In polyolefins, long-chain branching is introduced through an energy-intensive, high-pressure radical process to form low-density polyethylene (LDPE). In the current work, we demonstrated a ladder-like polyethylene architecture through solution polymerization of ethylene and less than 1 mole % of α,ω-dienes, using a dual-chain catalyst. The ladder-branching mechanism requires catalysts with two growing polymer chains on the same metal center, thus enchaining the diene without the requirement of a steady-state concentration of pendant vinyl groups. Molecular weight distributions lacking a high–molecular weight tail, distinctive Mark-Houwink signatures, nuclear magnetic resonance characterization, and shear and extensional rheology consistent with highly branched polyethylene architectures are described. This approach represents an industrially viable solution-polymerization process capable of producing controlled long-chain branched polyethylene with rheological properties comparable to those of LDPE or its blends with linear low-density polyethylene (LLDPE).
Chewing gum provides an excellent everyday example of viscoelastic behavior, and understanding its rheological properties is important for application purposes. Here, we compare the rheological behavior of selected commercial chewing gums and bubble gums. Small amplitude oscillatory shear, shear creep, and steady shear demonstrated that both chewing and bubble gums behave like power-law critical gels in the linear regime. Nonlinear viscoelastic behavior was investigated using large amplitude oscillatory shear, shear creep, and start-up flows (in shear and uniaxial extension). Bubble gums showed more pronounced strain hardening and greater stresses to break in start-up of steady uniaxial extension than chewing gums. We argue that this combination of rheological signatures is sufficient to provide a new robust definition of chewing gum that is independent of specific molecular composition. There are potentially many different formulations and design routes that can achieve this distinctive rheological fingerprint.
We derive and demonstrate how analytical solutions for strain-controlled medium-amplitude oscillatory shear (MAOS) can be coupled with a continuous distribution of relaxation times. This applies generally to the vast library of existing MAOS models, including those that are not time-strain separable. The theoretical results are important for improved certainty in model parameters, since their number can be reduced dramatically compared to a discrete distribution of relaxation times. We exemplify this continuous spectrum MAOS approach by modeling experimental data for a transient network formed from an aqueous semidilute unentangled solution of poly(vinyl alcohol) and sodium tetraborate (Borax). The full frequency-dependent MAOS signatures are fit well by only five parameters: three linear parameters for a log-normal spectral distribution and two nonlinear parameters for the strength of the nonlinearity and its cutoff time scale. Remarkably, longer modes (τ>τw) are not activated in the asymptotically nonlinear regime. Although this may be compatible with the possible mechanisms for the shear nonlinearities, the reason for the hard cutoff of time scales is currently unknown. Our results also suggest that the sign change location for the third-harmonic viscous nonlinearity may be sensitive to large-scale structural features (such as molar mass distribution or long-chain branching) that control the polydispersity of terminal relaxation times.