In the study of power electronics topology, the existing graph structure description methods cannot comprehensively manifest properties of topologies, leading to difficulties in their equivalence judgment. To address this issue, this article proposes a novel power electronics topology description method based on the fusion of graph and number theory. First, prime number weights are assigned to represent physical properties, such as components and connections. Then, the fundamental theorem of arithmetic and bijection functions are used to map the topology into a unique, concise, and reversible graph form with physical properties. Therefore, power electronics topology equivalence judgment can be conducted straightforwardly based on graph isomorphism. The proposed method effectively simplifies physical topology descriptions and related equivalence judgment. Case studies demonstrate the proposed method's effectiveness.
9 July 2024 in IEEE Transactions on Power Electronics
This article proposes an optimization method to maximize the transmission efficiency of multireceiver wireless power transfer (WPT) system while satisfying the load voltage output at the receivers. This method takes the duty cycle of the full bridge inverter at the transmitter and the boost ratio of the dc–dc converters as optimization variables. First, based on the consideration of rectifier circuits and dc–dc converters, a circuit analysis is conducted on the multireceiver WPT system, and the calculation formula for load voltage and system transmission efficiency is obtained. Second, the problem is transformed into an optimization problem with conditional constraints, and a two-stage optimization algorithm combining genetic algorithm and interior point method is designed to ensure the achievement of a stable global optimal solution. Finally, the study determines the duty cycle of the inverter and the receiver voltage boost ratio that satisfy specified constraints when maximizing efficiency. Validation of the output voltage and transmission efficiency across a wide voltage range and under various load conditions is performed on a physical platform.
24 January 2025 in IEEE Transactions on Power Electronics
This article introduces a receiver position identification (RPI) method based on sensing intermediate (SI) coils in a 3-D orthogonal wireless power transfer (WPT) system. The proposed method involves the placement of SI coils in the same plane as the transmitting (TX) coils, facilitating precise calculation of the spatial position information of the receiver (RX) coil in 3-D space. The currents of the TX coils and the SI coils are measured, and a genetic algorithm is employed to determine the RX position using the multiaxis rotational mutual inductance ratio calculation model developed in this article. Furthermore, the working modes of the SI coils can be adjusted to achieve power enhancement after completing the position detection process. Experimental results demonstrate that the proposed method achieves an average angular error of only 2.71$^{\circ }$ for RPI. In addition, the utilization of the SI coils leads to a substantial increase in transmission power, accompanied by a modest improvement in transmission efficiency.