Remoras of the ray-finned fish family Echeneidae have the remarkable ability to attach to diverse marine animals using a highly modified dorsal fin that forms an adhesive disc, which enables hitchhiking on fast-swimming hosts despite high magnitudes of fluid shear. We present the design of a biologically analogous, multimaterial biomimetic remora disc based on detailed morphological and kinematic investigations of the slender sharksucker (Echeneis naucrates). We used multimaterial three-dimensional printing techniques to fabricate the main disc structure whose stiffness spans three orders of magnitude. To incorporate structures that mimic the functionality of the remora lamellae, we fabricated carbon fiber spinules (270 μm base diameter) using laser machining techniques and attached them to soft actuator–controlled lamellae. Our biomimetic prototype can attach to different surfaces and generate considerable pull-off force—up to 340 times the weight of the disc prototype. The rigid spinules and soft material overlaying the lamellae engage with the surface when rotated, just like the discs of live remoras. The biomimetic kinematics result in significantly enhanced frictional forces across the disc on substrates of different roughness. Using our prototype, we have designed an underwater robot capable of strong adhesion and hitchhiking on a variety of surfaces (including smooth, rough, and compliant surfaces, as well as shark skin). Our results demonstrate that there is promise for the development of high-performance bioinspired robotic systems that may be used in a number of applications based on an understanding of the adhesive mechanisms used by remoras.
3 January 2021 in ACS Applied Materials & Interfaces
Shape memory polymers are gaining significant interest as one of the major constituent materials for the emerging field of 4D printing. While 3D-printed metamaterials with shape memory polymers show unique thermomechanical behaviors, their thermal transport properties have received relatively little attention. Here, we show that thermal transport in 3D-printed shape memory polymers strongly depends on the shape, solid volume fraction, and temperature and that thermal radiation plays a critical role. Our infrared thermography measurements reveal thermal transport mechanisms of shape memory polymers in varying shapes from bulk to octet-truss and Kelvin-foam microlattices with volume fractions of 4%–7% and over a temperature range of 30–130 °C. The thermal conductivity of bulk shape memory polymers increases from 0.24 to 0.31 W m−1 K−1 around the glass transition temperature, in which the primary mechanism is the phase-dependent change in thermal conduction. On the contrary, thermal radiation dominates heat transfer in microlattices and its contribution to the Kelvin-foam structure ranges from 68% to 83% and to the octet-truss structure ranges from 59% to 76% over the same temperature range. We attribute this significant role of thermal radiation to the unique combination of a high infrared emissivity and a high surface-to-volume ratio in the shape memory polymer microlattices. Our work also presents an effective medium approach to explain the experimental results and model thermal transport properties with varying shapes, volume fractions, and temperatures. These findings provide new insights into understanding thermal transport mechanisms in 4D-printed shape memory polymers and exploring the design space of thermomechanical metamaterials.
25 February 2022 in International Journal of Solids and Structures