1 October 2026 in Optical Engineering
Space-borne telescopes in gravitational wave observatories impose an unprecedented requirement on backscattered light suppression, typically below 10−10 of the incident laser power. Conventional beam splitter-based measurement systems face an inherent limitation from substrate volume scattering inside the splitter, which generates a noise floor far higher than the detection requirement by several orders of magnitude. Although the desired signal is coaxial backscattered light re-entering the interferometric path, overwhelming parasitic bulk scattering from the beam splitter masks this weak signal and prevents direct coaxial measurement. To overcome this barrier, we propose a backscatter measurement technique based on partial field of view (PFOV) spatial filtering. The method employs a centrally-apertured mirror to achieve physical separation of the incident and scattered light paths, and measures the off-axis near-axis field of view backscattered light as a proxy for the inaccessible on-axis central field of view component—a substitution necessitated by the limited acceptance field of view of the detector, thereby fundamentally eliminating the dominant source of background noise inherent in beam-splitter-based architectures. In comparative measurements across four samples with distinct scattering properties, the system demonstrated a dynamic range exceeding 55 dB. The high-reflectivity mirror used to replace the M4 mirror in the space telescope has a back-scattered light power of Pdet=4.28×10−11 W, and the back-scattered light level is at the order of βPFOV=4.28×10−11. Considering a measurement uncertainty of ±9.8%, its back-scattered light level remains within the range of (3.86∼4.7)×10−11 level, which confirms that the system used in the PFOV method has a reliable detection capability at the required level of 10−10. The research results indicate that this PFOV measurement scheme effectively breaks through the noise limitation of traditional beam splitter structures. Unlike conventional methods—which are limited by splitter self-scattering (∼10−5), inability to isolate backscattering (cavity ring-down), or internal stray light (BRDF scatterometers)—the PFOV method achieves a dynamic range >55 dB and direct detection at the 10−11 level, providing a feasible and practical technical approach for high-precision characterization of backscattered light from optical elements of space-based gravitational wave telescopes on the ground.
20 January 2026 in Optics and Lasers in Engineering