1 October 2016 in Additive Manufacturing
1 January 2013 in International Journal of Precision Technology
Conventional approaches to achieving traceability in measurements of optical surfaces are based on a series of intercomparisons ultimately linking the measurement result to a realisation of the unit (metre) at a national measurement institution. Measurement services offered by national measurement institutes (NMIs) cover a limited size and shape range and the uncertainties associated with the transfer of a calibration must be considered when data from any testing service is used in quality assurance. Local realisation of the unit, typically using CIPM recognised wavelengths and their associated uncertainties, combined with in-situ self-calibration of geometry and the development of a rigorous uncertainty analysis meet the conditions to achieve traceability according to the requirements of ISO 17025. This paper reviews the underlying basis for achieving traceability without a direct chain of comparisons to NMIs and gives some examples using a range of optical measurements.
11 December 2008 in Applied Optics
We describe the application of a vector-based radius approach to optical bench radius measurements in the presence of imperfect stage motions. In this approach, the radius is defined using a vector equation and homogeneous transformation matrix formulism. This is in contrast to the typical technique, where the displacement between the confocal and cat’s eye null positions alone is used to determine the test optic radius. An important aspect of the vector-based radius definition is the intrinsic correction for measurement biases, such as straightness errors in the stage motion and cosine misalignment between the stage and displacement gauge axis, which lead to an artificially small radius value if the traditional approach is employed. Measurement techniques and results are provided for the stage error motions, which are then combined with the setup geometry through the analysis to determine the radius of curvature for a spherical artifact. Comparisons are shown between the new vector-based radius calculation, traditional radius computation, and a low uncertainty mechanical measurement. Additionally, the measurement uncertainty for the vector-based approach is determined using Monte Carlo simulation and compared to experimental results.