Compressed hydrogen fuel tanks were used for on-board hydrogen-fuelled vehicles which operate under high pressure and are subject to potential failures associated with pressure vessels. During a failure, hydrogen spills out through the cracks developed in these vessels. Organic materials are used to shield the leakage but mostly it fails due to improper surface and deposition of constituents of coating on the substrate. So in order to eliminate this potential threat a new approach was developed using polyurea coating as protective layer. It is very reactive and cures fast even at low temperature. In this investigation the polyurea coating was characterised using Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction. In addition to this, nuclear magnetic resonance was done on its binding components to confirm FTIR spectral results.
The major task before us is to increase the performance of solar stills. Researchers have done many modifications to enhance the productivity of solar stills. In this article, the authors have attempted to improve the performance of solar stills. Instead of a conventional solar still, a double-slope single-basin solar still was fabricated. It was internally modified by spreading pebbles at the bottom. External modification was attempted by fitting an external mirror. Internal modification enhanced the production marginally. Significant improvement in production was witnessed when both internal and external modifications were attempted. The performance of the double-slope single-basin solar still with internal and external modifications was 40.86% higher than that of the solar still without any modification.