11 January 2021 in IEEE Journal of Microwaves
Ever since the deployment of the first-generation of mobile telecommunications, wireless communication technology has evolved at a dramatically fast pace over the past four decades. The upcoming fifth-generation (5G) holds a great promise in providing an ultra-fast data rate, a very low latency, and a significantly improved spectral efficiency by exploiting the millimeter-wave spectrum for the first time in mobile communication infrastructures. In the years beyond 2030, newly emerged data-hungry applications and the greatly expanded wireless network will call for the sixth-generation (6G) communication that represents a significant upgrade from the 5G network – covering almost the entire surface of the earth and the near outer space. In both the 5G and future 6G networks, millimeter-wave technologies will play an important role in accomplishing the envisioned network performance and communication tasks. In this paper, the relevant millimeter-wave enabling technologies are reviewed: they include the recent developments on the system architectures of active beamforming arrays, beamforming integrated circuits, antennas for base stations and user terminals, system measurement and calibration, and channel characterization. The requirements of each part for future 6G communications are also briefly discussed.
3 May 2018 in IEEE Transactions on Microwave Theory and Techniques
A 64-channel massive multiple-input multiple-output (MIMO) transceiver with a fully digital beamforming (DBF) architecture for fifth-generation millimeter-wave communications is presented in this paper. The DBF-based massive MIMO transceiver is operated at 28-GHz band with a 500-MHz signal bandwidth and the time division duplex mode. The antenna elements are arranged as a 2-D array, which has 16 columns (horizontal direction) and 4 rows (vertical direction) for a better beamforming resolution in the horizontal plane. To achieve half-wavelength element spacing in the horizontal direction, a new sectorial transceiver array design with a bent substrate-integrated waveguide is proposed. The measured results show that an excellent RF performance is achieved. The system performance is tested with the over-the-air technique to verify the feasibility of the proposed DBF-based massive MIMO transceiver for high data rate millimeter-wave communications. Using the beam-tracking technique and two streams of QAM-64 signals, the proposed millimeter-wave MIMO transceiver can achieve a steady 5.3-Gb/s throughput for a single user in fast mobile environments. In the multiple-user MIMO scenario, by delivering 20 noncoherent data streams to eight four-channel user terminals, it achieves a downlink peak data rate of 50.73 Gb/s with the spectral efficiency of 101.5 b/s/Hz.
28 October 2019 in IEEE Transactions on Antennas and Propagation
1 August 2018 in IEEE Transactions on Antennas and Propagation
A planar circularly polarized substrate integrated waveguide (SIW) stacked patch antenna array consisting of four sequential-rotation (SR) subarrays is presented for Ka-band applications. Antenna element is realized based on a pair of stacked cavities by the combination of a driven patch layer and a parasitic patch layer, which are formed by a shorted square patch and multiple identical stacked square patches, respectively. Each subarray consisting of two pairs of elements, excited by a coplanar waveguide (CPW) network with four metallic vias, is well matched to a novel SIW SR feeding network. A narrow transverse coupling slot, a semiopening resonant cavity, two pairs of inductive vias, and an inductive window are introduced in the SIW-based feeding network to implement functions of phase shifter, impedance matching, and power divider in the two layers. By employing the proposed SR feeding network, the CPW network, and the four subarrays, the excellent performance of the array is realized. To verify the design, a prototype is fabricated and measured, which demonstrates a -10 dB impedance bandwidth of 29.6%, a 3 dB axial ratio bandwidth of 25.4%, and a peak gain of 20.32 dBic.
1 March 2021 in IEEE Transactions on Antennas and Propagation
In this article, novel millimeter-wave (mmWave) filtennas (filtering antennas) are proposed to realize compact size and low insertion loss for 5G applications. It is achieved by employing eighth-mode substrate-integrated waveguide (EMSIW) cavities fully shielded by metallized vias and cover as resonators, which are named as fully shielded EMSIW (FSD-EMSIW) cavities. Interdigital coupling between cavities is introduced in order to obtain higher coupling strength for wideband operation. The proposed single-polarized antenna consists of a feeding stripline, two FSD-EMSIW cavities, and two stacked square patches, generating the four-order filtering antenna response. Furthermore, this design has been extended to realize a dual-polarized filtenna by employing double sets of feeding network. For demonstration, single-/dual-polarized filtenna prototypes were fabricated and measured, the measured results show that the 5G mmWave band (24.25-29.5 GHz) can be covered with average gains of 4.5 dBi. Good bandpass filtering response is also observed. Finally, to validate the proposed idea in array applications, a 16-element filtenna array is designed and measured with good performance.
26 February 2019 in IEEE Transactions on Microwave Theory and Techniques