The long-term (>18 months) protection of Ni surfaces against oxidation under atmospheric conditions is demonstrated by coverage with single-layer graphene, formed by chemical vapor deposition. In situ, depth-resolved X-ray photoelectron spectroscopy of various graphene-coated transition metals reveals that a strong graphene–metal interaction is of key importance in achieving this long-term protection. This strong interaction prevents the rapid intercalation of oxidizing species at the graphene–metal interface and thus suppresses oxidation of the substrate surface. Furthermore, the ability of the substrate to locally form a passivating oxide close to defects or damaged regions in the graphene overlayer is critical in plugging these defects and preventing oxidation from proceeding through the bulk of the substrate. We thus provide a clear rationale for understanding the extent to which two-dimensional materials can protect different substrates and highlight the key implications for applications of these materials as barrier layers to prevent oxidation.
We systematically dope monolayer graphene with different concentrations of nitric acid over a range of temperatures, and analyze the variation of sheet resistance after vacuum annealing up to 300 °C. The optimized HNO3 doping conditions yield sheet resistances as low as 180 Ω sq.−1, which is significantly more stable under vacuum annealing than previously reported values. Raman and photoemission spectroscopy suggest that this stable graphene doping occurs by a bi-modal mechanism. Under mild conditions the dopants are weakly bonded to graphene, but at high acid temperatures and concentrations, the doping is higher and more stable upon post-doping annealing, without causing significant lattice damage. This work shows that large, stable hole concentrations can be induced by transfer doping in graphene.
We dope graphene by evaporation of MoO3 or by solution-deposition of I2 and assess the doping stability for its use as transparent electrodes. Electrical measurements show that both dopants increase the graphene sheet conductivity and find that MoO3-doped graphene is significantly more stable during thermal cycling. Raman spectroscopy finds that neither dopant creates defects in the graphene lattice. In-situ photoemission determines the minimum necessary thickness of MoO3 for full graphene doping.
We grow ultra-high mass density carbon nanotube forests at 450 °C on Ti-coated Cu supports using Co-Mo co-catalyst. X-ray photoelectron spectroscopy shows Mo strongly interacts with Ti and Co, suppressing both aggregation and lifting off of Co particles and, thus, promoting the root growth mechanism. The forests average a height of 0.38 μm and a mass density of 1.6 g cm−3. This mass density is the highest reported so far, even at higher temperatures or on insulators. The forests and Cu supports show ohmic conductivity (lowest resistance ∼22 kΩ), suggesting Co-Mo is useful for applications requiring forest growth on conductors.
We demonstrate the growth of continuous monolayer graphene films with millimeter-sized domains on Cu foils under intrinsically safe, atmospheric pressure growth conditions, suitable for application in roll-to-roll reactors. Previous attempts to grow large domains in graphene have been limited to isolated graphene single crystals rather than as part of an industrially useable continuous film. With both appropriate pre-treatment of the Cu and optimization of the CH4 supply, we show that it is possible to grow continuous films of monolayer graphene with millimeter scale domains within 80 min by chemical vapour deposition. The films are grown under industrially safe conditions, i.e., the flammable gases (H2 and CH4) are diluted to well below their lower explosive limit. The high quality, spatial uniformity, and low density of domain boundaries are demonstrated by charge carrier mobility measurements, scanning electron microscope, electron diffraction study, and Raman mapping. The hole mobility reaches as high as ~5,700 cm2 V−1 s−1 in ambient conditions. The growth process of such high-quality graphene with a low H2 concentration and short growth times widens the possibility of industrial mass production.
We study the metal-catalyst-free growth of uniform and continuous graphene on different insulating substrates by microwave plasma-enhanced chemical vapor deposition (PECVD) with a gas mixture of C 2 H 2 , NH 3 , and H 2 at a temperature of 700–750 °C.