Renat R. Gabdulkhakov

Renat R. Gabdulkhakov

Auto-generated profile, based on publicly available information

Renat R. Gabdulkhakov

Empress Catherine II Saint Petersburg Mining University

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
KSKsenia I. Smyshlyaeva
Ksenia I. Smyshlyaeva
Viacheslav A. RudkoViacheslav A. Rudko
Viacheslav A. Rudko
VPVladimir G. Povarov
Vladimir G. Povarov
ASAlina A. Shaidulina
Alina A. Shaidulina
Ignatii EfimovIgnatii Efimov
Ignatii Efimov
JSJames Speight
James Speight
The effects of asphaltenes from two heavy oil residues on the sedimentation stability of residual marine fuels were assessed and compared. As base components of residual marine fuels, the vacuum residue (VacRes) and visbreaking residue (VisRes) were taken. The heptane-insoluble fractions (HI-fractions), including asphaltenes, isolated from vacuum residue and visbreaking residue, were analyzed to determine the elemental composition (XRF) and cluster parameters (XRD). The results of the analysis of the parameters of the asphaltene cluster (HI-fraction) for vacuum residue and visbreaking residue showed that dγ – 6.1 and 5.9 Å, Lc – 26.72 and 20.78 Å, and La – 7.68 and 7.20 Å. The sedimentation stability of residual marine fuel was determined according to the ISO 10307-1-2009 (TSA) method and described using ternary phase diagrams. The ratio of stable compositions to the total number of possible compositions (with a step of 10 wt%) was 65/66 or 98.5% for residual marine fuel comprising a mixture VacRes/ULSD/LCGO (vacuum residue/ultra-low sulphur diesel/light catalytic gas oil). Meanwhile, the ratio of stable compositions to the total number of possible compositions was 38/66 or 57.6% for residual marine fuel comprising a mixture VisRes/ULSD/LCGO (visbreaking residue/ultra-low sulphur diesel/light catalytic gas oil).

25 February 2020 in Journal of Mining Institute
Verified
Journal Article
Open access
PDF file
НКН. К. Кондрашева
Н. К. Кондрашева
Viacheslav A. RudkoViacheslav A. Rudko
Viacheslav A. Rudko
MNM.Y. Nazarenko
M.Y. Nazarenko
RGR. Gabdulkhakov
R. Gabdulkhakov
Paper studies the effect of excess pressure during delayed coking of asphalt, obtained by propane deasphaltization of tar, on yield and physical and chemical properties of hydrocarbon fuels' components and solid-phase product – petroleum coke. Asphalt was coked at a temperature of 500 °C and excess pressure of 0.15-0.35 MPa in a laboratory unit for delayed coking of periodic action. Physical and chemical properties of raw materials and components of light (gasoline), medium (light gasoil), and heavy (heavy gasoil) distillates obtained during experimental study were determined: density, viscosity, coking ability, sulfur content, iodine number, pour points, flash points, fluidity loss and fractional composition. Quantitative group hydrocarbon and microelement compositions and properties of obtained samples of petroleum coke (humidity, ash content, volatiles' yield, sulfur content, etc.) were also studied. Comparative assessment of their quality is given in accordance with requirements of GOST 22898-78 “Low-sulfur petroleum coke. Specifications”. In addition, patterns of changes in excess coking pressure on yield and quality indicators of distillate products and petroleum coke were revealed. With an increase in excess pressure of coking process from 0.15 to 0.35 MPa, content of paraffin-naphthenic hydrocarbons in light and heavy gasoils of delayed coking decreases. Common pattern in asphalt coking is an increase in yield of coke and hydrocarbon gas with an increase in excess pressure from 0.15 to 0.35 MPa.

22 December 2022 in CIS Iron and Steel Review
Verified
Journal Article
Closed access
ANA. I. Nasifullina
A. I. Nasifullina
MSM. K. Starkov
M. K. Starkov
RGR. R. Gabdulkhakov
R. R. Gabdulkhakov
Viacheslav A. RudkoViacheslav A. Rudko
Viacheslav A. Rudko
Petroleum coke is a potential partial replacement of coking coals (being in short supply) in manufacture of metallurgical coke; in Russia and other CIS countries it was entitled as petroleum coking additive (PCA), petroleum coke with output of volatile substances within the range 15-25 %. The second part of the work describes the results of conducted experimental researches in the field of manufacture of petroleum coke additive on the example of use of two kinds of sulfuric petroleum residues of “KINEF” JSC as raw materials: residue of atmospheric distillation and mixture of residues of vacuum distillation and visbreaking. The research was conducted for two temperature procedures within the ranges 455-465 and 475-485 °С. Eight samples of carbon material were obtained as a result of conversion, and influence of input parameters of the coking process on composition and physical-chemical properties of obtained carbon materials was established. Based on content of volatile substances in petroleum coke additive and its group chemical composition, which was determined via extraction method (content of α-, β- and γ-fractions) and via infrared Fourier spectroscopy, assessment and ranging of the eight obtained PCA samples were carried out by their sintering susceptibility. Interpretation of infrared spectra of obtained PCA samples was conducted via comparison with infrared spectra of coking coal, which have identical absorption stripes. Relation between PCA sintering ability and procedure parameters of the coking process was revealed. It was determined that technological process occurring at the less coking temperature 455-465 °С provides high quality PCA forming, otherwise the procedure with higher temperature (475-485 °С). This work was carried out as part of the State Assignment 0792-2020-0010 “Development of scientific foundations of innovative technologies for processing heavy hydrocarbon raw materials into environmentally friendly motor fuels and new carbon materials with controlled macro- and microstructural organization of mesophase”.

30 October 2020 in Tsvetnye Metally
Verified
Journal Article
Closed access
KLKirishi Kinef Llc
Kirishi Kinef Llc
AKA. V. Kameshkov
A. V. Kameshkov
NKN. K. Kondrasheva
N. K. Kondrasheva
RGR. R. Gabdulkhakov
R. R. Gabdulkhakov
Viacheslav A. RudkoViacheslav A. Rudko
Viacheslav A. Rudko
Coke producers often face a shortage of valuable grades of coals, i.e. coking coals. This paper examines the possibility to obtain a coking additive by applying delayed coking to various types of heavy petroleum residues. The paper also gives a comparative description. Five types of heavy petroleum residue from the KINEF oil refinery were used in the experiments that aimed to produce carbon material. They included vacuum residue ELOU-AVT-6, vacuum residue S-1000 resultant from the hydrocracking process, visbreaker bottoms from the S-3000 unit, and two mixtures of the ELOU-AVT-6 unit products: a mixture of vacuum residue and third vacuum cut; and a mixture of vacuum residue, third vacuum cut and atmospheric residue. The carbon material obtained from all the above types of raw materials was analyzed for quality; an X-ray diffraction analysis was carried out; and the interplanar spacings d002 and d110 were calculated, as well as the linear sizes of Lc and La crystallites. The coking additive obtained instead of the typical petroleum coke was found to meet the specification. Thus, the volatile matter content in it is within the range from 15 to 25 wt%. This additive can be used in steel production instead of coking coal. The coking additive from a mixture of vacuum residue, third vacuum cut and atmospheric residue has the highest content of volatile matter (19.30%), while the coking additive from the visbreaking residue from the S-3000 has the lowest volatile matter content (16.15%). The latter is due to the fact that the primary petroleum material was subjected to light thermal cracking. It is shown that as the composition of the heavy petroleum residue changes, so do the properties of the resultant coking additive: a higher fraction of the low-boiling components in the feedstock is associated with a higher volatile matter content; the carbon materials produced from vacuum residue have a higher microhardness; the coking product produced from the visbreaker bottoms has a lower porosity compared with the product obtained from the vacuum residue. This research was carried out as part of a governmental assignment of the Ministry of Education and Science of the Russian Federation in the framework of the following research project: 0792-2020-0010 “Fundamentals of innovative processing techniques to obtain environmentally-friendly motor fuels and innovative carbon materials with variable macro- and microstructure of the mesophase from heavy hydrocarbon materials”. The research was carried out at the laboratory of the Shared Knowledge Centre of the Saint Petersburg Mining University.

1 January 2025 in International Journal of Engineering
Verified
Journal Article
Open access
PDF file
RGR. R. Gabdulkhakov
R. R. Gabdulkhakov
ASA. R. Samigullin
A. R. Samigullin
AHA. Hafizi
A. Hafizi
Viacheslav A. RudkoViacheslav A. Rudko
Viacheslav A. Rudko
IPI. N. Pyagay
I. N. Pyagay
The composition and physicochemical properties of the delayed coking feed have a decisive influence on the qualitative characteristics of the resulting needle coke, which is formed both at the stage of liquid-phase thermolysis and at the stage of high-temperature calcination. In this paper, the effect of modification of hydrocarbon feedstock with polymeric mesogen additive on high-temperature calcination of needle coke in the temperature range of 600-1600 °С was studied. Changes in the structure formation of needle coke during high-temperature calcination as a function of feedstock modification and calcination temperature were determined by SEM, XRD, CHN, XRF and Raman spectroscopy, as well as by methods of complex study of physicochemical properties. At lower calcination temperatures (1200°C), needle coke from modified feedstock achieves a higher degree of carbonization compared to needle coke from unmodified feedstock (1400°C), which reduces the heat load on the calcining furnace while maintaining the quality of the resulting needle coke for the production of premium grades of graphite electrodes. Modification of needle coke raw material with polystyrene and calcination of the resulting raw needle coke at 1200°C provided the resulting electrodes electrical resistivity 7.1 (µΩ⋅m) and СTE20-520 = 0.897 * 10-6 K-1.

1 December 2025 in International Journal of Coal Preparation and Utilization
Verified
Journal Article
Closed access
TUTatiana Utenkova
Tatiana Utenkova
RGRenat Gabdulkhakov
Renat Gabdulkhakov
ACAnastasia Chebykina
Anastasia Chebykina