The conventional method of measuring a multi-hole probe is based on Bernoulli’s equation and suffers from certain model errors. A computational fluid dynamics-based method was used in this study to reduce the theoretical error and establish a parametric model of the surface pressure of a spherical multi-hole pressure probe for measuring compressible flow fields at supersonic velocities. A flow field inversion method based on the parametric model is proposed herein. Numerical simulations were conducted to validate the proposed method. The experiment results show that in the compressible atmospheric flow field within Mach 1.2–1.7, the measurement errors of the inversion method were 1.3% and 2.35% for velocity and angle, respectively, thus verifying the feasibility of the method. Thus, a new method of measuring multi-hole pressure probe atmospheric flow fields was demonstrated.
16 December 2021 in Measurement Science and Technology
As a sensor of a flow field detection system, a 7-hole probe can detect the flow field velocity and retrieve three-dimensional (3D) information of the flow field. Owing to its simple structure and strong environmental adaptability, it is particularly important to calibrate it when it is widely used in turbine machinery, aerospace, and other fields. To detect the 3D flow field in the middle atmosphere, a novel calibration method based on the potential flow theory is designed using a hemispherical 7-hole probe. The hemispherical 7-hole probe was numerically calibrated through numerical simulation, and the coefficients of the calibration equation are provided. In comparison with the traditional 7-hole probe calibration method, the calibration process is significantly shortened while maintaining good measurement accuracy. The velocity error was less than 5% and the angle error was approximately 0.5°.