14 August 2018 in IEEE Transactions on Smart Grid
Malicious attacks in the power system can eventually result in a large-scale cascade failure if not attended on time. These attacks, which are traditionally classified into physical and cyber attacks, can be avoided by using the latest and advanced detection mechanisms. However, a new threat called cyber-physical attacks which jointly target both the physical and cyber layers of the system to interfere the operations of the power grid is more malicious as compared with the traditional attacks. In this paper, we propose a new cyber-physical attack strategy where the transmission line is first physically disconnected, and then the line-outage event is masked, such that the control center is misled into detecting as an obvious line outage at a different position in the local area of the power system. Therefore, the topology information in the control center is interfered by our attack. We also propose a novel procedure for selecting vulnerable lines, and analyze the observability of our proposed framework. Our proposed method can effectively and continuously deceive the control center into detecting fake line-outage positions, and thereby increase the chance of cascade failure because the attention is given to the fake outage. The simulation results validate the efficiency of our proposed attack strategy.
12 August 2015 in IEEE Transactions on Systems, Man, and Cybernetics: Systems
The use of nuclear energy to generate electric power is crucial to meet the high energy demand of a modern economy. In newly constructed nuclear power plants (NPPs), the trend among control systems is to replace the obsolete analog hard-wired systems with the contemporary digital and cyber-based systems. Therefore, cyberphysical security as well as dependability are critical issues in safety critical NPPs. In this paper, we present different levels/layers of protection to manage cyber/physical security. We also discuss the interrelationship between cyber and physical attacks. We adopt generalized stochastic Petri nets to quantitatively evaluate the intrusion probability. We then propose a new cyberframework and show that the proposed framework not only prevents cyberattacks but also conforms to cybersecurity regulations. We also propose a physical framework to prevent potential physical attacks. Finally, we discuss dependability through three metrics, i.e., reliability, maintainability, and availability. A case study is presented to demonstrate that the proposed cyberframework is highly dependable through analyzing steady-state probabilities.
20 July 2018 in IEEE Transactions on Services Computing
Fog computing, evolves from the cloud and migrates the computing to the edge, is a promising solution to meet the increasing demand for ultra-low latency services in wireless networks. Via the forward-looking perspective, we advocate a Fog Radio Access Network (F-RAN) model, which leverages the existing infrastructure such as small cells with limited computing power, to achieve the ultra-low latency by joint edge computing and near-range communications across multiple Fog groups. We formulate the low latency design as an NP-hard optimization problem, which demonstrates the tradeoff between communication and computing in the time domain. Due to each F-RAN node's potential as each user's master F-RAN node with 1) different self computing power; and 2) different cooperative power of assisted F-RAN nodes, we first tackle globally optimized master F-RAN node selection for each user and propose a latency-driven cooperative Fog algorithm with dynamic programming solution for simultaneous selection of the F-RAN nodes to serve proper heterogeneous Fog resource allocation for multi-Fog groups. Considering the limited heterogeneous Fog resources shared among all users, we propose the one-for-all strategy for every user putting him/herself into others' shoes and reaching a “win-win” outcome. The numerical results show that the low latency services can be accomplished by F-RAN via latency-driven Fog cooperation approach.
29 December 2016 in IEEE Transactions on Communications
Massive multiple-input multiple-output (massive MIMO) has been studied to improve the throughput in cellular communication systems via spatial degrees of freedom and array gain. However, in massive MIMO systems, due to the hardware cost considerations, it is infeasible to install a radio frequency (RF) chain for each antenna. To deploy massive MIMO within reasonable hardware cost, hybrid precoding is proposed in which the signal is processed by a low-dimensional digital baseband precoder and a high-dimensional analog RF precoder. On the other hand, cooperative transmission is another way to enhance system throughput, in which base stations (BSs) can jointly transmit to a user. In this paper, we first investigate the hybrid precoder design for cooperative multiuser massive MIMO systems. We propose hybrid precoding algorithms for two performance metrics: weighted sum rate and max-min fairness. We also propose a low complexity user pairing for both precoder designs. Numerical results show that the proposed hybrid precoding algorithms outperform existing hybrid precoding algorithms for non-cooperative transmissions, and perform closely compared with existing digital precoding algorithms for cooperative transmissions, when the number of users does not exceed the total number of RF chains of the BSs in cooperative (i.e., the largest possible channel rank). In summary, this paper provides a hybrid precoder design guideline for existing and developing cellular communication systems, including Long Term Evolution-Advanced and the fifth generation cellular systems.
19 February 2020 in IEEE Transactions on Emerging Topics in Computational Intelligence
Profits can be made from a trading strategy where long or short positions are placed in advance, based on the ability to forecast a future stock price or index, such as the closing or opening price. In addition to predicting stock index values, a prediction of the sign for the difference between closing and opening prices is important in order to earn a profit. This article presents an approach based on a Recurrent Neural Network (RNN) to forecast the opening price, the closing price, and the difference between them. Compared to previously reported approaches that were based on machine learning, the method proposed here emphasizes the pre-processing of the data, including the normalized first order difference method, as well as the focusing on the characteristics of the stock data, such as the zero-crossing rate (ZCR), which denotes the ratio of changes in the sign within a specific time interval. We propose a decision-making approach that is based on an estimate of both the ZCR and the cross-validation data so as to enhance the ability to forecast the difference between the opening and closing prices. We apply our technique to the S&P500 (Standard & Poor's 500) and the Dow Jones stock indices. As indicated by the results, our method can achieve a better performance compared to previous work.
20 May 2016 in IEEE Systems Journal
We propose a channel state information acquisition mechanism to reduce the training overhead in frequency-division duplexing (FDD) massive multiple-input multiple-output (MIMO) downlink (DL). While the massive MIMO has demonstrated the great potentials in many aspects, the carrier multiplexing designs in massive MIMO mostly adopt time-division duplexing (TDD) system, which stems from a stereotype that the uplink/DL channel reciprocity only holds for TDD. On the other hand, FDD massive MIMO is generally considered infeasible due to the unaffordable temporal overhead for sending training symbols at base station. Our proposed FDD with reverse training (FDD-RT) modifies the DL band training procedure in typical FDD system to reduce pilot overhead, where the DL band channel reciprocity is exploited in FDD-RT. FDD-RT contributes to providing a feasible and relatively low complexity method to implement massive MIMO in FDD system. Without FDD-RT, communication operators who currently use FDD system may be enforced to change to TDD system in the future to accommodate massive MIMO, where the cost is prohibitive. The most different property of FDD-RT from other solutions is that its training overhead does not scale with the number of antennas at base station. The detail analysis/comparison of FDD-RT will be given in this paper.