13 February 2019 in IEEE Transactions on Antennas and Propagation
24 April 2018 in IEEE Transactions on Antennas and Propagation
A novel circularly polarized (CP) complementary source antenna with end-fire radiation is proposed in Ka-band. With the existence of two antipodal notches etched at the edges of the two broad walls of an open-ended substrate integrated waveguide (SIW), two orthogonal electric field components radiated from the equivalent magnetic current and the electric currents separately can be excited simultaneously. The magnitude and phase differences between the two filed components can be controlled effectively by properly tuning the dimensions of the notches. The operating mechanism and the design procedure of the antenna are analyzed in detail. Wide -10 dB impedance and 3-dB axial ratio (AR) bandwidths of 64% and 51%, a gain varying from 3.1 to 6.4 dBic, and the symmetrical radiation pattern are obtained. In order to further increase the gain and front to back ratio (FTBR) of the antenna, a dielectric rod structure is then integrated with the antenna. An overlapped operating bandwidth of 41%, an improved gain up to 12 dBic and the stable radiation pattern with an FTBR close to 20 dB are verified by a fabricated prototype. The antenna presented in this paper provides a new mean to design the wideband end-fire CP antenna with a simple configuration, which would be attractive for future millimeter-wave wireless systems.
20 October 2020 in IEEE Transactions on Antennas and Propagation
A millimeter-wave low-profile wideband magnetoelectric (ME) monopole antenna with the vertically polarized end-fire radiation is presented by combining a pair of the top-loaded electric monopoles with a thin open-ended substrate integrated waveguide (SIW) with the extended lower broad wall. The antenna has a profile of 0.19 wavelength at the center frequency of the operating band, a wide bandwidth of 60.7% (from 23.5 to 44 GHz) covering all the fifth-generation (5G) millimeter-wave bands in the Ka-band, a stable gain of around 7 dBi, and a tilted radiation pattern. Then a 1 W 8 ME-monopole array is designed to investigate the beam scanning properties and the effects of the metallic ground and the polycarbonate radome, which should be considered in practical applications. As a sample, a 1 W 8 array fed by an SIW feed network, assembled on a metallic ground plane and covered by a polycarbonate radome is finally designed, fabricated and measured. The prototype achieves promising radiation features with a gain up to 15.3 dBi. Owing to the compact low-profile structure with good performance, the proposed design would be valuable to the millimeter-wave applications.
6 November 2019 in IEEE Transactions on Antennas and Propagation
A novel millimeter-wave aperture-coupled magnetoelectric (ME) dipole antenna with a low-profile metallic geometry is proposed based on the three-dimensional (3D) printing technology. An impedance bandwidth of 53.7%, a gain up to 10.8 dBi, and stable unidirectional radiation patterns with the cross polarization of less than -38 dB are achieved by the antenna. Its operating mechanism and design process are studied in detail as well. In order to widen the bandwidth of the millimeter-wave full-corporate H-plane air-filled waveguide feed network, a wideband H-plane stepped waveguide T-junction with a compact size is then investigated, which has a bandwidth of about 50% for the reflection coefficient of less than -20 dB. By combining the presented radiating element with the feed network, an 8 X 8 ME-dipole array is designed, printed and tested in the Ka-band. An enhanced bandwidth of 31%, symmetric radiation patterns with the cross polarization of less than -35 dB, and a gain varying from 25.5 to 28.5 dBi are obtained experimentally. The proposed design demonstrates the advantage of utilizing the 3D printing method to improve the operating characteristics of the millimeter-wave antenna array and is attractive for the emerging wideband millimeter-wave wireless applications.
13 December 2021 in IEEE Transactions on Vehicular Technology
A three-dimensional (3D) printed Luneburg lens with nearly isotropic properties is presented. The cubical-lattice-type and the rod-type gradient-index materials are employed together to construct the novel printable spherical lens geometry, whose nearly isotropic properties improve the antenna radiation characteristics significantly. The dual-polarized radiation beam generated by the lens antenna can steer in a wide angular range with stable performance throughout a wide operating band. A prototype with an equivalent radius of 16.8 mm is printed and measured in the Ka-band. An impedance bandwidth of more than 40% for |S 11 | of less than −17.5 dB, a gain of up to 21.3 dBi, and promising radiation patterns with the dual polarization scanning in an angular range of ±60° are obtained experimentally. With the advantages of satisfying operating performance and ease of realization, the lens investigated in this paper would be an attractive candidate for the wireless applications in millimeter-wave vehicular networks.
10 January 2019 in IEEE Antennas and Wireless Propagation Letters
A novel reconfigurable leaky-wave antenna (LWA) with fixed-frequency beam-steering property is presented. The proposed antenna is designed on a substrate-integrated waveguide (SIW) whose effective width can be electronically changed. There are two rows of vias designed on each side of the SIW, and the vias in the outer rows are directly connected to the ground plane and top wall of the waveguide, but the vias in the inner rows are connected to the ground plane and top wall through p-i-n diodes that work as binary switches. By setting the states of the switches in a coding way, the effective width of the SIW can be changed numerically. Then, the propagation constant and the beam direction of the LWA can be altered accordingly. A prototype of the proposed antenna is fabricated and measured to verify the design procedures. The measured results show that the main beam direction can be steered from 46° to 68° in a step of 7° at the operating frequency of 5.2 GHz, which confirms the effectiveness and practicability of this design.