8 January 2019 in Journal of Geophysical Research: Solid Earth
Gas hydrates can form more or less at the same time as seafloor sediment. They can have the effect of significantly stiffening and strengthening deep‐ocean sediments. Subsequent increases in situ temperature or decreases in pressure may trigger hydrate dissociation, leading to large reductions in the strength and stiffness of the sediment and possible seafloor instability. Gas hydrate dissociation not only removes cementing. It also releases freshwater and significant amounts of trapped gas that are dependent on multiple factors such as type of sediment, available pore space, hydrate morphology, and hydrate saturation. The presence of pock marks in areas of known seabed instability suggests that hydrate dissociation may have been a factor in triggering failure at these locations. Having reviewed the mechanisms by which the strength and stiffness of seabed sediment may be changed during dissociation, this paper reports the results of laboratory testing to evaluate the effects of loss of hydrate cement on strength and stiffness, for a range of sand‐sized materials with differing particle size, specific surface area, and particle shape, using a laboratory gas hydrate triaxial apparatus. The results suggest that both the strength and the stiffness of hydrate‐cemented granular materials are affected significantly by the specific surface available for hydrate cementation and, to a certain extent, by the particle shape. Uniform coarse granular sediments of lower specific surface area can suffer significant loss of stiffness and strength upon hydrate dissociation, changing the sediment from dilative to contractive. Finer‐grained sediments appear less affected by dissociation.
1 July 2010 in Géotechnique
By using the bender and extender elements tests, together with measurements of the travel times of shear (S) and primary (P) waves, the variation of Poisson ratio (ν) was determined for dry sands with respect to changes in relative densities and effective confining pressures (σ3). The tests were performed for three different ranges of particle sizes. The magnitude of the Poisson ratio decreases invariably with an increase in both the relative density and the effective confining pressure. The effect of the confining pressure on the Poisson ratio was found to become relatively more significant for fine-grained sand as compared with the coarse-grained sand. For a given material, at a particular value of σ3, the magnitude of the Poisson ratio decreases, almost in a linear fashion, with an increase in the value of maximum shear modulus (Gmax). The two widely used correlations in literature, providing the relationships among Gmax, void ratio (e) and effective confining pressure (σ3), applicable for angular granular materials, were found to compare reasonably well with the present experimental data for the fine- and medium-grained sands. However, for the coarse-grained sand, these correlations tend to overestimate the values of Gmax.
14 November 2018 in Geochemistry, Geophysics, Geosystems
A better understanding of the effect of methane hydrate morphology and saturation on elastic wave velocity of hydrate‐bearing sediments is needed for improved seafloor hydrate resource and geohazard assessment. We conducted X‐ray synchrotron time‐lapse 4‐D imaging of methane hydrate evolution in Leighton Buzzard sand and compared the results to analogous hydrate formation and dissociation experiments in Berea sandstone, on which we measured ultrasonic P and S wave velocities and electrical resistivity. The imaging experiment showed that initially hydrate envelops gas bubbles and methane escapes from these bubbles via rupture of hydrate shells, leading to smaller bubbles. This process leads to a transition from pore‐floating to pore‐bridging hydrate morphology. Finally, pore‐bridging hydrate coalesces with that from adjacent pores creating an interpore hydrate framework that interlocks the sand grains. We also observed isolated pockets of gas within hydrate. We observed distinct changes in gradient of P and S wave velocities increase with hydrate saturation. Informed by a theoretical model of idealized hydrate morphology and its influence on elastic wave velocity, we were able to link velocity changes to hydrate morphology progression from initial pore‐floating, then pore‐bridging, to an interpore hydrate framework. The latter observation is the first evidence of this type of hydrate morphology and its measurable effect on velocity. We found anomalously low S wave velocity compared to the effective medium model, probably caused by the presence of a water film between hydrate and mineral grains.
31 May 2018 in Journal of Geophysical Research: Solid Earth
Methane hydrate saturation estimates from remote geophysical data and borehole logs are needed to assess the role of hydrates in climate change, continental slope stability, and energy resource potential. Here we present laboratory hydrate formation/dissociation experiments in which we determined the methane hydrate content independently from pore pressure and temperature and from electrical resistivity. Using these laboratory experiments, we demonstrate that hydrate formation does not take up all the methane gas or water even if the system is under two phase water‐hydrate stability conditions and gas is well distributed in the sample. The experiment started with methane gas and water saturations of 16.5% and 83.5%, respectively; during the experiment, hydrate saturation proceeded up to 26% along with 12% gas and 62% water remaining in the system. The coexistence of hydrate and gas is one possible explanation for discrepancies between estimates of hydrate saturation from electrical and acoustic methods. We suggest that an important mechanism for this coexistence is the formation of a hydrate film enveloping methane gas bubbles, trapping the remaining gas inside.
1 October 2015 in Soils and Foundations
1 July 2010 in Soil Dynamics and Earthquake Engineering