Existing studies reporting current limiting control strategies for grid-forming inverters primarily focus on grid-forming inverters that use a multi-loop control structure. This study reports a current limiting control for grid-forming inverters that uses a single-loop control structure. The proposed current limiting control was implemented at the pulse width modulation (PWM) control layer to guarantee a rapid response. Once an overcurrent caused by severe faults is detected, the proposed control strategy immediately blocks relevant insulated-gate bipolar transistors (IGBTs) using a hysteresis loop, ensuring that the overcurrent is limited within a few PWM cycles. After the fault is cleared, the inverter seamlessly transfers back to droop control mode to maintain stability. The current limiting control has been tested in a microgrid environment operating in the OPAL-RT platform. Study results show that the control strategy can effectively limit the overcurrent under both balanced and unbalanced faults and can maintain system transient stability after the fault is cleared.
In this paper, robust control strategies are explored to solve the problem of rendezvous maneuver for rigid spacecraft exposed to the external disturbance, actuator faults and unknown inertial parameters. To pursue the control objective, two adaptive controllers are constructed via the sliding mode control (SMC) technology. Firstly, a basic control scheme is designed in the event of unknown inertial parameters and external disturbance, where the Minimum-learning-parameter (MLP) algorithm is adopted for approximating the unknown system dynamics. Though effective, the basic controller is not applicable in the actuator fault scenarios. Considering this drawback, adaptive laws are designed in the second controller to tackling the actuator faults. It is illustrated that the proposed controllers will endow tracking errors with asymptotic stability and strong robustness to actuator faults. Finally, the effectiveness of the control strategies is verified by numerical simulations.