17 July 2018 in Japanese Journal of Applied Physics
A focusing lens for TE-polarization light based on silicon high-contrast subwavelength gratings (HCGs) with two different thicknesses is proposed. The key point in designing this structure is to obtain a total phase shift of 2π rad continuously by changing the period, duty cycle, and thickness of each grating bar simultaneously for TE polarization light. Meanwhile, a novel two-thickness method is presented to provide more suitable grating bars for the design of HCGs. The properties are numerically studied by the finite element method (FEM). The results show that the focal length is 7.2 µm, the total transmissivity is 72%, and the full-width at half-maximum (FWHM) at the focal plane is 0.8 µm at a wavelength of 1.55 µm. This structure will be potentially integrated into optical devices, such as vertical cavity surface emitting lasers (VCSELs), photodetectors, CCDs, and CMOSs. We also estimate the two-thickness method to be a trade-off between high performances and fabricating accuracy. This lens as an example provides guides for the design of one-dimensional (1D) HCGs and provides suggestions for the design of 2D or 3D HCGs.
10 July 2023 in Semiconductor Science and Technology
Accurate equivalent circuit models can assist in better analyzing the performance of photodetectors. This study proposes a modified photodiode (PD) equivalent circuit model that considers coplanar waveguide (CPW) electrodes. First, the CPW electrodes of the PD are analyzed using high-frequency structure simulation software and advanced design simulation software. Skin effect occurs inside the electrode at high frequencies, increasing the PD loss and reducing the bandwidth. Subsequently, the extraction formula for the proposed model is derived, and the proposed model is compared with two conventional CPW electrode models. The proposed model effectively eliminates the frequency-dependency issue in the parameter extraction process of previous models, thereby demonstrating its accuracy. Furthermore, simulation and experimental results validate the reliability of the proposed model. Among the entire frequency band, the proposed model has good stability and a low error rate and can achieve excellent fitting with the measured results. Compared with previous studies, the average error rate is reduced by over 10%, demonstrating a significant improvement. Finally, the influence of the skin effect and high-impedance transmission lines on PD performance is analyzed and a viable approach to improve the bandwidth of PDs is proposed. The proposed model provides a viable approach to model and optimize CPW structures and is significant for the design of high-performance PDs.
6 November 2019 in Optical Engineering
Two planar dielectric reflectors with polarization-independent focusing ability have been designed. They are designed and compared on the base of the square lattice of circular two-dimensional (2-D) subwavelength gratings (SWGs) and the hexagonal lattice of circular 2-D SWGs on a silicon-on-insulator wafer.