Hang Lin

Hang Lin

Auto-generated profile, based on publicly available information

Hang Lin

School of Electronics and Information Engineering, Sichuan University, Chengdu, China

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 March 2022 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
Changjun LIUChangjun LIU
Changjun LIU
HLHang Lin
Hang Lin
ZHZhongqi He
Zhongqi He
ZCZhizhang (David) Chen
Zhizhang (David) Chen
In microwave wireless power receivers, impedance matching networks can maximize power transmission from RF to dc. However, they require circuit components and physical space to implement. To circumvent the problem, we present two compact patch rectennas that do not require matching networks. They comprise a patch antenna and rectifying Schottky diodes which are mounted on the ground plane and connected to the patch antenna through metallic vias. The positions of the vias are chosen in such a way that the input impedance of the antenna and that of the rectifying units are conjugately matched. The two rectenna types are all fabricated and tested: one with one rectifying unit and the other with double rectifying units, respectively. Measurements show that the rectenna with the single rectifying unit has the peak RF-dc conversion efficiency of 77% at 2.45 GHz and the dynamic power range (>60%) is 10 dB. The rectenna with the double rectifying units has the peak conversion efficiency of 74.14% at 2.45 GHz and the dynamic power range (>60%) is 10 dB. Both rectennas are good candidates for integrated microwave wireless power receivers due to the removal of the impedance matching networks and the suppression of harmonic components.

26 October 2020 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
ZHZhongqi He
Zhongqi He
HLHang Lin
Hang Lin
Changjun LIUChangjun LIU
Changjun LIU
In this letter, a compact Class-C rectifier with high efficiency based on a novel structure was proposed for wireless power transmission (WPT). This structure is connected to the rectifying diode in parallel. It presents infinite impedance at the output port at the fundamental frequency for impedance matching and zero impedance at the high harmonic frequencies. An open-end 12th wavelength microstrip line and a short-end quarter wavelength microstrip line are applied in this design. For fabricated, a radio frequency (RF) rectifier operating at 2.45 GHz was designed and tested. The measurement results show that the maximum RF-dc conversion efficiency is 82.7% at 25 dBm. Moreover, the proposed rectifier is compact with the size of 0.35λg x 0.13λg.

12 July 2022 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
HHHaoming He
Haoming He
HLHang Lin
Hang Lin
PWPengde Wu
Pengde Wu
QLQi Li
Qi Li
Changjun LIUChangjun LIU
Changjun LIU
In this brief, a compact high-efficiency broadband rectifier with an extended range of input power is proposed for the applications in wireless energy harvesting (EH). In the rectifier, a coupled transmission line is connected in series with a Schottky diode to compensate its capacitive reactance, compress its impedance variation when the frequency or input power varies. The coupled transmission line facilitates the impedance matching circuit and reduces the insertion loss. High RF-dc conversion efficiency will be achieved consequently. A rectifier is fabricated and measured based on analysis and simulation on the coupled transmission line. The measured results show a good agreement with the simulation results. The rectification efficiency of the rectifier is over 70 % from 1.6 to 2.8 GHz (a bandwidth of 54.5%) with the input power range from 11 to 14 dBm. The efficiency remains above 50% from 1.5 to 2.85 GHz with input power from 5 to 18 dBm,and over 40% within 1.7–2.8 GHz when the input power decreases to 0 dBm. The maximum measured efficiency is 78.63% at an input power of 16 dBm.

26 October 2020 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
ZHZhongqi He
Zhongqi He
HLHang Lin
Hang Lin
Huacheng ZhuHuacheng Zhu
Huacheng Zhu
Changjun LIUChangjun LIU
Changjun LIU
In this letter, a compact high-efficiency radio frequency (RF) rectifier based on a series harmonic suppression structure is proposed for wireless power transmission (WPT). The proposed structure removes the cascading bandpass between the RF source and the diode, and the dc-pass filter between the diode and the dc load, simultaneously. The harmonic suppression structure consists only of a short-ended eighth-wavelength microstrip line, which shows an inductive impedance to compensate the rectifying diode's capacitive impedance at fundamental frequency and changes to open circuit to reflect the second harmonic for rectifying again. Two Schottky diodes are used in this design for voltage-doubling rectifying. For fabrication, a rectifier operating at 2.45 GHz was designed, fabricated, and tested. The measurement results show that the maximum RF-dc conversion efficiency is over 80% at 25 dBm. Meanwhile, the fabricated rectifying is compact with 20 mm x 5 mm.

14 July 2022 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
ZDZongyang Dan
Zongyang Dan
ZHZhongqi He
Zhongqi He
HLHang Lin
Hang Lin
Changjun LIUChangjun LIU
Changjun LIU
A new compact patch rectenna is presented in this letter. It consists of a rectangular patch antenna, a Schottky diode, and a harmonic filter with impedance matching to improve the rectifying efficiency. The filter is realized by a series short-ended one-eighth-wavelength microstrip transmission line, which also balances the capacitive impedance of the diode. The impedances of the diode and patch antenna are matched well by tuning the patch antenna and short-ended transmission line. A meander line is used to build a dc output path. For validation, a rectenna working at 2.45 GHz is designed, manufactured, and measured. A maximum rectifying efficiency of 82.2% is realized when the dc load is 400 Ω at an input power of 22.5 dBm. The proposed patch rectenna has potential applications such as rectenna arrays in wireless power transmission.

26 August 2020 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
ZHZhongqi He
Zhongqi He
HLHang Lin
Hang Lin
Changjun LIUChangjun LIU
Changjun LIU
In this letter, we proposed a simple design method of rectenna for dual-band wireless power transmission (WPT). This method introduces a co-design of a Schottky's diode and antenna's impedance at 2.45 GHz and 5.8 GHz, which are conjugate matching, respectively. One example shows the design. The rectifying diode presents capacitive impedance, and inductive impedance can be given by a loop antenna through optimization. A Schottky diode is directly connected into the dual-band antenna. An uncomplicated structure is achieved without additional matching network and filtering. For validation, a rectenna working at 2.45 GHz and 5.8 GHz was designed, fabricated, and tested. The measurement results show that a maximum conversion efficiency of 70% with a load resistance of 400 was realized at 2.45 GHz. At 5.8 GHz, the peak efficiency is 61.5% with a load resistance of 200. This rectenna can be used to charge electronic devices, such as wireless sensors.