We propose an active metasurface whose functionalities can be dynamically switched among linear-to-linear, linear-to-elliptical, and linear-to-circular polarization conversions in a wideband. The active metasurface is composed of butterfly-shaped unit cells embedded with voltage-controlled varactor diodes. By controlling the bias voltage of the varactor diodes, the electromagnetic responses of the proposed metasurface can be tailored, leading to reconfigurable polarization conversions. The simulation results reveal that with no bias voltage, the proposed metasurface is able to reflect linear-polarization waves to cross-polarization waves in the frequency range from 3.9 to 7.9 GHz, with a polarization conversion ratio of over 80%; however, at the bias voltage of −19 V, the metasurface is tuned to be a circular polarization converter in a wideband from 4.9 to 8.2 GHz. Moreover, two equivalent circuits along the $x$ - and $y$ -directions are developed to elucidate the tunable mechanism. The experimental results are in a good agreement with the simulation results obtained from commercial software and from the equivalent circuit model.
14 December 2020 in IEEE Antennas and Wireless Propagation Letters
A low-profile and broadband metasurface antenna is proposed for circular polarization radiation. The metasurface is an array of subwavelength square patches. The modal behaviors of the proposed metasurface are investigated by using the characteristic mode theory. Two characteristic modes with the same resonant frequencies and orthogonal current distributions are chosen as operation modes. Furthermore, a hybrid feed system consisting of a cross-slot and a microstrip line is employed to excite the two orthogonal modes having 90° phase difference to obtain circular polarization radiation. Based on these concepts, an antenna with low profile of 0 0.07 $λ_\text{0}$ (0 $λ_\text{0}$ is the free-space wavelength at operation frequency of 5.5GHz) is designed. The measurement results show that the proposed antenna has-10-dB impedance bandwidth of 4.8-6.35 GHz and 3-dB axial-ratio bandwidth of 4.85-6 GHz. Moreover, the antenna gain is 6.8-9.7 dBic in the whole axial-ratio bandwidth.
30 September 2022 in IEEE Transactions on Antennas and Propagation
An ultrathin and low-profile metalens antenna based on chain Huygens’ metasurface is proposed for 28-GHz band applications. The metasurface consists of an array series of modified dipoles etched onto a piece of dielectric substrate, and there is a half-unit dislocation along y-axis between these dipoles on top and bottom surfaces. Due to this geometry, the EM response between the pair of adjacent dislocated dipoles as a bridge links them into a whole structure, and thus the metasurface is regarded as a chain structure. The chain metasurface has the characteristics of full transmission phase coverage, stable angular performance and the subwavelength-scale EM manipulation ability (half the period of unit along y-axis, ~ 0.215λ 0 at 28 GHz, where λ 0 is the wavelength in free space). By utilizing these properties of chain Huygens’ metasurface, an ultrathin and low-profile metalens antenna operating at 28 GHz is designed with the aperture of about 15λ 0 ×15λ 0 and the smaller F/D ratio of 0.32, compared with usual metalens antenna. The measurement shows that the proposed ultrathin metalens antenna achieves excellent radiated performances including the peak gain of 30.6 dBi at 28 GHz, the antenna efficiency of 40.3%, and 3-dB gain bandwidth of 10.7%.
2 August 2022 in IEEE Antennas and Wireless Propagation Letters
A broadband circularly polarized metasurface antenna with low radar cross-section (RCS) is proposed. Four metasurface elements are arranged orthogonally in a 2×2 array and fed with a 90° phase difference to achieve circular polarization radiation. Each metasurface element is a non-uniform sub-array of 4×4 metallic patches. Attributed to the non-uniform property of the metasurface element, two characteristic modes with different resonant frequencies but with similar surface current distributions are formed. By optimizing the geometric parameters of the non-uniform element, the two modes are merged with each other, resulting in bandwidth (BW) broadening of the proposed antenna. Simulated and measured results show that the designed antenna has a −10-dB impedance BW of 49.60%, 3-dB axial ratio BW of 33.13%, and peak gain of 13.17 dBic. Moreover, the RCS reduction is higher than 6 dB in the entire operation frequency band. Additionally, the antenna has a low profile of 0.08λ (λ is the free-space wavelength at an operation frequency of 8.25 GHz).
29 December 2023 in IEEE Transactions on Antennas and Propagation
This paper introduces a chessboard metasurface comprising four orthogonally arranged elements designed to create a broadband circularly polarized (CP) antenna with ultra-wideband radar cross-section reduction (RCSR). Each element is a bilayer structure consisting of a polarization rotation surface (PRS) and a phase-controlled surface (PCS). The PCS effectively modulates the phases of co-polarized and cross-polarized reflective waves, resulting in a considerable bandwidth expansion for polarization conversion. To achieve CP radiation, the chessboard metasurface is fed sequentially with rotational input, with each output port featuring a double-V-shaped slot coupled by a fork-shaped microstrip. This feeding approach significantly suppresses scattering modes within the working band, thereby enhancing in-band RCSR. Additionally, eight micro-slots are further etched onto the ground plane to achieve a full in-band RCSR exceeding 10 dB. Simulation results demonstrate an impedance bandwidth of 54.5% (6-10.5 GHz) and a 3 dB axial ratio bandwidth of 32.9% (6.6-9.2 GHz), with a peak gain of 11.9 dBic. Besides, the antenna exhibits 10 dB out-of-band and full in-band RCSR in the ultra-wideband range from 6.6 to 22.4 GHz. Experimental results corroborate the findings of the simulations.
The CLP Publishing collects CLP journals and partnered optics and photonics journals, and provides readers an optical publishing platform with global influence. SPIE, OSA, CUP. Chinese Laser Press (CLP), established by Shanghai Institute of Optics and Fine Mechanics (SIOM), Chinese Academy of Sciences (CAS) and Chinese Optical Society (COS) in 2009, nowadays publishes eight journals and manages three online platforms.