Yudong Pu

Yudong Pu

Auto-generated profile, based on publicly available information

Yudong Pu

Laser Fusion Research Center, China Academy of Engineering Physics 1 , Mianyang 621900

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 July 2018 in Plasma Physics and Controlled Fusion
Verified
Journal Article
Closed access
PDF file
YPYudong Pu
Yudong Pu
THTianxuan Huang
Tianxuan Huang
FGFengjun Ge
Fengjun Ge
SZShiyang Zou
Shiyang Zou
FWFeng Wang
Feng Wang
YDYongkun Ding
Yongkun Ding
We present the first integrated implosion experiments which were carried out on the SG-III Laser facility in 2015. Vacuum hohlraums and squared laser pulses were used in the experiments. The purpose of the experiments was to demonstrate the one-dimensional implosion performance at low-convergence ratios. To characterize the implosion performance, the hohlraum energetics, the implosion dynamics and the nuclear products were measured. In particular, the radiation flux was diagnosed through laser entrance hole at different angles by an array of flat response detectors, and the energy and the spectrum of the back-scattered lasers were monitored for 8 laser beams which correspond to 2 beams in each cone at the lower hemisphere. Moreover, the hotspot shape was imaged using KB microscopes of high spatial resolution simultaneously from the equator and polar views. Taking advantage of the high resolution, some detailed structures in the hotspots were noticed. For the best implosion performances, the neutron yields over 1D calculation reached 50% at the convergence-ratios of 15.

15 November 2023 in Matter and Radiation at Extremes
Verified
Journal Article
Open access
PDF file
YLYang Liu
Yang Liu
DZDe-Hua Zhang
De-Hua Zhang
JXJing-Fei Xin
Jing-Fei Xin
YPYudong Pu
Yudong Pu
JLJun Li
Jun Li
JZJian Zheng
Jian Zheng
The evolution of ablative Rayleigh–Taylor instability (ARTI) induced by single-mode stationary and time-varying perturbations in heat flux is studied numerically in two dimensions. Compared with the stationary case, time-varying heat-flux perturbation mitigates ARTI growth because of the enhanced thermal smoothing induced by the wave-like traveling heat flux. A resonance is found to form when the phase velocity of the heat-flux perturbation matches the average sound speed in the ablation region. In the resonant regime, the coherent density and temperature fluctuations enhance the electron thermal conduction in the ablation region and lead to larger ablation pressure and effective acceleration, which consequently yield higher linear growth rate and saturated bubble velocity. The enhanced effective acceleration offers increased implosion velocity but can also compromise the integrity of inertial confinement fusion shells by causing faster ARTI growth.

25 July 2023 in Nuclear Fusion
Verified
Journal Article
Open access
FGFengjun Ge
Fengjun Ge
YPYudong Pu
Yudong Pu
KWKai Wang
Kai Wang
THTianxuan Huang
Tianxuan Huang
CSChuankui Sun
Chuankui Sun
YDYongkun Ding
Yongkun Ding
To achieve ignition in a laboratory via inertial confinement fusion, a spherical capsule containing a frozen layer of deuterium and tritium (DT) fuel will be imploded on an MJ-class laser facility. However, if pure deuterium fuel can be used in place of DT fuel for tuning shots, we may speed up the process of ignition experiments while maintaining the surrogacy by significantly reducing the level of radioactivity. Unfortunately, it has long been assumed that neither the approach of symmetrical infrared irradiation used in the Omega direct-drive experiments nor the method of beta-layering used in the NIF experiments can be used to smooth the D layered capsule in cylindrical hohlraums. The difficulty in smoothing the D ice layer prevents us from taking advantage of cryogenic D-layered capsules in indirect-drive experiments. In this work, we established a procedure to form a uniform D-ice layer for capsules held in cylindrical hohlraums and carried out indirect-drive cryogenic D-layered implosion experiments using a squared laser pulse on the Shenguang Laser Facility in China. The quality of the D ice layer is characterized by phase-contrast imaging. The root-mean-square of the power spectrum in modes 2–100 is about 2.2 μm. The implosion performance of the D-layered capsules is close to the prediction of one-dimensional simulations. The measured neutron yield and areal fuel density are 1.2 × 1011 and 80 mg cm−2, respectively.

10 May 2018 in Nuclear Fusion
Verified
Journal Article
Closed access
PDF file
JYJi Yan
Ji Yan
XZXing Zhang
Xing Zhang
JLJiwei Li
Jiwei Li
ZDZhensheng Dai
Zhensheng Dai
BCBolun Chen
Bolun Chen
JYJiamin Yang
Jiamin Yang
The double-shell implosion can propose a non-cryogenic target design for the ignition, and provide a robust implosion platform for inertial confinement fusion research. The hohlraum-driven double-shell implosions have been performed on ShenGuang-III laser facility. A vaccum hohlraum with a high CCR value was employed. With 96kJ laser energy in a squared temporal profile, the implosion neutron yield was close to 1010, and the YOC1D was about 27%. The fuel areal density of 14mg/cm2 was inferred from the measured yield ratio of the secondary neutrons and the primary neutrons. The implosion trajectory was diagnosed by the 4.75keV X-ray backlight. The measured implosion velocity and hot-spot X-ray emission history indicated a predictable hydrodynamic process of the double-shell implosion. The implosion symmetry and pusher-gas mix were also two crucial factors which might deteriorate the implosion performance. The loss of 4 driven laser beams in the backlight shot made the YOC1D decreased to 5% and fuel areal density decreased to 4mg/cm2. In future, optimization of the implosion symmetry and the capsule fabrication will be implemented to improve the double-shell implosion performance.

1 February 2019 in Physics of Plasmas
Verified
Journal Article
Closed access
PDF file
WJWei Jiang
Wei Jiang
JYJi Yan
Ji Yan
FGFengjun Ge
Fengjun Ge
TCTao Chen
Tao Chen
LJLongfei Jing
Longfei Jing
YDYongkun Ding
Yongkun Ding
The first implosion tuning experiment with a shaped pulse driven was performed on the SGIII laser facility by using 2D X-ray radiography. Under the careful design, we obtained the driven symmetry both in the picket and peak. The experimental results show that the P2/P0 asymmetry can be tuned by varying the fraction energy in the inner cone both in the picket and peak. The radiation symmetry at the peak is consistent with our simulation. However, the radiation symmetry in first 0.5 ns (picket) had an unexpected negative P2/P0, which is different from the simulation; it may be caused by inner cone absorption in the tent which supported the capsule.

23 November 2020 in Nuclear Fusion
Verified
Journal Article
Closed access
JYJi Yan
Ji Yan
HSHao Shen
Hao Shen
ZCZhong Jing Chen
Zhong Jing Chen
HCHui Cao
Hui Cao
CSChuan Kui Sun
Chuan Kui Sun
XHXian Tu He
Xian Tu He
The influence of low-mode-driven asymmetry on yield degradation in shaped-pulse indirect-drive implosions has been investigated at the 100 kJ laser facility. In this work, P2- and P4-driven asymmetries were tuned by varying hohlraum gas-fill density and capsule diameter. The measured neutron yield varied from 2.1 × 109 to 7.6 × 109 and the yield measured by a 1D simulation (YOC1D) was increased from 3% to 16%. Meanwhile, considering the temporal P2- and P4-driven asymmetries, the yields measured by 2D simulations (YOC2D) were from 26% to 81% (the YOC2D of the majority of the shots was higher than 50%). Furthermore, both the ion temperature and neutron bang-time showed good agreement between the measurements and the 2D simulations. The simulations demonstrated that the temporal P2- and P4-driven asymmetries can decrease the efficiency of PdV work and increase the energy loss due to electron thermal conduction. In addition, the internal energy of the deuterium (DD) fuel clearly decreased and the neutron yield was degraded by low-mode asymmetry. In a future work, we will enlarge the cylindrical hohlraum diameter or use an I-hohlraum to improve the low-mode-driven symmetry, along with measurement of the hot-spot shape.