The extensive use of the pump as a turbine (PAT) for micro-hydropower applications has a significant value from economic and technical viewpoints. However, the unavailability of the characteristics curve and relatively lower efficiency are the two basic limitations when considering pumps for power-generating applications. In this paper, the performance of the PAT is analyzed using the computational fluid dynamics (CFD) software called Ansys CFX in conjunction with standard -. Then, experiments were done to verify the results of the simulation. Measurement inaccuracy effects are also taken into account. The initial performance of the PAT is refined by controlling basic design parameters (i.e., increasing the number of impeller blades, decreasing blade thickness, blade tip rounding, and adjusting blade inlet angle). Additionally, a new modification method known as blade grooving is also introduced in this research. Finally, all listed modification techniques are applied simultaneously to achieve maximum performance. The output of the study confirms that the adopted modification techniques have a positive effect on performance improvement. When the number of impellers is increased, the power output is enhanced by 5.72%, and blade grooving provides the most efficiency improvement, i.e., 7.00%. But decreasing blade thickness has no remarkable impact on the performance; the power output and efficiency are improved by 1.24% and 2.60%, respectively. The maximum performance improvement was achieved when the modification techniques are applied simultaneously with 10.56 and 10.20 percent of power and efficiency increments, respectively. From the entire study, it can be concluded that the chosen design parameters have an important effect on stabilizing the internal flow, decreasing the required head, decreasing the hydraulic loss in the impeller, and increasing the overall performance. The study also helps to figure out which modification technique is the most practical.
The solar chimney is an innovation, which has been as of now demonstrated of being able to create electrical vitality from the sun likewise it has been introduced in different structures for ventilation, and next to no is thought about their genuine presentation and very panics are the application. This research work deals with the development of a physical, mathematical and computational models of roof solar chimney to rationalize the performance of ventilate in residential house. A thermal model enables to easily determine the inclination angle, absorber area, cavity width of the chimney and the air flow rate, using MATLAB. The simulation has been done for selected residential house of 264m3 located at Bahir Dar city, Ethiopia @ 11° latitude and 37° longitude. At comfort air speed (2m/s), a south faced system being tilted at an angle of 45° will have absorber length, the absorber height and cavity width about 3m, 4.24m, and 0.5m respectively. This will enable the residential house to circulate the air 560kg per hour. The maximum air temperature obtained at chimney outlet is 44.5°C. For a month of April an average solar intensity value is 900 W/m2. The main factor to induce buoyancy is solar insolation since it directly influences the air temperature, and the efficiency is about 44.4%.
A techno-economic assessment of a small-scale biogas-based trigeneration system (CCHP) with thermoelectric generator (TEGs) waste-heat recovery for a decentralized dairy farm application was conducted. In the economic analysis, all the revenue streams, such as electricity, thermal energy, digestate fertilizer, and carbon credits, have been considered. In this study, economic calculation models are built in MATLAB with a 15% discount rate and a 20-year project duration. The net present value, internal rate of return, payback period, and levelized cost of electricity are all used to show economic performance in a sort of clear way. The work looks at three scenarios: Energy Only, Energy plus Fertilizer, and Energy plus Fertilizer plus Carbon. The result demonstrated that the system needs a capital investment of 37,000 USD and achieves a positive net present value (NPV) of 18,892 USD, an IRR of more than 27%, a payback period of less than 3.6 years, and LCOE is 0.038 USD/kWh in scenario 3. In comparison to the energy-only scenario, digestate valorization and carbon credits increase net present value (NPV) by 167% and shorten the payback period by 1.3 years. According to break-even calculations, the system needs to run for only 5,800 hours a year to recoup the expenditure, which is less than the base-case estimate of 7,000 hours. The results show that the economic viability of small-scale biogas CCHP systems for decentralized dairy farm applications can be significantly improved by incorporating TEGs to recover waste heat and monetizing digestate fertilizer and carbon credits.