17 October 2012 in IEEE Transactions on Magnetics
A new method for magnetic field generation is presented that enhances the reliability of fiber-based interferometric switches. Suitable switching technologies have been proposed and implemented, but magneto-optic (MO) materials have shown promise in realizing all-optical switching with reasonable power, loss, and switching speed. However, bottlenecks in field generation drivers have limited the performance of MO devices in fiber-based switches. Improving the design of the field generation system will enhance this technology, ultimately realizing practical and reliable solutions. Conventional drivers in MO switching devices utilize one coil with a low number of turns to quickly magnetize the MO material. This, in effect, leads to a fast optical rise time. However, the optical fall time is determined by the response of the MO material and the decay rate of any trapped magnetic energy in the coil, which can be sluggish. The proposed design achieves fast optical fall time by better controlling the demagnetization of the MO material. In this paper, the design of the magnetic field generation system is presented and compared to other recently proposed systems, the electrical system is characterized, and the reliability of the optical output is investigated.
13 November 2017 in Scientific Reports
Diode-pumped solid-state micro lasers are compact (centimetre-scale), highly stable, and efficient. Previously, we reported Q-switched lasers incorporating rare-earth substituted iron garnet (RIG) film. Here, the first demonstration of the magnetooptical (MO) Q-switch in an Nd:YAG laser cavity is performed. We fabricate a quasi-continuous-wave (QCW) diode-pumped Nd:YAG laser cavity, which is shortened to 10 mm in length and which contains an RIG film and a pair of small coils. This cavity yields a 1,064.58-nm-wavelength pulse with 25-ns duration and 1.1-kW peak power at a 1-kHz repetition ratio. Further, the polarisation state is random, due to the isotropic crystal structure of Nd:YAG and the fact that the MO Q-switch incorporating the RIG film does not require the presence of polarisers in the cavity. This is also the first report of an MO Q-switch producing random polarisation.
12 March 2012 in Journal of Applied Physics
A new fiber-based, magneto-optic switch is proposed with a novel approach for low power and efficient operation. The switch, with reasonable switching speed compared to competitive designs, operates at considerably reduced power levels, which makes it a practical deployable solution. The basic switch setup consists of a Faraday rotator in a Sagnac fiber-optic interferometer in which optical switching is controlled by an electronic driving circuit. The electronic system generates a magnetic field through the Faraday rotator by driving current through a specially designed two-coil system. The new coil system allows for sufficient field generation at low quiescent power levels while maintaining very short optical rise and fall times. The design and considerations as well as the effect of mutual inductance between the two coils and its influence on switching times are investigated. The optical system consists of a Sagnac interferometer with a Faraday rotator within the Sagnac loop. Appropriate phase shift for interference is achieved by the proposed field generating system designed for the magneto-optical element. The theory of operation, design, experimental results, and optical and electronic setup are presented and analyzed.
21 April 2015 in Journal of Applied Physics
This paper describes the design procedures and underlying concepts of a novel High Current Magnetic Field Generator (HCMFG) with adjustable pulse width for transcranial magnetic stimulation applications. This is achieved by utilizing two different switching devices, the MOSFET and insulated gate bipolar transistor (IGBT). Results indicate that currents as high as ±1200 A can be generated with inputs of +/−20 V. Special attention to tradeoffs between field generators utilizing IGBT circuits (HCMFG1) and MOSFET circuits (HCMFG2) was considered. The theory of operation, design, experimental results, and electronic setup are presented and analyzed.
15 July 2013 in IEEE Transactions on Magnetics
In optical communications, magneto-optic switching technologies are emerging alternatives, as well as complimentary solutions to their electro-optic counterpart. Their main attractions include low-power and low-cost solutions for signal routing used in fiber-based and all-optical circuits needed in fast dynamic communications systems. However, design of the magnetic field generator system required for these devices is a challenge that has limited their performance and integration onto silicon-based technologies. In this work, a novel approach to designing magnetic field generators for magneto-optic switching systems is provided. This practical field generation design method for magneto-optical interferometers highlights important trade-offs specific to different needs and applications. Example usage of this design process is provided in the application of a magneto-optic switch of ring resonator configuration. Optical and electrical results are also provided and discussed.