Yuri Pasenko

Yuri Pasenko

Auto-generated profile, based on publicly available information

Yuri Pasenko


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2023 in Automobile Roads and Road Construction
Verified
Journal Article
Closed access
NUNational Transport University
National Transport University
VMVolodymyr Musiiko
Volodymyr Musiiko
AKAndrii Borysovych Koval
Andrii Borysovych Koval
YLYuri Lazaruk
Yuri Lazaruk
MAMilitary Unit A4629
Military Unit A4629
YPYuri Pasenko
Yuri Pasenko
This article addresses the creation and optimization of designs for Universal Continuous-Action Earthmoving Machines (UCAEM) capable of excavating extensive trenches of various widths, depths, and shapes without structural changes to the operating equipment. The paper provides a detailed rationale for the relevance and practical feasibility of developing continuous-action universal earthmoving machines. Analytically, the required trajectory of movement for the soil excavation operating element of UCAEM in the process of constructing wide trenches (excavations) in the soil is determined. This trajectory resembles a Bernoulli lemniscate, along which the operating element of UCAEM moves to excavate the soil in evenly thick planar chips. This enables the construction of trenches in the soil with maximum work productivity, minimizing external loads on the earthmoving machine's operating element. To implement the above, a physical model of the rotary operating equipment of UCAEM was created, and experimental studies were conducted. The design of the UCAEM operating element movement drive is based on a two-circuit lever mechanism with fifth-class rotary pairs, providing the delivery of the soil-excavating operating element to the soil face. Soil excavation is carried out in the mode of fan-linear feed of the operating element to the face. The movement of the operating element in the face is performed by a lever mechanism with three degrees of freedom, each link of the mechanism is provided with an individual turning drive using a pair of hydraulic cylinders relative to the hinge of its attachment. An algorithm for the operation of the drive for the movement to the face of the two-circuit soil-excavating rotary operating equipment of continuous-action UCAEM has been synthesized, providing soil excavation with chips of uniform thickness in plan, regardless of the width of the trench, and consequently, increasing the productivity of the machine's operation. Equalization of the chip thickness in plan is achieved by turning the intermediate frame of the operating element at the end of each half-cycle of the working process. An algorithm for the movement of the operating element during the construction of entry and exit ramps during the construction of trenches in the soil over several passes of the operating element has been justified.

1 January 2024 in Automobile Roads and Road Construction
Verified
Journal Article
Closed access
YVYevhen Vysokovych
Yevhen Vysokovych
AKAndrii Borysovych Koval
Andrii Borysovych Koval
YPYuri Pasenko
Yuri Pasenko
VRVitaliy Ragulin
Vitaliy Ragulin
OTOleksandr Topol
Oleksandr Topol
Summary. This paper addresses the optimization of the structural parameters of the lifting mechanism of the frame for the working equipment in a universal rotary earthmoving trenching and excavation machine operating continuously. The goal is to reduce the efforts in its hydraulic cylinders while maintaining the prescribed kinematics of the mechanism. Structurally, the lifting mechanisms of the working equipment are designed with the hydraulic cylinder positioned above the boom (frame), and the fluid is supplied to the rod chamber of the hydraulic cylinder for lifting. The formulated optimization task aims to design a mechanism that could reach initial and final positions while simultaneously developing minimal peak effort on the hydraulic cylinder rod. Known as a "minimax" problem, this task seeks the minimum value among a set of maximums. Variables chosen include the linear distances from the axis of rotation to the hydraulic cylinder attachment points and the structural angle; a target function is defined. Computational dependencies for determining the design parameters and the force on the hydraulic cylinder rod are presented. Additionally, a constraint on the range of values for the structural angle parameter has been introduced. For calculations, a spreadsheet processor MS Excel with the "Solver" add-on was used. As a result of the optimization for the physical model of the working equipment of the universal rotary earthmoving trenching and excavation machine operating continuously, the parameters for the positioning of the hydraulic cylinder attachment points were found to reduce the load on the hydraulic cylinders by 1.39 times while maintaining the prescribed kinematics of the mechanism. The proposed methodology can be recommended for use in calculations of other lifting mechanisms where the cylinder is positioned above the boom and the fluid is supplied to the rod chamber of the hydraulic cylinder. Keywords: hydraulic cylinder, earthmoving machine, force, working equipment, force calculation, software, link-lever mechanism

1 January 2025 in Automobile Roads and Road Construction
Verified
Journal Article
Closed access
VMVolodymyr Musiiko
Volodymyr Musiiko
AKAndrii Borysovych Koval
Andrii Borysovych Koval
VNVolodymyr Nikolaienko
Volodymyr Nikolaienko
YPYuri Pasenko
Yuri Pasenko
MDMaksym Dubinin
Maksym Dubinin
Summary. The article addresses the issue of ensuring stable operating conditions for continuousoperation earthmoving machines and other specialized machinery when subjected to lateral forces in the contact zone between the tracked undercarriage and the supporting surface. Such a situation is highly likely, particularly when earthmoving machines operate on uneven or complex terrain. Additionally, trenching and excavation machines working in a fan-like reciprocating motion mode also experience lateral force effects. The comprehensive challenge of preventing earthmoving machines from slipping due to lateral forces, whether on horizontal surfaces or slopes, requires an initial analytical solution. Slippage in machines operating in a turning mode can be eliminated by preventing the less-loaded track from slipping during movement. This study presents a computational model and derives dependencies for determining the longitudinal and lateral forces acting on the tracked undercarriage, as well as the resistance moment to turning, which causes a shift in the turning pole of the track chain resting on the ground. It is shown that to determine the permissible value of the lateral force that prevents sideward displacement of the tracks, it is necessary to establish an acceptable combination of longitudinal and lateral forces acting on the undercarriage, along with the corresponding resistance moment to turning. The potential rotation of the lower track branch during machine slippage occurs around a turning center that does not coincide with the track’s support surface center. The kinematics of track movement during machine slippage are analyzed, and the forces acting on the track in this scenario are determined. Calculations confirm the dependence of the force interaction characteristics between the tracked undercarriage and the supporting surface on the changing coordinates of the machine’s turning center. Keywords: earthmoving machine, soil, slope, lateral force, slippage, turning center, support surface center, track, variation coefficient