1 January 2016 in AIP Conference Proceedings
The problem of the measurement of clay loam materials in plastic consistency is more or less difficult as they can change the shape during the long time measurements. The specimen thickness is expected as the constant during all the experiment measured by transient pulse method. In a case of plastic clay loam, it can change the form during the measurement because of the squeeze of the material even under the gravity condition. Thus the specimen surface wall should be reinforced by special dimensionally well-defined thin wall container. In this paper the special container in a form of thin tube rings bounded by central annular ring was constructed and used for the measurements. The heat source was inserted into the tube rings through the nozzle in the middle part and the thermocouple was inserted through the drilled openings at defined distance from the heat source. System clamped the heat source together with the rings at desired distance from the thermocouple. This distance represents the thickness of tested specimen. The soft plastic material fill the inner space of tube rings in such a way to fulfill the geometry conditions for this method. The need of soft clay loam material measurement is to test its thermal properties because of the interest to use it as the heat storage material below the buildings. The measured clay loam containing some moisture has quite high values of specific heat and thus the use of it as the heat storage material is promising.
18 July 2018 in AIP Conference Proceedings
The In the frame of extending the renewable energy systems, the use of the shallow geological bedrock below the houses is used for the seasonal heat storage purposes. Thus, the knowledge of the thermophysical properties of the soft clay loam materials present in the bedrock is important. On the basis of the known thermal diffusivity, thermal conductivity and specific heat of the materials around the energetic needle, one can calculate the time dependency of the heat dissipated and transferred into the surrounding. This allows calculating the temperature maps that can specify in more detail the heat penetration depth during the seasonal storage and pumping out of the heat accumulated during the year seasons. The aim is to optimize the efficiency of the system. The clay loams in the free nature contain high level of the moisture and thus have high values of specific heat. The pulse transient method was used to get the thermophysical parameters of these materials. Specimens were drilled out from the bedrock at depths 50, 150 and 250cm from the surface. The measured values of equilibrium sorption moisture show that obtained materials are very different. In the paper we show the possible influence of the redistribution of water content during the shooting of the heat pulse. The water redistribution deforms the temperature response. This effect was avoided by lowering the heat pulse power to minimal values that still allows the evaluation of the measurement.