehydration were considered, and the relative volatilities of the components in the presence of sulfolane were analyzed. The result of extractive distillation depends on the amount of sulfolane. The structure of the flowsheet is determined by the results of the basic ternary mixture extractive distillation. In three-column flowsheets (schemes I, II), water is isolated in the distillate of the extractive distillation column. In the second column, distillation of the formic acid–acetic acid–sulfolane mixture is carried out, yielding formic acid (90 wt %) and acetic acid (80 wt %). The recycled flow is returned to the first column. Dilution of the formic acid–acetic acid–sulfolane mixture with sulfolane (second column of flowsheet II) allows for acids of higher quality (main substance content equal to or more than 98.5 wt %) to be obtained. Flowsheet III includes four columns and two recycling stages. First, the water–formic acid mixture is isolated in the distillate of the extractive distillation column. Then, water and formic acid are separated in a two-column complex by extractive distillation, also with sulfolane. We were carrying out calculations for column working pressure 101.32 and 13.33 kPa. To prevent thermal decomposition of sulfolane, working pressure for regeneration columns was always 13.33 kPa. The extractive distillation column of the basic three-component mixture is the main factor contributing to the total energy consumption for separation (in all schemes).
Variants of the extractive distillation of chloroform - methanol - tetrahydrofuran equimolar mixture with industrial separating agents are considered. The basic system shows opposite deviations from the ideal behavior, because it contains binary azeotropes with minimum and maximum boiling points (3.3.1-4 system according to Serafimov’s classification). The choice of selective substances for extractive distillation was carried out taking into account the concentration dependences of the excess molar Gibbs energy of the binary constituents of the derivative system “chloroform - methanol - tetrahydrofuran - industrial test agent (ethylene glycol (EG), dimethyl sulfoxide (DMSO), N-methylpyrrolidone (N-MP))” at 101.32 kPa. Based on the results of the evaluation of the thermodynamic criterion, DMSO and N-MP are recommended. Both agents show selective effect when separating two binary constituents. EG is selective only with respect to chloroform-tetrahydrofuran mixture. Since the tested agents show different selective effects, the final agent choice determines the qualitative composition of the product flows in the column for the extractive distillation of the three-component mixture (the first column of the flowsheet) and, accordingly, the structure of the total flowsheet. The schemes consist of two two-column complexes for extractive distillation (for the basic three-component mixture and for the binary mixture). The maximum contribution to the total reboiler energy consumption of the distillation columns is made by the first extractive distillation column: 65% (EG), 53% (N-MP) and 24% (DMSO). The use of the most selective agent reduces the energy consumption of this column: the reboiler load is maximal in the case of EG, in comparison with which the load is 47% lower in the case of N-MP and 76% lower in the case of DMSO.