2 September 2020 in IEEE Access
This paper considers the inspection by contact of long arrays of pipe structures in hard-to-reach places, typical of chemical plants or oil and gas industries, presenting the design of a hybrid rolling-aerial platform capable of landing and moving along the pipes without wasting energy in the propellers during the inspection. The presented robot overcomes the limitation in terms of operation time and positioning accuracy in the application of flying robots to industrial inspection and maintenance tasks. The robot consists of a hexarotor platform integrating a rolling base with velocity and direction control, and a 5-DOF (degree of freedom) robotic arm supported by a 1-DOF linear guide system that facilitates the deployment of the arm in the array of pipes to inspect their contour once the platform has landed. Given a set of points to be inspected in different arrays of pipes, the path of the multirotor and the rolling platform is planned with a hybrid RRT* (Rapidly-exploring Random Tree) based algorithm that minimizes the energy consumption. The performance of the system is evaluated in an illustrative outdoor scenario with two arrays of pipes, using a laser tracking system to measure the position of the robot from the ground control station.
31 May 2025 in Journal of Intelligent & Robotic Systems
Overhead power lines are critical infrastructures to ensure a reliable energy supply, and failures in the grid can lead to significant service disruptions. Locating these faults quickly is crucial but often challenging, especially in hard-to-reach areas such as mountainous regions. This paper presents an integrated solution for the long-range visual inspection of overhead power lines in minimum time using teams of Unmanned Aerial Vehicles (UAVs). The solution, designed for effective field operation while meeting end-user requirements, comprises route planning, autonomous execution, and monitoring of the inspection mission. Concerning route planning, a capacitated min-max multi-depot vehicle routing problem has been formulated to compute feasible routes that cover the entire grid in minimum mission time. The method can be applied to heterogeneous multi-UAV teams in terms of inspection speed and battery consumption, which helps maximise the utilisation of available robots. Moreover, the planning method is complemented by an accurate battery-consumption model based on energy principles that captures the effect of parameters often overlooked such as UAV mass, inspection speed, and weather conditions. The model has shown estimates with relative errors not exceeding 1.34% compared to real measurements. The proposed solution has been experimentally validated under real-world conditions, enabling the autonomous multi-UAV inspection of more than 10 kilometres of real power lines in 13 minutes, which represents a time reduction of up to 67.21% compared to the state of the art. The resulting videos enabled the identification of a simulated power outage and its exact location.
8 July 2025 in IEEE Transactions on Field Robotics
This paper shows how different types of novel aerial robots with new functionalities can cooperate in the inspection and maintenance (I&M) of power lines, one of the largest and most essential civil infrastructures in any country. This study relies on the results from the AERIAL-CORE research and innovation project. The paper describes an I&M validation scenario and evaluation metrics for three linked operation domains: 1) long-range inspection for the detection of possible damages on power lines in a post-storm scenario, 2) aerial manipulation for the installation of devices on power lines, and 3) aerial co-working to help human operators in their activities at height. It presents the demonstration of ten different aerial robots in a real scenario with 10 km of power lines. The platforms include morphing-wing and VTOL (vertical take-off and landing) UAVs (unmanned aerial vehicles), multi-rotors, and aerial manipulators. These platforms, custom-developed or commercially available, are evaluated in the three application domains, describing the new functionalities implemented for each case. The paper ends with guidelines, design principles, and lessons learned for future developments derived from the final demonstration of the project.
31 July 2023 in IEEE Access
This paper addresses the problem of task assignment and trajectory generation for installing bird diverters using a fleet of multi-rotors. The proposed solution extend our previous motion planner to compute feasible and constrained trajectories, considering payload capacity limitations and recharging constraints. Signal Temporal Logic (STL) specifications are employed to encode the mission objectives and temporal requirements. Additionally, an event-based replanning strategy is introduced to handle unforeseen failures. An energy minimization term is also employed to implicitly save multi-rotor flight time during installation operations. The effectiveness and validity of the approach are demonstrated through simulations in MATLAB and Gazebo, as well as field experiments carried out in a mock-up scenario.