Cathode precursors of lithium-NMC 811 were synthesized by the coprecipitation method using two different nickel sources, namely mixed nickel–cobalt hydroxide precipitate (MHP) and nickel sulfate. The characteristics of the synthesized precursors were compared with the characteristics of the commercial NMC 811 cathode precursor obtained from the international market. The XRD analyses identified that the diffraction peaks of the three precursor materials were in close agreement to that of Li0.05Ni0.75Co0.1Mn0.1O2, with the figure(s) of merit (FoM) of 0.81, 0.88, and 0.9, respectively, for the synthesized precursor that used MHP as the source of nickel (SM-LNMCO-811), nickel sulfate as the source of nickel (SX-LNMCO-811), and the commercial precursor (K-NMC-811). The elemental analysis of the synthesized precursors revealed the Ni:Mn:Co mol ratios of 0.8:0.08:0.12 and 0.76:0.11:0.13 for SM-LNMCO-811 and SX-LNMCO-811, respectively. The SEM analysis revealed that SX-LNMCO-811 and K-NMC-811 showed a similar particle morphology with a spherical shape; the SM-LNMCO-811 exhibited an irregular particle morphology. The particle size analysis showed that SM-LNMCO-811 had the largest average particle size (285.2 μm) while K-NMC-811 and SX-LNMCO-811 samples had almost the same average values (i.e., 18.28 and 17.16 µm, respectively). The results of the charge–discharge measurement of the fabricated battery cylindrical cells with SM-LNMCO-811, SX-LNMCO-811, and K-NMC-811 as cathode materials showed the best discharge value of the SX-LNMCO-811 sample at 178.93 mAh/g with an initial efficiency of 94.32%, which is in line with the electrochemical impedance measurement results that showed the largest ion conductivity and lithium ion diffusion coefficient value of the SX-LNMCO-811 sample that utilized the synthesized nickel sulfate as the source of the nickel.
In the present study, precipitation of nickel and cobalt as mixed hydroxide precipitate (MHP) from pregnant leach solution of nickel limonite ore from Soroako after iron removal stage was carried out. A series of MHP precipitation experiments was conducted by using MgO slurry as neutralizing agent and the effects of pH, temperature, duration of precipitation and the addition of MHP seed on the precipitation behavior of nickel, cobalt, as well as iron and manganese was studied. Characterization of MHP product was performed by particle size analyzer (PSA) as well as X-Ray Fluorescence (XRF), X-Ray Diffractometer (XRD) and Scanning Electron Microscope (SEM) analyses. Kinetics analysis was made by using differential-integral method for the rate of homogenous reaction. Precipitation at pH 7, temperature 50°C for 30 minute, without seed addition resulted in nickel and cobalt recoveries of 82.8% and 92%, respectively with co-precipitated iron and manganese of 70% and 24.2%, respectively. The seed addition increases nickel and cobalt precipitations significantly to 99.9% and 99.1%, respectively. However, the addition of seed into led to a significant increase of manganese co-precipitation from 24.2% without seed addition to 39.5% at the addition of 1 g seed per 200 mL of PLS. Kinetics analysis revealed that Ni precipitation to form MHP follows the second-order reaction kinetics with activation energy of 94.6 kJ/mol.