1 December 2015 in Latin American Journal of Solids and Structures
This paper introduces a method to identify damages in beam-like structures by analyzing the natural frequency changes of the first six transversal vibration modes. A correlation between the damage location and frequency change is established for each mode separately, by considering the modal strain energy stored in that location. The mathematical relation describing this correlation is used to characterize the dynamic behavior of a beam with a damage of known position and to derive its Damage Location Indicator (DLI) as a six-term vector. The method consists in comparing the vectors describing the damage at any possible location along the beam with the Damage Signature (DS), which is achieved from the measurements that compare the beam's frequencies in healthy and damaged state. A modified Kullback-Leibler Divergence is used to assess the damage location. In order to permit early damage assessment, an improved frequency evaluation algorithm was developed. It is based on signal truncation and consequent spectral lines rearrangement, in order to accurately find the strongest spectral components. The effectiveness of the proposed method is demonstrated by simulations and experiments.
15 December 2015 in Strojniški vestnik - Journal of Mechanical Engineering
9 July 2015 in Journal of Physics: Conference Series
Transversal cracks in structures affect their stiffness as well as the natural frequency values. This paper presents a research performed to find the way how frequencies of sandwich beams change by the occurrence of damage. The influence of the locally stored energy, for ten transverse vibration modes, on the frequency shifts is derived from a study regarding the effect of stiffness decrease, realized by means of the finite element analysis. The relation between the local value of the bending moment and the frequency drop is exemplified by a concrete case. It is demonstrated that a reference curve representing the damage severity exists whence any frequency shift is derivable in respect to damage depth and location. This curve is obtained, for isotropic and multi-layer beams as well, from the stored energy (i.e. stiffness decrease), and is similar to that attained using the stress intensity factor in fracture mechanics. Also, it is proved that, for a given crack, irrespective to its depth, the frequency drop ratio of any two transverse modes is similar. This permitted separating the effect of damage location from that of its severity and to define a Damage Location Indicator as a sequence of squared of the normalized mode shape curvatures.
1 October 2015 in Applied Mechanics and Materials
Accurate frequency evaluation is very important in the damage detection processes because the dynamic response is less sensitive to damage. Therefore, to be able to detect transverse cracks in early stage, it is necessary to read precisely the frequencies. In the literature are presented several methods, more or less complex and resource consuming, destined to improve the frequencies readability. In practical applications simple and fast methods for frequency evaluation are requested; the process should be adequate to be automated. The paper presents an original method for identifying the correct frequency of generated or acquired signals. The method is based on the analysis of the original signal cropped by rectangular windows in order to rearrange successively the spectral lines aiming to find the highest peak achieved in a region of interest for the frequency-amplitude pairs.